From: Wim Taymans <wim.taymans@xxxxxxxxx> This is a rebase of Wim Taymans patch to support the HSP headset role that has somehow been forgotten. Original patch can be found at https://lists.freedesktop.org/archives/pulseaudio-discuss/2015-February/023242.html Rebase and minor changes by Georg Chini. In addition to the HSP Audio Gateway, also add support for the headset role in the native bluetooth backend. In this role, pulseaudio is used as headset. In the headset role, we create source and sink to receive and send the samples from the gateway, respectively. Module-bluetooth-policy will automatically load loopback modules to link these to a sink and source for playback. Because this makes the source the speaker and the sink the microphone, we need to reverse the roles of source and sink compared to the gateway role. In the gateway role, adjusting the sink volume generates a +VGS command to set the volume on the headset. Likewise, receiving AT+VGS updates the sink volume. In the headset role, receiving a +VGS should set the source volume and any source volume changes should be reported back to the gateway with AT+VGS. --- src/modules/bluetooth/backend-native.c | 269 ++++++++++++++++++++++----- src/modules/bluetooth/module-bluez5-device.c | 34 +++- 2 files changed, 251 insertions(+), 52 deletions(-) diff --git a/src/modules/bluetooth/backend-native.c b/src/modules/bluetooth/backend-native.c index 2a5a13a..71f1773 100644 --- a/src/modules/bluetooth/backend-native.c +++ b/src/modules/bluetooth/backend-native.c @@ -44,9 +44,11 @@ struct pa_bluetooth_backend { PA_LLIST_HEAD(pa_dbus_pending, pending); }; -struct transport_rfcomm { +struct transport_data { int rfcomm_fd; pa_io_event *rfcomm_io; + int sco_fd; + pa_io_event *sco_io; pa_mainloop_api *mainloop; }; @@ -59,6 +61,10 @@ struct transport_rfcomm { #define BLUEZ_PROFILE_INTERFACE BLUEZ_SERVICE ".Profile1" #define HSP_AG_PROFILE "/Profile/HSPAGProfile" +#define HSP_HS_PROFILE "/Profile/HSPHSProfile" + +/* RFCOMM channel for HSP headset role */ +#define HSP_HS_DEFAULT_CHANNEL 3 #define PROFILE_INTROSPECT_XML \ DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE \ @@ -100,7 +106,7 @@ static pa_dbus_pending* send_and_add_to_pending(pa_bluetooth_backend *backend, D return p; } -static int bluez5_sco_acquire_cb(pa_bluetooth_transport *t, bool optional, size_t *imtu, size_t *omtu) { +static int sco_do_connect(pa_bluetooth_transport *t) { pa_bluetooth_device *d = t->device; struct sockaddr_sco addr; socklen_t len; @@ -145,6 +151,46 @@ static int bluez5_sco_acquire_cb(pa_bluetooth_transport *t, bool optional, size_ pa_log_error("connect(): %s", pa_cstrerror(errno)); goto fail_close; } + return sock; + +fail_close: + close(sock); + return -1; +} + +static int sco_do_accept(pa_bluetooth_transport *t) { + struct transport_data *trd = t->userdata; + struct sockaddr_sco addr; + socklen_t optlen; + int sock; + + memset(&addr, 0, sizeof(addr)); + optlen = sizeof(addr); + + pa_log_info ("doing accept"); + sock = accept(trd->sco_fd, (struct sockaddr *) &addr, &optlen); + if (sock < 0) { + if (errno != EAGAIN) + pa_log_error("accept(): %s", pa_cstrerror(errno)); + goto fail; + } + return sock; + +fail: + return -1; +} + +static int sco_acquire_cb(pa_bluetooth_transport *t, bool optional, size_t *imtu, size_t *omtu) { + int sock; + socklen_t len; + + if (optional) + sock = sco_do_accept(t); + else + sock = sco_do_connect(t); + + if (sock < 0) + goto fail; if (imtu) *imtu = 48; if (omtu) *omtu = 48; @@ -165,16 +211,81 @@ static int