(+CC: Mr.Jaska Uimonen) Dear Jaska, I'm trying to get review the patch you've already shared via PA mailing list and Tizen community a few years ago. I hope that you could give valuable comments to Arun's review comments below. Thanks in advance. 2017-03-28 19:36 GMT+09:00 Arun Raghavan <arun at arunraghavan.net>: > On Sat, 27 Aug 2016, at 06:03 PM, Sangchul Lee wrote: >> The original patch is >> - >> https://review.tizen.org/git/?p=platform/upstream/pulseaudio.git;a=commit;h=df1c4275ed79e0b708c75b92f9d247e0492bc1f0 >> - by Jaska Uimonen <jaska.uimonen <at> helsinki.fi> >> >> Signed-off-by: Sangchul Lee <sc11.lee at samsung.com> >> --- >> src/map-file | 4 + >> src/pulse/def.h | 13 ++- >> src/pulse/volume.c | 74 ++++++++++++- >> src/pulse/volume.h | 33 ++++++ >> src/pulsecore/mix.c | 310 >> ++++++++++++++++++++++++++++++++++++++++++++++++++++ >> src/pulsecore/mix.h | 27 +++++ >> 6 files changed, 459 insertions(+), 2 deletions(-) >> >> diff --git a/src/map-file b/src/map-file >> index 93a62b8..ef9b57d 100644 >> --- a/src/map-file >> +++ b/src/map-file >> @@ -138,6 +138,10 @@ pa_cvolume_max_mask; >> pa_cvolume_merge; >> pa_cvolume_min; >> pa_cvolume_min_mask; >> +pa_cvolume_ramp_equal; >> +pa_cvolume_ramp_init; >> +pa_cvolume_ramp_set; >> +pa_cvolume_ramp_channel_ramp_set; >> pa_cvolume_remap; >> pa_cvolume_scale; >> pa_cvolume_scale_mask; >> diff --git a/src/pulse/def.h b/src/pulse/def.h >> index 680bdc9..bc3cedd 100644 >> --- a/src/pulse/def.h >> +++ b/src/pulse/def.h >> @@ -347,11 +347,15 @@ typedef enum pa_stream_flags { >> * consider absolute when the sink is in flat volume mode, >> * relative otherwise. \since 0.9.20 */ >> >> - PA_STREAM_PASSTHROUGH = 0x80000U >> + PA_STREAM_PASSTHROUGH = 0x80000U, >> /**< Used to tag content that will be rendered by passthrough sinks. >> * The data will be left as is and not reformatted, resampled. >> * \since 1.0 */ >> >> + PA_STREAM_START_RAMP_MUTED = 0x100000U >> + /**< Used to tag content that the stream will be started ramp volume >> + * muted so that you can nicely fade it in */ >> + >> } pa_stream_flags_t; >> >> /** \cond fulldocs */ >> @@ -380,6 +384,7 @@ typedef enum pa_stream_flags { >> #define PA_STREAM_FAIL_ON_SUSPEND PA_STREAM_FAIL_ON_SUSPEND >> #define PA_STREAM_RELATIVE_VOLUME PA_STREAM_RELATIVE_VOLUME >> #define PA_STREAM_PASSTHROUGH PA_STREAM_PASSTHROUGH >> +#define PA_STREAM_START_RAMP_MUTED PA_STREAM_START_RAMP_MUTED >> >> /** \endcond */ >> >> @@ -1047,6 +1052,12 @@ typedef enum pa_port_available { >> /** \endcond */ >> #endif >> >> +/** \cond fulldocs */ >> +#define PA_VOLUMER_RAMP_TYPE_LINEAR PA_VOLUMER_RAMP_TYPE_LINEAR >> +#define PA_VOLUMER_RAMP_TYPE_LOGARITHMIC >> PA_VOLUMER_RAMP_TYPE_LOGARITHMIC >> +#define PA_VOLUMER_RAMP_TYPE_CUBIC PA_VOLUMER_RAMP_TYPE_CUBIC >> +/** \endcond */ >> + >> PA_C_DECL_END >> >> #endif >> diff --git a/src/pulse/volume.c b/src/pulse/volume.c >> index 1667b94..85072c1 100644 >> --- a/src/pulse/volume.c >> +++ b/src/pulse/volume.c >> @@ -445,7 +445,10 @@ int pa_cvolume_channels_equal_to(const pa_cvolume >> *a, pa_volume_t v) { >> unsigned c; >> pa_assert(a); >> >> - pa_return_val_if_fail(pa_cvolume_valid(a), 0); >> + if (pa_cvolume_valid(a) == 0) >> + abort(); >> + >> + /* pa_return_val_if_fail(pa_cvolume_valid(a), 0); */ > > Don't know why this was done. Probably not intended to be included here. I think so, i'll remove it in the next patchset. >> pa_return_val_if_fail(PA_VOLUME_IS_VALID(v), 0); >> >> for (c = 0; c < a->channels; c++) >> @@ -977,3 +980,72 @@ pa_cvolume* pa_cvolume_dec(pa_cvolume *v, >> pa_volume_t dec) { >> >> return pa_cvolume_scale(v, m); >> } >> + >> +int pa_cvolume_ramp_equal(const pa_cvolume_ramp *a, const >> pa_cvolume_ramp *b) { >> + int i; >> + pa_assert(a); >> + pa_assert(b); >> + >> + if (PA_UNLIKELY(a == b)) >> + return 1; >> + >> + if (a->channels != b->channels) >> + return 0; >> + >> + for (i = 0; i < a->channels; i++) { >> + if (a->ramps[i].type != b->ramps[i].type || >> + a->ramps[i].length != b->ramps[i].length || >> + a->ramps[i].target != b->ramps[i].target) >> + return 0; >> + } >> + >> + return 1; >> +} >> + >> +pa_cvolume_ramp* pa_cvolume_ramp_init(pa_cvolume_ramp *ramp) { >> + unsigned c; >> + >> + pa_assert(ramp); >> + >> + ramp->channels = 0; >> + >> + for (c = 0; c < PA_CHANNELS_MAX; c++) { >> + ramp->ramps[c].type = PA_VOLUME_RAMP_TYPE_LINEAR; >> + ramp->ramps[c].length = 0; >> + ramp->ramps[c].target = PA_VOLUME_INVALID; >> + } >> + >> + return ramp; >> +} >> + >> +pa_cvolume_ramp* pa_cvolume_ramp_set(pa_cvolume_ramp *ramp, unsigned >> channels, pa_volume_ramp_type_t type, long time, pa_volume_t vol) { >> + int i; >> + >> + pa_assert(ramp); >> + pa_assert(channels > 0); >> + pa_assert(time >= 0); >> + pa_assert(channels <= PA_CHANNELS_MAX); >> + >> + ramp->channels = (uint8_t) channels; >> + >> + for (i = 0; i < ramp->channels; i++) { >> + ramp->ramps[i].type = type; >> + ramp->ramps[i].length = time; >> + ramp->ramps[i].target = PA_CLAMP_VOLUME(vol); >> + } >> + >> + return ramp; >> +} >> + >> +pa_cvolume_ramp* pa_cvolume_ramp_channel_ramp_set(pa_cvolume_ramp *ramp, >> unsigned channel, pa_volume_ramp_type_t type, long time, pa_volume_t vol) >> { >> + >> + pa_assert(ramp); >> + pa_assert(channel <= ramp->channels); >> + pa_assert(time >= 0); >> + >> + ramp->ramps[channel].type = type; >> + ramp->ramps[channel].length = time; >> + ramp->ramps[channel].target = PA_CLAMP_VOLUME(vol); >> + >> + return ramp; >> +} >> diff --git a/src/pulse/volume.h b/src/pulse/volume.h >> index 8cf4fa4..2ae3451 100644 >> --- a/src/pulse/volume.h >> +++ b/src/pulse/volume.h >> @@ -431,6 +431,39 @@ pa_cvolume* pa_cvolume_inc(pa_cvolume *v, >> pa_volume_t inc); >> * the channels are kept. \since 0.9.16 */ >> pa_cvolume* pa_cvolume_dec(pa_cvolume *v, pa_volume_t dec); >> >> +/** Volume ramp type >> +*/ >> +typedef enum pa_volume_ramp_type { >> + PA_VOLUME_RAMP_TYPE_LINEAR = 0, /**< linear */ >> + PA_VOLUME_RAMP_TYPE_LOGARITHMIC = 1, /**< logarithmic */ >> + PA_VOLUME_RAMP_TYPE_CUBIC = 2, >> +} pa_volume_ramp_type_t; >> + >> +/** A structure encapsulating a volume ramp */ >> +typedef struct pa_volume_ramp_t { >> + pa_volume_ramp_type_t type; >> + long length; > > Is length in us? Should be pa_usec_t. > >> + pa_volume_t target; >> +} pa_volume_ramp_t; > > We use the _t suffix for simple typedef'd types so this can be > pa_volume_ramp (as can pa_volume_ramp_int). > >> +/** A structure encapsulating a multichannel volume ramp */ >> +typedef struct pa_cvolume_ramp { >> + uint8_t channels; >> + pa_volume_ramp_t ramps[PA_CHANNELS_MAX]; >> +} pa_cvolume_ramp; > > I'm wondering it makes sense for pa_cvolume_ramp to have one copy of the > ramp type for every channel. Do we ever want to support ramping > different channels differently? Or is it just for the convenience of > embedding an array of pa_volume_ramp_ts? It seems reasonable to have only one ramping value instead of