HDMI passthrough needs some love. What works with ALSA is plain broken with PulseAudio (no audio or random noise). Only the AC3 format seems to work, EAC3 is broken and HBR formats are not supported yet. Fix EAC3 issues where the AES non-audio bit is not set when opening the alsa-sink. The fix is to force a suspend/resume when an actual sink-input is connected. This is far from optimal since we suspend/resume twice (once for rate, once on entering passthrough) but the state machine is obviously quite racy. Add definitions for Dolby TrueHD and DTSHD. This needs additional work since ALSA will only enable the HBR passthrough mode with 8 channels and 192kHz. For now the ALSA sinks are only configured to support 2 channels for passthrough and we'd need to switch between 2 and 8 channels depending on the format. I don't quite understand how the profiles are managed and could use some help here. Pierre-Louis Bossart (2): pulsecore: sink: force suspend/resume on passthrough transitions alsa: add support for Dolby TrueHD and DTS-HD HBR passthrough src/pulse/format.c | 2 ++ src/pulse/format.h | 8 ++++++++ src/pulsecore/core-format.c | 6 +++++- src/pulsecore/sink.c | 24 ++++++++++++++++++++++++ src/pulsecore/sink.h | 1 + 5 files changed, 40 insertions(+), 1 deletion(-) -- 2.9.3