bluez5_sco_acquire_cb(pa_bluetooth_transport *t, bool optional, size_ return sock; -fail_close: - close(sock); +fail: return -1; } -static void bluez5_sco_release_cb(pa_bluetooth_transport *t) { +static void sco_release_cb(pa_bluetooth_transport *t) { pa_log_info("Transport %s released", t->path); /* device will close the SCO socket for us */ } +static void sco_io_callback(pa_mainloop_api *io, pa_io_event *e, int fd, pa_io_event_flags_t events, void *userdata) { + pa_bluetooth_transport *t = userdata; + + pa_assert(io); + pa_assert(t); + + if (events & (PA_IO_EVENT_HANGUP|PA_IO_EVENT_ERROR)) { + pa_log_error("error listening SCO connection: %s", pa_cstrerror(errno)); + goto fail; + } + + if (t->state != PA_BLUETOOTH_TRANSPORT_STATE_PLAYING) { + pa_log_info("SCO incoming connection: changing state to PLAYING"); + pa_bluetooth_transport_set_state (t, PA_BLUETOOTH_TRANSPORT_STATE_PLAYING); + } + +fail: + return; +} + +static int sco_listen(pa_bluetooth_transport *t) { + struct transport_data *trd = t->userdata; + struct sockaddr_sco addr; + int sock, i; + bdaddr_t src; + const char *src_addr; + + sock = socket(PF_BLUETOOTH, SOCK_SEQPACKET | SOCK_NONBLOCK | SOCK_CLOEXEC, BTPROTO_SCO); + if (sock < 0) { + pa_log_error("socket(SEQPACKET, SCO) %s", pa_cstrerror(errno)); + return -1; + } + + src_addr = t->device->adapter->address; + + /* don't use ba2str to avoid -lbluetooth */ + for (i = 5; i >= 0; i--, src_addr += 3) + src.b[i] = strtol(src_addr, NULL, 16); + + /* Bind to local address */ + memset(&addr, 0, sizeof(addr)); + addr.sco_family = AF_BLUETOOTH; + bacpy(&addr.sco_bdaddr, &src); + + if (bind(sock, (struct sockaddr *) &addr, sizeof(addr)) < 0) { + pa_log_error("bind(): %s", pa_cstrerror(errno)); + goto fail_close; + } + + pa_log_info ("doing listen"); + if (listen(sock, 1) < 0) { + pa_log_error("listen(): %s", pa_cstrerror(errno)); + goto fail_close; + } + + trd->sco_fd = sock; + trd->sco_io = trd->mainloop->io_new(trd->mainloop, sock, PA_IO_EVENT_INPUT, + sco_io_callback, t); + + return sock; + +fail_close: + close(sock); + return -1; +} + static void register_profile_reply(DBusPendingCall *pending, void *userdata) { DBusMessage *r; pa_dbus_pending *p; @@ -210,8 +321,10 @@ finish: static void register_profile(pa_bluetooth_backend *b, const char *profile, const char *uuid) { DBusMessage *m; DBusMessageIter i, d; + dbus_bool_t autoconnect; + dbus_uint16_t version, chan; - pa_log_debug("Registering Profile %s", profile); + pa_log_debug("Registering Profile %s %s", profile, uuid); pa_assert_se(m = dbus_message_new_method_call(BLUEZ_SERVICE, "/org/bluez", BLUEZ_PROFILE_MANAGER_INTERFACE, "RegisterProfile")); @@ -220,6 +333,16 @@ static void register_profile(pa_bluetooth_backend *b, const char *profile, const dbus_message_iter_append_basic(&i, DBUS_TYPE_STRING, &uuid); dbus_message_iter_open_container(&i, DBUS_TYPE_ARRAY, DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING DBUS_TYPE_STRING_AS_STRING DBUS_TYPE_VARIANT_AS_STRING DBUS_DICT_ENTRY_END_CHAR_AS_STRING, &d); + if (pa_streq (uuid, PA_BLUETOOTH_UUID_HSP_HS)) { + /* In the headset role, the connection will only be initiated from the remote side */ + autoconnect = 0; + pa_dbus_append_basic_variant_dict_entry(&d, "AutoConnect", DBUS_TYPE_BOOLEAN, &autoconnect); + chan = HSP_HS_DEFAULT_CHANNEL; + pa_dbus_append_basic_variant_dict_entry(&d, "Channel", DBUS_TYPE_UINT16, &chan); + /* HSP version 1.2 */ + version = 