>> > >> > I'd prefer a multi-purpose configuration with multiple >> sinks/sources: >> > >> > - Source 'DAW': aux1,aux2,aux3,aux4,aux5,aux6 >> > - Source 'Mic/Instrument': channel 0/1 = left/right >> > - Source 'Line': channel 2/3 = left/right >> > - Source 'S/PDIF' channel 4/5 = left/right >> > - Source 'TV' channel 4/5 = left/right >> (=S/PDIF) >> > >> > - Sink 'DAW': >> aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9,aux10 >> > - Sink 'Stereo1/Headphone A': channel 0/1 = left/right >> > - Sink 'Stereo2/Headphone B': channel 2/3 = left/right >> > - Sink 'Stereo3': channel 4/5 = left/right >> > - Sink 'Stereo4': channel 6/7 = left/right >> > - Sink 'Stereo5/SPDIF': channel 8/9 = left/right >> > - Sink 'Surround 7.1': front-left, front-right, >> rear-left, rear-right, center, lfe, side-left, side-right >> > - Sink 'Surround 7.1 -> 5.0': front-left, front-right, >> rear-left, rear-right, center, lfe -> front-left + front-right, >> side-left -> front-left + rear-left, side-right -> front-right + >> rear-right >> >> http://cgit.freedesktop.org/pulseaudio/pulseaudio/plain/src/modules/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf >> [1] >> >> >> Pulseaudio only support different device >> >> If your driver only have simgle device for 10 channel playback and 6 >> channel capture > > > ALSA provides the following hardware-devices/plugs: > > - sysdefault:CARD=FCA610 > - front:CARD=FCA610,DEV=0 > - surround21:CARD=FCA610,DEV=0 > - surround40:CARD=FCA610,DEV=0 > - surround41:CARD=FCA610,DEV=0 > - surround50:CARD=FCA610,DEV=0 > - surround51:CARD=FCA610,DEV=0 > - surround71:CARD=FCA610,DEV=0 > - iec958:CARD=FCA610,DEV=0 > - dmix:CARD=FCA610,DEV=0 > - dsnoop:CARD=FCA610,DEV=0 > - hw:CARD=FCA610,DEV=0 > - plughw:CARD=FCA610,DEV=0 Are you sure that those devices really work ? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20150626/d07912d5/attachment.html>
