On Tue, 21 Mar 2017, at 02:26 PM, Hans de Goede wrote: > Hi, > > On 21-03-17 08:54, Arun Raghavan wrote: > > On Tue, 21 Mar 2017, at 11:10 AM, Takashi Iwai wrote: > >> On Tue, 21 Mar 2017 00:09:22 +0100, > >> Pierre-Louis Bossart wrote: > >>> > >>> On 3/20/17 4:52 AM, Takashi Iwai wrote: > >>>> On Mon, 20 Mar 2017 12:42:58 +0100, > >>>> Hans de Goede wrote: > >>>>> > >>>>> Hi, > >>>>> > >>>>> Lately I've been working on fixing various issues people > >>>>> are having with baytrail / cherrytrail devices. One thing > >>>>> I noticed when moving my testing / development to 4.11 is > >>>>> that pulseaudio does not work (it aborts while starting) > >>>>> this seemed to be caused by the new snd_hdmi_lpe_audio > >>>>> module. If I blacklist that all is fine. Any idea what > >>>>> is causing this ? > >>>> > >>>> I noticed it once, too, but I had no time to check further. > >>>> More interestingly, PA works fine when LPE audio is the single driver > >>>> (i.e. blacklist Intel SST instead), too. So it's more likely a bug in > >>>> PA. > >>>> > >>>> What happens when you modprobe LPE audio driver after starting the > >>>> session? If it kills PA, we can debug more easily :) > >>> > >>> I've seen this as well, I could get either one of the two but not > >>> both, could this be due to the fact that one set of mixers is > >>> configured with UCM and the other driver isn't configured by UCM? > >> > >> No idea, and I had still no time to check (still processing the > >> pile of pending mails and other bugs :). Let me add PA guys to Cc. > > > > Not sure if anyone here has the hardware and I haven't seen any > > complaints either -- having a backtrace (or even location of the assert) > > would be a good start. > > Ok, this is weird. Since you were asking for more info I tried to > collect a backtrace / logs. But what is happening is that after > the snd_hdmi_lpe_audio module loads, pulse does its thing and > then exits with a message of "killed" in gdb / on the terminal > from which I started it. I don't get a chance to get a backtrace > in gdb ... So this does feel like a kernel bug to me, normally > this sort of "killed" behavior is seen on some kernel oopses... > > But dmesg is free of any oopses ? > > Anyways here is a log of pulseaudio -v first without the > hdmi module and then the module gets probed. Where the log > abruptly ends is where I got the "Killed" message on the > terminal. That's the kernel killing of PA for exceeding RT limits (there's a patch in the timers tip that'll now provide an error in dmesg). It sounds possible that there is some call to the ALSA API that we are making that results in the driver blocking for long enough to exceed the RT limit. You can verify this by setting 'realtime-scheduling = no' in /etc/pulse/daemon.conf and then starting PA. If that works, perf will likely be able to show you what's blocking. -- Arun