0x0102; + pa_dbus_append_basic_variant_dict_entry(&d, "Version", DBUS_TYPE_UINT16, &version); + } dbus_message_iter_close_container(&i, &d); send_and_add_to_pending(b, m, register_profile_reply, pa_xstrdup(profile)); @@ -239,7 +362,8 @@ static void rfcomm_io_callback(pa_mainloop_api *io, pa_io_event *e, int fd, pa_i if (events & PA_IO_EVENT_INPUT) { char buf[512]; ssize_t len; - int gain; + int gain, dummy; + bool do_reply = false; len = pa_read(fd, buf, 511, NULL); if (len < 0) { @@ -249,22 +373,38 @@ static void rfcomm_io_callback(pa_mainloop_api *io, pa_io_event *e, int fd, pa_i buf[len] = 0; pa_log_debug("RFCOMM << %s", buf); - if (sscanf(buf, "AT+VGS=%d", &gain) == 1) { - t->speaker_gain = gain; - pa_hook_fire(pa_bluetooth_discovery_hook(t->device->discovery, PA_BLUETOOTH_HOOK_TRANSPORT_SPEAKER_GAIN_CHANGED), t); - } else if (sscanf(buf, "AT+VGM=%d", &gain) == 1) { - t->microphone_gain = gain; - pa_hook_fire(pa_bluetooth_discovery_hook(t->device->discovery, PA_BLUETOOTH_HOOK_TRANSPORT_MICROPHONE_GAIN_CHANGED), t); + /* There are only four HSP AT commands: + * AT+VGS=value: value between 0 and 15, sets the speaker gain in AG role or notifies the + * AG that the speaker gain has changed in HS role. + * AT+VGM=value: value between 0 and 15, sets the microphone gain in AG role or notifies + * the AG that the microphone gain has changed. + * AT+CKPD=200: headset button pressed + * RING: can safely be ignored because it does not expect a reply. */ + if (sscanf(buf, "AT+VGS=%d", &gain) == 1 || sscanf(buf, "\r\n+VGM=%d\r\n", &gain) == 1) { + t->speaker_gain = gain; + pa_hook_fire(pa_bluetooth_discovery_hook(t->device->discovery, PA_BLUETOOTH_HOOK_TRANSPORT_SPEAKER_GAIN_CHANGED), t); + do_reply = true; + + } else if (sscanf(buf, "AT+VGM=%d", &gain) == 1 || sscanf(buf, "\r\n+VGS=%d\r\n", &gain) == 1) { + t->microphone_gain = gain; + pa_hook_fire(pa_bluetooth_discovery_hook(t->device->discovery, PA_BLUETOOTH_HOOK_TRANSPORT_MICROPHONE_GAIN_CHANGED), t); + do_reply = true; + } else if (sscanf(buf, "AT+CKPD=%d", &dummy) == 1) { + do_reply = true; + } else { + do_reply = false; } - pa_log_debug("RFCOMM >> OK"); + if (do_reply) { + pa_log_debug("RFCOMM >> OK"); - len = write(fd, "\r\nOK\r\n", 6); + len = write(fd, "\r\nOK\r\n", 6); - /* we ignore any errors, it's not critical and real errors should - * be caught with the HANGUP and ERROR events handled above */ - if (len < 0) - pa_log_error("RFCOMM write error: %s", pa_cstrerror(errno)); + /* we ignore any errors, it's not critical and real errors should + * be caught with the HANGUP and ERROR events handled above */ + if (len < 0) + pa_log_error("RFCOMM write error: %s", pa_cstrerror(errno)); + } } return; @@ -275,18 +415,23 @@ fail: } static void transport_destroy(pa_bluetooth_transport *t) { - struct transport_rfcomm *trfc = t->userdata; + struct transport_data *trd = t->userdata; - trfc->mainloop->io_free(trfc->rfcomm_io); + if (trd->sco_io) { + trd->mainloop->io_free(trd->sco_io); + shutdown(trd->sco_fd, SHUT_RDWR); + close (trd->sco_fd); + } - shutdown(trfc->rfcomm_fd, SHUT_RDWR); - close (trfc->rfcomm_fd); + trd->mainloop->io_free(trd->rfcomm_io); + shutdown(trd->rfcomm_fd, SHUT_RDWR); + close (trd->rfcomm_fd); - pa_xfree(trfc); + pa_xfree(trd); } static void set_speaker_gain(pa_bluetooth_transport *t, uint16_t gain) { - struct transport_rfcomm *trfc = t->userdata; + struct transport_data *trd = t->userdata; char buf[512]; ssize_t len, written; @@ -295,17 +440,25 @@ static void set_speaker_gain(pa_bluetooth_transport *t, uint16_t gain) { t->speaker_gain = gain; - len = sprintf(buf, "\r\n+VGS=%d\r\n", gain); - pa_log_debug("RFCOMM >> +VGS=%d", gain); + /* If we are in the AG role, we send a command to the head set to change + * the speaker gain. In the HS role, source and sink are swapped, so + * in this case we notify the AG that the microphone gain has changed */ + if (t->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) { + len = sprintf(buf, "\r\n+VGS=%d\r\n", gain); + pa_log_debug("RFCOMM >> +VGS=%d", gain); + } else { + len = sprintf(buf, "\r\n+VGM=%d\r\n", gain); + pa_log_debug("RFCOMM >> +VGM=%d", gain); + } - written = write(trfc->rfcomm_fd, buf, len); + written = write(trd->rfcomm_fd, buf, len); if (written != len) pa_log_error("RFCOMM write error: %s", pa_cstrerror(errno)); } static void set_microphone_gain(pa_bluetooth_transport *t, uint16_t gain) { - struct transport_rfcomm *trfc = t->userdata; + struct transport_data *trd = t->userdata; char buf[512]; ssize_t len, written; @@ -314,10 +467,18 @@ static void set_microphone_gain(pa_bluetooth_transport *t, uint16_t gain) { t->microphone_gain = gain; - len = sprintf(buf, "\r\n+VGM=%d\r\n", gain); - pa_log_debug("RFCOMM >> +VGM=%d", gain); + /* If we are in the AG role, we send a command to the head set to change + * the microphone gain. In the HS role, source and sink are swapped, so + * in this case we notify the AG that the speaker gain has changed */ + if (t->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) { + len = sprintf(buf, "\r\n+VGM=%d\r\n", gain); + pa_log_debug("RFCOMM >> +VGM=%d", gain); + } else { + len = sprintf(buf, "\r\n+VGS=%d\r\n", gain); + pa_log_debug("RFCOMM >> +VGS=%d", gain); + } - written = write (trfc->rfcomm_fd, buf, len); + written = write (trd->rfcomm_fd, buf, len); if (written != len) pa_log_error("RFCOMM write error: %s", pa_cstrerror(errno)); @@ -333,7 +494,7 @@ static DBusMessage *profile_new_connection(DBusConnection *conn, DBusMessage *m, const char *sender, *path, PA_UNUSED *handler; DBusMessageIter arg_i; char *pathfd; - struct transport_rfcomm *trfc; + struct transport_data *trd; if (!dbus_message_iter_init(m, &arg_i) || !pa_streq(dbus_message_get_signature(m), "oha{sv}")) { pa_log_error("Invalid signature found in NewConnection"); @@ -341,7 +502,14 @@ static DBusMessage *profile_new_connection(DBusConnection *conn, DBusMessage *m, } handler = dbus_message_get_path(m); - pa_assert(pa_streq(handler, HSP_AG_PROFILE)); + if (pa_streq(handler, HSP_AG_PROFILE)) { + p = PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT; + } else if (pa_streq(handler, HSP_HS_PROFILE)) { + p = PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY; + } else { + pa_log_error("Invalid handler"); + goto fail; + } pa_assert(dbus_message_iter_get_arg_type(&arg_i) == DBUS_TYPE_OBJECT_PATH); dbus_message_iter_get_basic(&arg_i, &path); @@ -357,27 +525,29 @@ static DBusMessage *profile_new_connection(DBusConnection *conn, DBusMessage *m, pa_assert(dbus_message_iter_get_arg_type(&arg_i) == DBUS_TYPE_UNIX_FD); dbus_message_iter_get_basic(&arg_i, &fd); - pa_log_debug("dbus: NewConnection path=%s, fd=%d", path, fd); + pa_log_debug("dbus: NewConnection path=%s, fd=%d, profile %s", path, fd, + pa_bluetooth_profile_to_string(p)); sender = dbus_message_get_sender(m); - p = PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT; pathfd = pa_sprintf_malloc ("%s/fd%d", path, fd); t = pa_bluetooth_transport_new(d, sender, pathfd, p, NULL, 0); pa_xfree(pathfd); - t->acquire = bluez5_sco_acquire_cb; - t->release = bluez5_sco_release_cb; + t->acquire = sco_acquire_cb; + t->release = sco_release_cb; t->destroy = transport_destroy; t->set_speaker_gain = set_speaker_gain; t->set_microphone_gain = set_microphone_gain; - trfc = pa_xnew0(struct transport_rfcomm, 1); - trfc->rfcomm_fd = fd; - trfc->mainloop = b->core->mainloop; - trfc->rfcomm_io = trfc->mainloop->io_new(b->core->mainloop, fd, PA_IO_EVENT_INPUT|PA_IO_EVENT_HANGUP, + trd = pa_xnew0(struct transport_data, 1); + trd->rfcomm_fd = fd; + trd->mainloop = b->core->mainloop; + trd->rfcomm_io = trd->mainloop->io_new(b->core->mainloop, fd, PA_IO_EVENT_INPUT, rfcomm_io_callback, t); - t->userdata = trfc; + t->userdata = trd; + + sco_listen(t); pa_bluetooth_transport_put(t); @@ -413,7 +583,7 @@ static DBusHandlerResult profile_handler(DBusConnection *c, DBusMessage *m, void pa_log_debug("dbus: path=%s, interface=%s, member=%s", path, interface, member); - if (!pa_streq(path, HSP_AG_PROFILE)) + if (!pa_streq(path, HSP_AG_PROFILE) && !pa_streq(path, HSP_HS_PROFILE)) return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; if (dbus_message_is_method_call(m, "org.freedesktop.DBus.Introspectable", "Introspect")) { @@ -423,6 +593,8 @@ static DBusHandlerResult profile_handler(DBusConnection *c, DBusMessage *m, void pa_assert_se(dbus_message_append_args(r, DBUS_TYPE_STRING, &xml, DBUS_TYPE_INVALID)); } else if (dbus_message_is_method_call(m, BLUEZ_PROFILE_INTERFACE, "Release")) { + pa_log_debug("Release not handled"); + return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; } else if (dbus_message_is_method_call(m, BLUEZ_PROFILE_INTERFACE, "RequestDisconnection")) { r = profile_request_disconnection(c, m, userdata); } else if (dbus_message_is_method_call(m, BLUEZ_PROFILE_INTERFACE, "NewConnection")) @@ -452,6 +624,10 @@ static void profile_init(pa_bluetooth_backend *b, pa_bluetooth_profile_t profile object_name = HSP_AG_PROFILE; uuid = PA_BLUETOOTH_UUID_HSP_AG; break; + case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY: + object_name = HSP_HS_PROFILE; + uuid = PA_BLUETOOTH_UUID_HSP_HS; + break; default: pa_assert_not_reached(); break; @@ -468,6 +644,9 @@ static void profile_done(pa_bluetooth_backend *b, pa_bluetooth_profile_t profile case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT: dbus_connection_unregister_object_path(pa_dbus_connection_get(b->connection), HSP_AG_PROFILE); break; + case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY: + dbus_connection_unregister_object_path(pa_dbus_connection_get(b->connection), HSP_HS_PROFILE); + break; default: pa_assert_not_reached(); break; @@ -493,6 +672,7 @@ pa_bluetooth_backend *pa_bluetooth_native_backend_new(pa_core *c, pa_bluetooth_d backend->discovery = y; + profile_init(backend, PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY); profile_init(backend, PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT); return backend; @@ -503,6 +683,7 @@ void pa_bluetooth_native_backend_free(pa_bluetooth_backend *backend) { pa_dbus_free_pending_list(&backend->pending); + profile_done(backend, PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY); profile_done(backend, PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT); pa_dbus_connection_unref(backend->connection); diff --git a/src/modules/bluetooth/module-bluez5-device.c b/src/modules/bluetooth/module-bluez5-device.c index 7ec6cad..97fe8be 100644 --- a/src/modules/bluetooth/module-bluez5-device.c +++ b/src/modules/bluetooth/module-bluez5-device.c @@ -897,7 +897,6 @@ static int source_process_msg(pa_msgobject *o, int code, void *data, int64_t off return 0; } - } r = pa_source_process_msg(o, code, data, offset, chunk); @@ -918,7 +917,6 @@ static void source_set_volume_cb(pa_source *s) { pa_assert(u); pa_assert(u->source == s); - pa_assert(u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT); if (u->transport->set_microphone_gain == NULL) return; @@ -936,6 +934,13 @@ static void source_set_volume_cb(pa_source *s) { pa_cvolume_set(&s->real_volume, u->sample_spec.channels, volume); + /* Set soft volume when in headset role */ + if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) + pa_cvolume_set(&s->soft_volume, u->sample_spec.channels, volume); + + /* If we are in the AG role, we send a command to the head set to change + * the microphone gain. In the HS role, source and sink are swapped, so + * in this case we notify the AG that the speaker gain has changed */ u->transport->set_microphone_gain(u->transport, gain); } @@ -981,7 +986,7 @@ static int add_source(struct userdata *u) { u->source->userdata = u; u->source->parent.process_msg = source_process_msg; - if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) { + if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) { pa_source_set_set_volume_callback(u->source, source_set_volume_cb); u->source->n_volume_steps = 16; } @@ -1075,7 +1080,6 @@ static void sink_set_volume_cb(pa_sink *s) { pa_assert(u); pa_assert(u->sink == s); - pa_assert(u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT); if (u->transport->set_speaker_gain == NULL) return; @@ -1093,6 +1097,13 @@ static void sink_set_volume_cb(pa_sink *s) { pa_cvolume_set(&s->real_volume, u->sample_spec.channels, volume); + /* Set soft volume when in headset role */ + if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) + pa_cvolume_set(&s->soft_volume, u->sample_spec.channels, volume); + + /* If we are in the AG role, we send a command to the head set to change + * the speaker gain. In the HS role, source and sink are swapped, so + * in this case we notify the AG that the microphone gain has changed */ u->transport->set_speaker_gain(u->transport, gain); } @@ -1139,7 +1150,7 @@ static int add_sink(struct userdata *u) { u->sink->userdata = u; u->sink->parent.process_msg = sink_process_msg; - if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) { + if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) { pa_sink_set_set_volume_callback(u->sink, sink_set_volume_cb); u->sink->n_volume_steps = 16; } @@ -1272,7 +1283,7 @@ static int setup_transport(struct userdata *u) { /* check if profile has a transport */ t = u->device->transports[u->profile]; if (!t || t->state <= PA_BLUETOOTH_TRANSPORT_STATE_DISCONNECTED) { - pa_log_warn("Profile has no transport"); + pa_log_warn("Profile %s has no transport", pa_bluetooth_profile_to_string(u->profile)); return -1; } @@ -2105,7 +2116,10 @@ static pa_hook_result_t transport_speaker_gain_changed_cb(pa_bluetooth_discovery volume++; pa_cvolume_set(&v, u->sample_spec.channels, volume); - pa_sink_volume_changed(u->sink, &v); + if (t->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) + pa_sink_volume_changed(u->sink, &v); + else + pa_sink_set_volume(u->sink, &v, true, true); return PA_HOOK_OK; } @@ -2129,7 +2143,11 @@ static pa_hook_result_t transport_microphone_gain_changed_cb(pa_bluetooth_discov volume++; pa_cvolume_set(&v, u->sample_spec.channels, volume); - pa_source_volume_changed(u->source, &v); + + if (t->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) + pa_source_volume_changed(u->source, &v); + else + pa_source_set_volume(u->source, &v, true, true); return PA_HOOK_OK; } -- 2.10.1
