A bit hacky approach, but it allows to preserve LFE output position even in reduced output modes 2.1 and 4.1. Signed-off-by: Nazar Mokrynskyi <nazar at mokrynskyi.com> --- src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf b/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf index 11985bb3..d5d1d653 100644 --- a/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf +++ b/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf @@ -42,7 +42,7 @@ direction = output [Mapping analog-surround-21] device-strings = surround51:%f -channel-map = front-left,front-right,lfe +channel-map = front-left,front-right,aux1,aux2,aux3,lfe paths-output = analog-output direction = output @@ -54,7 +54,7 @@ direction = output [Mapping analog-surround-41] device-strings = surround51:%f -channel-map = front-left,front-right,rear-left,rear-right,lfe +channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe paths-output = analog-output direction = output -- 2.17.1