each channel. but need to be checked by original author's intention. >> + >> +/** Return non-zero when *a == *b */ >> +int pa_cvolume_ramp_equal(const pa_cvolume_ramp *a, const >> pa_cvolume_ramp *b); >> + >> +/** Init volume ramp struct */ >> +pa_cvolume_ramp* pa_cvolume_ramp_init(pa_cvolume_ramp *ramp); >> + >> +/** Set first n channels of ramp struct to certain value */ >> +pa_cvolume_ramp* pa_cvolume_ramp_set(pa_cvolume_ramp *ramp, unsigned >> channel, pa_volume_ramp_type_t type, long time, pa_volume_t vol); >> + >> +/** Set individual channel in the channel struct */ >> +pa_cvolume_ramp* pa_cvolume_ramp_channel_ramp_set(pa_cvolume_ramp *ramp, >> unsigned channel, pa_volume_ramp_type_t type, long time, pa_volume_t >> vol); >> + >> PA_C_DECL_END >> >> #endif >> diff --git a/src/pulsecore/mix.c b/src/pulsecore/mix.c >> index 59622d7..1e4cc1e 100644 >> --- a/src/pulsecore/mix.c >> +++ b/src/pulsecore/mix.c >> @@ -724,3 +724,313 @@ void pa_volume_memchunk( >> >> pa_memblock_release(c->memblock); >> } >> + >> +static void calc_linear_integer_volume_no_mapping(int32_t linear[], >> float volume[], unsigned nchannels) { >> + unsigned channel, padding; >> + >> + pa_assert(linear); >> + pa_assert(volume); >> + >> + for (channel = 0; channel < nchannels; channel++) >> + linear[channel] = (int32_t) lrint(volume[channel] * 0x10000U); >> + >> + for (padding = 0; padding < VOLUME_PADDING; padding++, channel++) >> + linear[channel] = linear[padding]; >> +} > > Just a comment (can be done later), but it would be nice to have common > code like this and the version with mapping in a single function > controlled by a bool variable, so we avoid code repetition. Okay. >> +static void calc_linear_float_volume_no_mapping(float linear[], float >> volume[], unsigned nchannels) { >> + unsigned channel, padding; >> + >> + pa_assert(linear); >> + pa_assert(volume); >> + >> + for (channel = 0; channel < nchannels; channel++) >> + linear[channel] = volume[channel]; >> + >> + for (padding = 0; padding < VOLUME_PADDING; padding++, channel++) >> + linear[channel] = linear[padding]; >> +} >> + >> +typedef void (*pa_calc_volume_no_mapping_func_t) (void *volumes, float >> *volume, int channels); >> + >> +static const pa_calc_volume_no_mapping_func_t >> calc_volume_table_no_mapping[] = { >> + [PA_SAMPLE_U8] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_ALAW] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_ULAW] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S16LE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S16BE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_FLOAT32LE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_float_volume_no_mapping, >> + [PA_SAMPLE_FLOAT32BE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_float_volume_no_mapping, >> + [PA_SAMPLE_S32LE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S32BE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S24LE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S24BE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S24_32LE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping, >> + [PA_SAMPLE_S24_32BE] = (pa_calc_volume_no_mapping_func_t) >> calc_linear_integer_volume_no_mapping >> +}; >> + >> +static const unsigned format_sample_size_table[] = { >> + [PA_SAMPLE_U8] = 1, >> + [PA_SAMPLE_ALAW] = 1, >> + [PA_SAMPLE_ULAW] = 1, >> + [PA_SAMPLE_S16LE] = 2, >> + [PA_SAMPLE_S16BE] = 2, >> + [PA_SAMPLE_FLOAT32LE] = 