I have configuration, where only jack interface presents (via jackdbus detection). Never had mentioned problem. I'm not sure, wether it will help, still there are my two configurations attached. Although I use just default-jack, I have nobt version, which is same as 'jack', but with commented out bluetooth stuff. If this doesn't help.. usually I use pavucontrol to check what is wrong at pulseaudio side. As for jack... check connections and find another mixer / volume control for alsa card. In Sat, 15 Jun 2019 12:24:11 +0300 "Matwey V. Kornilov" <matwey.kornilov@xxxxxxxxx> wrote: > Hi, > > I am running > > pulseaudio 11.1 > linux kernel 4.12.14 > jackd 1.9.12 > qjackctl qjackctl 0.4.3 > > And I see the following issue: > > Initially module-jackdbus-detect is loaded in my pulseaudio: > > Module #7 > Name: module-jackdbus-detect > Argument: channels=2 > Usage counter: n/a > Properties: > module.author = "David Henningsson" > module.description = "Adds JACK sink/source ports when > JACK is started" > module.version = "11.1-rebootstrapped" > > When I start qjackctl and start jack server the following two modules > are additionally autoloaded: > > Module #54 > Name: module-jack-sink > Argument: connect=yes channels=2 > Usage counter: 0 > Properties: > module.author = "Lennart Poettering" > module.description = "JACK Sink" > module.version = "11.1-rebootstrapped" > > Module #55 > Name: module-jack-source > Argument: connect=yes channels=2 > Usage counter: 0 > Properties: > module.author = "Lennart Poettering" > module.description = "JACK Source" > module.version = "11.1-rebootstrapped" > > Also additional sink and source are available: > > Sink #13 > State: SUSPENDED > Name: jack_out > Description: Jack sink (PulseAudio JACK Sink) > Driver: module-jack-sink.c > Sample Specification: float32le 2ch 48000Hz > Channel Map: front-left,front-right > Owner Module: 54 > Mute: no > Volume: front-left: 64225 / 98% / -0.53 dB, front-right: > 64225 / 98% / -0.53 dB > balance 0.00 > Base Volume: 65536 / 100% / 0.00 dB > Monitor Source: jack_out.monitor > Latency: 0 usec, configured 0 usec > Flags: DECIBEL_VOLUME LATENCY > Properties: > device.api = "jack" > device.description = "Jack sink (PulseAudio JACK > Sink)" jack.client_name = "PulseAudio JACK Sink" > device.icon_name = "audio-card" > Formats: > pcm > > Source #24 > State: SUSPENDED > Name: jack_in > Description: Jack source (PulseAudio JACK Source) > Driver: module-jack-source.c > Sample Specification: float32le 2ch 48000Hz > Channel Map: front-left,front-right > Owner Module: 55 > Mute: no > Volume: front-left: 47186 / 72% / -8.56 dB, front-right: > 47186 / 72% / -8.56 dB > balance 0.00 > Base Volume: 65536 / 100% / 0.00 dB > Monitor of Sink: n/a > Latency: 0 usec, configured 0 usec > Flags: DECIBEL_VOLUME LATENCY > Properties: > device.api = "jack" > device.description = "Jack source (PulseAudio JACK > Source)" jack.client_name = "PulseAudio JACK Source" > device.icon_name = "audio-input-microphone" > Formats: > pcm > > > In pactl info I see that the Default Sink is set to "jack_out" and > Default Source is set to "jack_in". However I see no sound from my > desktop environment. > > But If I do the following manually > > pactl load-module module-jack-sink channels=2 > > I obtain another sink "jack_out.2" which is working. > > In Jackd both "PulseAudio JACK Sink" and "PulseAudio JACK Sink-01" are > connected in the same way to the system playback. > > How could I debug where is the problem here? > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
Attachment:
default-jack.pa
Description: Binary data
Attachment:
default-nobt.pa
Description: Binary data
_______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
