Hello, i pasted your fixed version at the end of my /etc/pulse/default.pa and changed the alsa_output.pci-0000_01_00.1.hdmi-stereo to what i got from pacmd list-sinks | grep -e "name:" -e "index". And I have no audio now, is there anything else i need to do for this to work? I'm on fedora if that helps. On Wed, Mar 15, 2017 at 1:00 PM, < pulseaudio-discuss-request at lists.freedesktop.org> wrote: > Send pulseaudio-discuss mailing list submissions to > pulseaudio-discuss at lists.freedesktop.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > or, via email, send a message with subject or body 'help' to > pulseaudio-discuss-request at lists.freedesktop.org > > You can reach the person managing the list at > pulseaudio-discuss-owner at lists.freedesktop.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of pulseaudio-discuss digest..." > > > Today's Topics: > > 1. Re: [PATCH v4] bluez5-util: Disconnect AG devices when ofono > is started and headset=auto (Tanu Kaskinen) > 2. Dynamic range compression (Smurf En Drek) > 3. Re: [PATCH v4] bluez5-util: Disconnect AG devices when ofono > is started and headset=auto (Georg Chini) > 4. Re: Dynamic range compression (Daniel) > 5. Re: Dynamic range compression (Daniel) > 6. module-alsa-sink device (Tadej Panjtar) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 15 Mar 2017 00:35:04 +0200 > From: Tanu Kaskinen <tanuk at iki.fi> > To: pulseaudio-discuss at lists.freedesktop.org > Subject: Re: [pulseaudio-discuss] [PATCH v4] bluez5-util: Disconnect > AG devices when ofono is started and headset=auto > Message-ID: <1489530904.2838.0.camel at iki.fi> > Content-Type: text/plain; charset="UTF-8" > > On Tue, 2017-03-14 at 07:34 +0100, Georg Chini wrote: > > With headset=auto it is possible that AG devices are connected and > handled > > via the native backend when ofono is started. Because the HS role will > then > > be disabled in the native backend, AG devices must be disconnected and > any > > future connections will be handled by ofono. > > --- > > src/modules/bluetooth/bluez5-util.c | 18 ++++++++++++++++++ > > 1 file changed, 18 insertions(+) > > Looks good to me. > > -- > Tanu > > https://www.patreon.com/tanuk > > > ------------------------------ > > Message: 2 > Date: Wed, 15 Mar 2017 01:35:40 +0100 > From: Smurf En Drek <smurfendrek123 at gmail.com> > To: pulseaudio-discuss at lists.freedesktop.org > Subject: [pulseaudio-discuss] Dynamic range compression > Message-ID: > <CAJCatKhBc+zEFfAMAv-MV6V9FX8xVR_Aku=FZpcrDXGmKN13Q > w at mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > What is the best way to get system wide audio dynamic range compression? I > have seen some very complicated solutions to this seemingly simple problem. > What currently is the best way of doing this? > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <https://lists.freedesktop.org/archives/pulseaudio- > discuss/attachments/20170315/7236cca2/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Wed, 15 Mar 2017 07:04:16 +0100 > From: Georg Chini <georg at chini.tk> > To: General PulseAudio Discussion > <pulseaudio-discuss at lists.freedesktop.org> > Subject: Re: [pulseaudio-discuss] [PATCH v4] bluez5-util: Disconnect > AG devices when ofono is started and headset=auto > Message-ID: <dfd40261-e3ef-cd36-b4b2-ae1cc603e321 at chini.tk> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 14.03.2017 23:35, Tanu Kaskinen wrote: > > On Tue, 2017-03-14 at 07:34 +0100, Georg Chini wrote: > >> With headset=auto it is possible that AG devices are connected and > handled > >> via the native backend when ofono is started. Because the HS role will > then > >> be disabled in the native backend, AG devices must be disconnected and > any > >> future connections will be handled by ofono. > >> --- > >> src/modules/bluetooth/bluez5-util.c | 18 ++++++++++++++++++ > >> 1 file changed, 18 insertions(+) > > Looks good to me. > > > Thanks, pushed. > > > > ------------------------------ > > Message: 4 > Date: Wed, 15 Mar 2017 07:44:15 +0100 > From: Daniel <windseeker at gmx.de> > To: General PulseAudio Discussion > <pulseaudio-discuss at lists.freedesktop.org> > Subject: Re: [pulseaudio-discuss] Dynamic range compression > Message-ID: > <CAJd=37nYXBcqbzqMC6p7jyCCTC5NBpJrWiXW2VrZSF4YMqCb7A at mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have this in my /etc/pulse/default.pa > > load-module module-ladspa-sink sink_name=ladspa_compressor > master=alsa_output.pci-0000_01_00.1.hdmi-stereo plugin=dyson_compress_1403 > label=dysonCompress control=0,1,0.5,0.99 > load-module module-ladspa-sink sink_name=ladspa_limiter master=ladspa_sink > plugin=fast_lookahead_limiter_1913 label=fastLookaheadLimiter > control=10,0,0.8 > set-default-sink ladspa_limiter > > You need to replace "master=alsa_output.pci-0000_01_00.1.hdmi-stereo" with > your preferred hardware sink. > > Drawback: If this hardware sink is going away, e.g. because you change > profiles, unplug the monitor that provides this profile, switching the > soundcards' profile to off, etc.pp., then pulseaudio just hard crashes > right away and refuses to restart until this profile comes back again or > you comment out these lines in default.pa. > > Regards, > Daniel > > 2017-03-15 1:35 GMT+01:00 Smurf En Drek <smurfendrek123 at gmail.com>: > > > What is the best way to get system wide audio dynamic range compression? > I > > have seen some very complicated solutions to this seemingly simple > problem. > > What currently is the best way of doing this? > > > > _______________________________________________ > > pulseaudio-discuss mailing list > > pulseaudio-discuss at lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <https://lists.freedesktop.org/archives/pulseaudio- > discuss/attachments/20170315/d4e7dc61/attachment-0001.html> > > ------------------------------ > > Message: 5 > Date: Wed, 15 Mar 2017 07:51:28 +0100 > From: Daniel <windseeker at gmx.de> > To: General PulseAudio Discussion > <pulseaudio-discuss at lists.freedesktop.org> > Subject: Re: [pulseaudio-discuss] Dynamic range compression > Message-ID: > <CAJd=37m8xK24Cic3-pY0mUOGifpPEBPeGGkJKhz3K0LmR2P > 1GQ at mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hmmm while wrote this mail I changed some sink names to a more sane name, > but failed to do correctly. The master sink for the limiter is not correct. > > Here the working version: > > load-module module-ladspa-sink sink_name=ladspa_compressor > master=alsa_output.pci-0000_01_00.1.hdmi-stereo plugin=dyson_compress_1403 > label=dysonCompress control=0,1,0.5,0.99 > load-module module-ladspa-sink sink_name=ladspa_limiter > master=ladspa_compressor plugin=fast_lookahead_limiter_1913 > label=fastLookaheadLimiter control=10,0,0.8 > set-default-sink ladspa_limiter > > > > 2017-03-15 7:44 GMT+01:00 Daniel <windseeker at gmx.de>: > > > I have this in my /etc/pulse/default.pa > > > > load-module module-ladspa-sink sink_name=ladspa_compressor > > master=alsa_output.pci-0000_01_00.1.hdmi-stereo > > plugin=dyson_compress_1403 label=dysonCompress control=0,1,0.5,0.99 > > load-module module-ladspa-sink sink_name=ladspa_limiter > master=ladspa_sink > > plugin=fast_lookahead_limiter_1913 label=fastLookaheadLimiter > > control=10,0,0.8 > > set-default-sink ladspa_limiter > > > > You need to replace "master=alsa_output.pci-0000_01_00.1.hdmi-stereo" > > with your preferred hardware sink. > > > > Drawback: If this hardware sink is going away, e.g. because you change > > profiles, unplug the monitor that provides this profile, switching the > > soundcards' profile to off, etc.pp., then pulseaudio just hard crashes > > right away and refuses to restart until this profile comes back again or > > you comment out these lines in default.pa. > > > > Regards, > > Daniel > > > > 2017-03-15 1:35 GMT+01:00 Smurf En Drek <smurfendrek123 at gmail.com>: > > > >> What is the best way to get system wide audio dynamic range compression? > >> I have seen some very complicated solutions to this seemingly simple > >> problem. What currently is the best way of doing this? > >> > >> _______________________________________________ > >> pulseaudio-discuss mailing list > >> pulseaudio-discuss at lists.freedesktop.org > >> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > >> > >> > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <https://lists.freedesktop.org/archives/pulseaudio- > discuss/attachments/20170315/6b6aadb5/attachment-0001.html> > > ------------------------------ > > Message: 6 > Date: Wed, 15 Mar 2017 07:57:07 +0100 > From: Tadej Panjtar <tadej.panjtar at gmail.com> > To: pulseaudio-discuss at lists.freedesktop.org > Subject: [pulseaudio-discuss] module-alsa-sink device > Message-ID: > <CAF315RWfkdZ0EQ596_iiQ_Vg7dW1WW-X0Nu4iTRgY0BoyzfNeA@ > mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi! > > I Migrated from pulseaudio version 4.0 to 8.0 and the following command > does not work anymore: > load-module module-alsa-sink device="hw:2,7" sink_name=seat1 > > E: [pulseaudio] module.c: Failed to load module "module-alsa-sink" > (argument: "device="hw:2,7" sink_name=seat1"): initialization failed. > E: [pulseaudio] main.c: Module load failed. > > What is wrong? > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <https://lists.freedesktop.org/archives/pulseaudio- > discuss/attachments/20170315/63e8ee50/attachment-0001.html> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > > > ------------------------------ > > End of pulseaudio-discuss Digest, Vol 71, Issue 30 > ************************************************** > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20170315/1650eee2/attachment-0001.html>
