I confirmed with Wireshark that my USB sound card responds to GET_MIN with 0x0000 and GET_MAX with 0x6300 ... The audio device class definition [1] says the units are 1/256 dB (section 5.2.2.2.3: Mixer Control) ... So by my calculation, the min and max are 0 and 99 dB (0x6300 / 256 == 99) ... Why then does alsactl print: > range '0 - 99' > dbmin 0 > dbmax 38 (/usr/sbin/alsactl -f - store) From what I've read, this community knows the most about this, because it uses "dB data" [2] (though it's not really a PulseAudio issue) ... The "0 - 99" makes sense -- it lines up with my calculation ... Where does the 38 come from? (I expect it's obvious, I just haven't found the explanation?) Background: I just got a Bose SoundLink Revolve ... When I connect it with USB, the volume is silent from 0 to 99% and deafening at 100%. Directly adjusting the volume with alsamixer works properly: It increases smoothly from 0 to 100% -- changes that are reflected in the PulseAudio volume as fine adjustments in between 99 and 100% (64587 to 65536 PulseAudio volume). From what I've read there's a common problem where especially USB devices report the wrong dB data (don't follow the spec [3]) -- this has previously been handled by patching the USB audio driver [4] ... However I haven't figured out how my device deviates from the spec (0x0000 to 0x6300 or 0 to 99 dB seem plausible) -- my understanding is incomplete: I haven't figured out where the value 38 comes from ... [1] http://www.usb.org/developers/docs/devclass_docs/audio10.pdf [2] http://0pointer.de/blog/projects/decibel-data [3] https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/637066 [4] https://bugs.freedesktop.org/show_bug.cgi?id=93193#c14
