On 27.08.2015 12:46, Eytan Naim wrote:
>
> Hi Georg,
>
> Thanks for your reply.
>
> I tried to do what you suggested:
>
> 1)I loaded module-null-sink
>
> 2)I loaded module-null-source
>
> 3)Both of them are defined as default.
>
> 4)I try record by â??parecord -rv --device=null.monitor /pulse/recâ??
>
> After answering the call, I get the following assert:
>
> ( 121.424| 0.012) E: [null-source][pulsecore/memblockq.c:286
> pa_memblockq_push()] Assertion 'uchunk->index + uchunk->length <=
> pa_memblock_get_length(uchunk->memblock)' failed at
> pulsecore/memblockq.c:286, function pa_memblockq_push(). Aborting.
>
> Larger log and is attached.
>
> â??pacmd listâ?? before answering is also attached. â?? seems good to me.
>
> Do you have any hint about what could be the cause?
>
Hi Eytan,
this looks like some problem with module-null-source. Unfortunately I
will be on
vacation for the next three weeks, so I cannot follow up. Maybe someone else
on the list has some idea, sorry.
Regards
Georg
> Thanks, Eytan.
>
> *From:*pulseaudio-discuss
> [mailto:pulseaudio-discuss-bounces at lists.freedesktop.org] *On Behalf
> Of *Georg Chini
> *Sent:* Tuesday, August 25, 2015 10:57 PM
> *To:* General PulseAudio Discussion
> *Subject:* Re: [pulseaudio-discuss] HFP bluetooth profile isn't working
>
> On 25.08.2015 13:58, Eytan Naim wrote:
>
> Hi,
>
> Iâ??m trying to enable HFP on pulseaudio 6.0 using oFono and bluez 5
> on a new embedded platform which doesnâ??t support alsa yet.
>
> In order to confirm that audio is â??playedâ?? I record it using
> parecord tool. â?? This method worked just fine when enabled a2dp a
> short time ago.
>
> After executing oFono & pulseaudio, a call is answered on the
> remote device- It is seemed that the relevant profile is chosen on
> pulseaudio, and parecord fails to record.
>
>
> What is the source you are recording from?
>
>
> When executing â??pacmd statâ?? it seems that
>
> Memory blocks allocated during the whole lifetime: 192, size: 699.9 KiB.
>
> Is constant while pulseaudio prints to terminal the following message
> along the call with relatively fixed intervals:
>
> ( 482.106| 0.013) D: [pulseaudio][modules/module-loopback.c:201
> adjust_rates()] Should buffer 96 bytes, buffered at minimum 128 bytes
>
> ( 482.118| 0.012) D: [pulseaudio][modules/module-loopback.c:226
> adjust_rates()] [bluez_sink.98_D6_F7_34_98_E8] Updated sampling rate
> to 8000 Hz.
>
> ( 482.132| 0.013) D: [pulseaudio][modules/module-loopback.c:197
> adjust_rates()] Loopback overall latency is 610.13 ms + 0.00 ms +
> 25.00 ms = 635.13 ms
>
> ( 482.146| 0.014) D: [pulseaudio][modules/module-loopback.c:201
> adjust_rates()] Should buffer 96 bytes, buffered at minimum 0 bytes
>
> ( 482.159| 0.012) D: [pulseaudio][modules/module-loopback.c:226
> adjust_rates()] [bluez_sink.98_D6_F7_34_98_E8] Updated sampling rate
> to 8000 Hz.
>
> ( 492.134| 9.975) D: [pulseaudio][modules/module-loopback.c:197
> adjust_rates()] Loopback overall latency is 610.13 ms + 8.00 ms + 0.00
> ms = 618.13 ms
>
> ( 492.148| 0.013) D: [pulseaudio][modules/module-loopback.c:201
> adjust_rates()] Should buffer 96 bytes, buffered at minimum 128 bytes
>
> ( 492.161| 0.012) D: [pulseaudio][modules/module-loopback.c:226
> adjust_rates()] [bluez_sink.98_D6_F7_34_98_E8] Updated sampling rate
> to 8000 Hz.
>
> ( 492.175| 0.013) D: [pulseaudio][modules/module-loopback.c:197
> adjust_rates()] Loopback overall latency is 610.13 ms + 0.00 ms +
> 25.00 ms = 635.13 ms
>
> ( 492.189| 0.014) D: [pulseaudio][modules/module-loopback.c:201
> adjust_rates()] Should buffer 96 bytes, buffered at minimum 0 bytes
>
> ( 492.201| 0.012) D: [pulseaudio][modules/module-loopback.c:226
> adjust_rates()] [bluez_sink.98_D6_F7_34_98_E8] Updated sampling rate
> to 8000 Hz.
>
> ( 502.176| 9.975) D: [pulseaudio][modules/module-loopback.c:197
> adjust_rates()] Loopback overall latency is 610.13 ms + 8.00 ms + 0.00
> ms = 618.13 ms
>
> ( 502.190| 0.013) D: [pulseaudio][modules/module-loopback.c:201
> adjust_rates()] Should buffer 96 bytes, buffered at minimum 128 bytes
>
> ( 502.202| 0.012) D: [pulseaudio][modules/module-loopback.c:226
> adjust_rates()] [bluez_sink.98_D6_F7_34_98_E8] Updated sampling rate
> to 8000 Hz.
>
> ( 502.216| 0.013) D: [pulseaudio][modules/module-loopback.c:197
> adjust_rates()] Loopback overall latency is 610.13 ms + 0.00 ms +
> 25.00 ms = 635.13 ms
>
>
>
>
> This looks fine, the messages are from two module-loopback which are
> loaded to play back
> the audio coming from the phone and to transmit audio from your
> computer to the phone.
> But this is also where it is getting strange because you have no other
> sound device.
> The only sink available to play back audio to is the phone and the
> only source to record from
> (except the phone source) is the monitor source of the phone sink (See
> below for explanation
> of the monitor source).
>
> To avoid that situation you should add a null sink and a null source
> to your system using
> module-null-sink and module-null-source and make them the default sink
> and source.
> Then audio coming from the phone will be played back to the null sink
> (and you can record
> from null.monitor) while silence coming from the null-source is sent
> to the phone.
>
>
> Please note:
>
> Iâ??m now familer with oFono at all â?? I simply run it as ofonod -d
>
> Pacmd list output is attached while call is still ongoing. â?? there are
> 2 sources loaded and one sink.
>
> Also, could someone explain why are there two source available? Nexus
> 4 and Nexus 4 monitor?
>
>
> The monitor source is created for each sink so that you have a source
> from where you
> can record what is played back to the sink.
>
>
> How can I confirm that the audio arrives at pulseaudio? By the log I
> would assume that the answer is positive, but according to â??pacmd
> statâ?? the value it seems not.
>
>
> In general it looks like your setup is working.
>
>
> Thanks for your help,
>
> Eytan.
>
>
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20150827/540ecac4/attachment.html>