4, >> + [PA_SAMPLE_FLOAT32BE] = 4, >> + [PA_SAMPLE_S32LE] = 4, >> + [PA_SAMPLE_S32BE] = 4, >> + [PA_SAMPLE_S24LE] = 3, >> + [PA_SAMPLE_S24BE] = 3, >> + [PA_SAMPLE_S24_32LE] = 4, >> + [PA_SAMPLE_S24_32BE] = 4 >> +}; > > We already have pa_sample_size_of_format(). I'll modify to use that. >> +static float calc_volume_ramp_linear(pa_volume_ramp_int_t *ramp) { >> + pa_assert(ramp); >> + pa_assert(ramp->length > 0); >> + >> + /* basic linear interpolation */ >> + return ramp->start + (ramp->length - ramp->left) * (ramp->end - >> ramp->start) / (float) ramp->length; >> +} >> + >> +static float calc_volume_ramp_logarithmic(pa_volume_ramp_int_t *ramp) { >> + float x_val, s, e; >> + long temp; >> + >> + pa_assert(ramp); >> + pa_assert(ramp->length > 0); >> + >> + if (ramp->end > ramp->start) { >> + temp = ramp->left; >> + s = ramp->end; >> + e = ramp->start; >> + } else { >> + temp = ramp->length - ramp->left; >> + s = ramp->start; >> + e = ramp->end; >> + } >> + >> + x_val = temp == 0 ? 0.0 : powf(temp, 10); >> + >> + /* base 10 logarithmic interpolation */ >> + return s + x_val * (e - s) / powf(ramp->length, 10); >> +} >> + >> +static float calc_volume_ramp_cubic(pa_volume_ramp_int_t *ramp) { >> + float x_val, s, e; >> + long temp; >> + >> + pa_assert(ramp); >> + pa_assert(ramp->length > 0); >> + >> + if (ramp->end > ramp->start) { >> + temp = ramp->left; >> + s = ramp->end; >> + e = ramp->start; >> + } else { >> + temp = ramp->length - ramp->left; >> + s = ramp->start; >> + e = ramp->end; >> + } >> + >> + x_val = temp == 0 ? 0.0 : cbrtf(temp); >> + >> + /* cubic interpolation */ >> + return s + x_val * (e - s) / cbrtf(ramp->length); >> +} >> + >> +typedef float (*pa_calc_volume_ramp_func_t) (pa_volume_ramp_int_t *); >> + >> +static const pa_calc_volume_ramp_func_t calc_volume_ramp_table[] = { >> + [PA_VOLUME_RAMP_TYPE_LINEAR] = (pa_calc_volume_ramp_func_t) >> calc_volume_ramp_linear, >> + [PA_VOLUME_RAMP_TYPE_LOGARITHMIC] = (pa_calc_volume_ramp_func_t) >> calc_volume_ramp_logarithmic, >> + [PA_VOLUME_RAMP_TYPE_CUBIC] = (pa_calc_volume_ramp_func_t) >> calc_volume_ramp_cubic >> +}; >> + >> +static void calc_volume_ramps(pa_cvolume_ramp_int *ram, float *vol) >> +{ >> + int i; >> + >> + for (i = 0; i < ram->channels; i++) { >> + if (ram->ramps[i].left <= 0) { >> + if (ram->ramps[i].target == PA_VOLUME_NORM) { >> + vol[i] = 1.0; >> + } >> + } else { >> + vol[i] = ram->ramps[i].curr = >> calc_volume_ramp_table[ram->ramps[i].type] (&ram->ramps[i]); >> + ram->ramps[i].left--; >> + } >> + } >> +} >> + >> +void pa_volume_ramp_memchunk( >> + pa_memchunk *c, >> + const pa_sample_spec *spec, >> + pa_cvolume_ramp_int *ramp) { >> + >> + void *ptr; >> + volume_val linear[PA_CHANNELS_MAX + VOLUME_PADDING]; >> + float vol[PA_CHANNELS_MAX + VOLUME_PADDING]; >> + pa_do_volume_func_t do_volume; >> + long length_in_frames; >> + int i; >> + >> + pa_assert(c); >> + pa_assert(spec); >> + pa_assert(pa_frame_aligned(c->length, spec)); >> + pa_assert(ramp); >> + >> + length_in_frames = c->length / >> format_sample_size_table[spec->format] / spec->channels; >> + >> + if (pa_memblock_is_silence(c->memblock)) { >> + for (i = 0; i < ramp->channels; i++) { >> + if (ramp->ramps[i].length > 0) >> + ramp->ramps[i].length -= length_in_frames; >> + } >> + return; >> + } >> + >> + if (spec->format < 0 || spec->format >= PA_SAMPLE_MAX) { >> + pa_log_warn("Unable to change volume of format"); >> + return; >> + } >> + >> + do_volume = pa_get_volume_func(spec->format); >> + pa_assert(do_volume); >> + >> + ptr = (uint8_t*) pa_memblock_acquire(c->memblock) + c->index; >> + >> + for (i = 0; i < length_in_frames; i++) { >> + calc_volume_ramps(ramp, vol); >> + calc_volume_table_no_mapping[spec->format] ((void *)linear, vol, >> spec->channels); >> + >> + /* we only process one frame per iteration */ >> + do_volume (ptr, (void *)linear, spec->channels, >> format_sample_size_table[spec->format] * spec->channels); >> + >> + /* pa_log_debug("1: %d 2: %d", linear[0], linear[1]); */ >> + >> + ptr = (uint8_t*)ptr + format_sample_size_table[spec->format] * >> spec->channels; >> + } >> + >> + pa_memblock_release(c->memblock); >> +} >> + >> +pa_cvolume_ramp_int* pa_cvolume_ramp_convert(const pa_cvolume_ramp *src, >> pa_cvolume_ramp_int *dst, int sample_rate) { >> + >> + int i, j, channels, remaining_channels; >> + float temp; >> + >> + if (dst->channels < src->channels) { >> + channels = dst->channels; >> + remaining_channels = 0; >> + } >> + else { > > Style check -- else should be on the same line as }. Same thing below > too. Okay. >> + channels = src->channels; >> + remaining_channels = dst->channels; >> + } >> + >> + for (i = 0; i < channels; i++) { >> + dst->ramps[i].type = src->ramps[i].type; >> + /* ms to samples */ >> + dst->ramps[i].length = src->ramps[i].length * sample_rate / >> 1000; > > This is a bit awkward -- either the units should be time (in us, so the > API is consistent), or they should be in samples and you need to keep > the rate somewhere so the context of that length is not lost (what if > the rate changes during the course of a ramp?). I think the usage intends samples but the naming seems not proper. some revisions are needed either way. (and currently codes seems not ready for the rate changes as you commented, it can be considered in near future) >> + dst->ramps[i].left = dst->ramps[i].length; >> + dst->ramps[i].start = dst->ramps[i].end; >> + dst->ramps[i].target = src->ramps[i].target; >> + /* scale to pulse internal mapping so that when ramp is over >> there's no glitch in volume */ >> + temp = src->ramps[i].target / (float)0x10000U; >> + dst->ramps[i].end = temp * temp * temp; >> + } >> + >> + j = i; >> + >> + for (i--; j < remaining_channels; j++) { >> + dst->ramps[j].type = dst->ramps[i].type; >> + dst->ramps[j].length = dst->ramps[i].length; >> + dst->ramps[j].left = dst->ramps[i].left; >> + dst->ramps[j].start = dst->ramps[i].start; >> + dst->ramps[j].target = dst->ramps[i].target; >> + dst->ramps[j].end = dst->ramps[i].end; >> + } > > This seems weird. The remaining channels get the same as the original > set of channels, but in reverse? What if j > 2i? looks weird.. but if it is possible to have one ramp value, these codes also can be removed. >> + return dst; >> +} >> + >> +bool pa_cvolume_ramp_active(pa_cvolume_ramp_int *ramp) { >> + int i; >> + >> + for (i = 0; i < ramp->channels; i++) { >> + if (ramp->ramps[i].left > 0) >> + return true; >> + } >> + >> + return false; >> +} >> + >> +bool pa_cvolume_ramp_target_active(pa_cvolume_ramp_int *ramp) { >> + int i; >> + >> + for (i = 0; i < ramp->channels; i++) { >> + if (ramp->ramps[i].target != PA_VOLUME_NORM) >> + return true; >> + } >> + >> + return false; >> +} >> + >> +pa_cvolume * pa_cvolume_ramp_get_targets(pa_cvolume_ramp_int *ramp, >> pa_cvolume *volume) { >> + int i = 0; >> + >> + volume->channels = ramp->channels; >> + >> + for (i = 0; i < ramp->channels; i++) >> + volume->values[i] = ramp->ramps[i].target; >> + >> + return volume; >> +} >> + >> +pa_cvolume_ramp_int* pa_cvolume_ramp_start_from(pa_cvolume_ramp_int >> *src, pa_cvolume_ramp_int *dst) { >> + int i; >> + >> + for (i = 0; i < src->channels; i++) { > > Need a sanity check for src vs. dst channel counts, and what to do when > they are not equal. > >> + /* if new vols are invalid, copy old ramp i.e. no effect */ >> + if (dst->ramps[i].target == PA_VOLUME_INVALID) >> + dst->ramps[i] = src->ramps[i]; >> + /* if there's some old ramp still left */ >> + else if (src->ramps[i].left > 0) >> + dst->ramps[i].start = src->ramps[i].curr; >> + } >> + >> + return dst; >> +} >> + >> +pa_cvolume_ramp_int* pa_cvolume_ramp_int_init(pa_cvolume_ramp_int *src, >> pa_volume_t vol, int channels) { >> + int i; >> + float temp; >> + >> + src->channels = channels; >> + >> + for (i = 0; i < channels; i++) { >> + src->ramps[i].type = PA_VOLUME_RAMP_TYPE_LINEAR; >> + src->ramps[i].length = 0; >> + src->ramps[i].left = 0; >> + if (vol == PA_VOLUME_NORM) { >> + src->ramps[i].start = 1.0; >> + src->ramps[i].end = 1.0; >> + src->ramps[i].curr = 1.0; >> + } >> + else if (vol == PA_VOLUME_MUTED) { >> + src->ramps[i].start = 0.0; >> + src->ramps[i].end = 0.0; >> + src->ramps[i].curr = 0.0; >> + } >> + else { >> + temp = vol / (float)0x10000U; >> + src->ramps[i].start = temp * temp * temp; >> + src->ramps[i].end = src->ramps[i].start; >> + src->ramps[i].curr = src->ramps[i].start; >> + } > > All this seems a bit repetitive. Easier to do something like: > > if (vol == PA_VOLUME_NORM) > temp = 1.0; > else if (...) > temp = ...; > else if (...) > temp = ...; > > src->ramps[i].start = temp; > src->ramps[i].end = temp; > src->ramps[i].curr = temp; > I'll apply that in the next patchset. >> + src->ramps[i].target = vol; >> + } >> + >> + return src; >> +} >> diff --git a/src/pulsecore/mix.h b/src/pulsecore/mix.h >> index 8102bcd..0f86b6f 100644 >> --- a/src/pulsecore/mix.h >> +++ b/src/pulsecore/mix.h >> @@ -59,4 +59,31 @@ void pa_volume_memchunk( >> const pa_sample_spec *spec, >> const pa_cvolume *volume); >> >> +typedef struct pa_volume_ramp_int_t { >> + pa_volume_ramp_type_t type; >> + long length; >> + long left; >> + float start; >> + float end; >> + float curr; >> + pa_volume_t target; > > This structure needs to be documented so it is easier to understand what > state all of this represents. > Okay. >> +} pa_volume_ramp_int_t; >> + >> +typedef struct pa_cvolume_ramp_int { >> + uint8_t channels; >> + pa_volume_ramp_int_t ramps[PA_CHANNELS_MAX]; >> +} pa_cvolume_ramp_int; > > Same comment as before -- we seem to have the ability to have a > different type per channel. Is this just for convenience? > >> +pa_cvolume_ramp_int* pa_cvolume_ramp_convert(const pa_cvolume_ramp *src, >> pa_cvolume_ramp_int *dst, int sample_rate); >> +bool pa_cvolume_ramp_active(pa_cvolume_ramp_int *ramp); >> +bool pa_cvolume_ramp_target_active(pa_cvolume_ramp_int *ramp); >> +pa_cvolume_ramp_int* pa_cvolume_ramp_start_from(pa_cvolume_ramp_int >> *src, pa_cvolume_ramp_int *dst); >> +pa_cvolume_ramp_int* pa_cvolume_ramp_int_init(pa_cvolume_ramp_int *src, >> pa_volume_t vol, int channels); >> +pa_cvolume * pa_cvolume_ramp_get_targets(pa_cvolume_ramp_int *ramp, >> pa_cvolume *volume); >> + >> +void pa_volume_ramp_memchunk( >> + pa_memchunk *c, >> + const pa_sample_spec *spec, >> + pa_cvolume_ramp_int *ramp); >> + >> #endif >> -- > > -- Arun
