>> >> > >> > I tried a lot already. No success to get the sound working on my old maxdata laptop. >> > This is what I got: >> > >> > sl at max:~$ lspci -nnk | grep -iA2 audio >> > 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) >> > Subsystem: QUANTA Computer Inc Device [152d:0748] >> > Kernel driver in use: snd_hda_intel >> > >> > sl at max:~$ aplay -l >> > **** Liste der Hardware-Geräte (PLAYBACK) **** >> > Karte 0: Intel [HDA Intel], Gerät 6: Si3054 Modem [Si3054 Modem] >> > Sub-Geräte: 1/1 >> > Sub-Gerät #0: subdevice #0 >> > >> > sl at max:~$ aplay /usr/share/sounds/alsa/Front_Center.wav >> > Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono >> > >> > Please let me know if/what further information I should provide to give you a better understanding in what is wrong. >> > >> >> https://lists.fedoraproject.org/pipermail/test/2014-November/123662.html >> >> If bios did not setup pin default of alc880 codec, you need to find out the pin of hp and mic jacks by hdajacksensetest , speaker and internal mic need to find out by trial and err with hdajackretask >> >> _______________________________________________ >> pulseaudio-discuss mailing list >> pulseaudio-discuss at lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > > This is the output of hda-jack-sense-test. What do you recommend? > > root at max:~# hda-jack-sense-test > Pin 0x14 (Unknown Line Out): present = No > Pin 0x15 (Unknown Line Out): present = No > Pin 0x16 (Unknown Line Out): present = No > Pin 0x17 (Unknown Line Out): present = No > Pin 0x18 (Unknown Line Out): present = No > Pin 0x19 (Unknown Line Out): present = No > Pin 0x1a (Unknown Line Out): present = No > Pin 0x1b (Unknown Line Out): present = No > Pin 0x1c (Unknown Line Out): present = No > Pin 0x1d (Unknown Line Out): present = No > Pin 0x1e (Unknown Line Out): present = No > Pin 0x1f (Unknown Line Out): present = No > Post the output of alsa-info.sh You have to use hdajacksensetest -a Did you plug and unplug headphone or mic jack during test ? Since pin default of all pin complex are zero which is Line Out Any redundant pins must set to [N/A] alc880 only have models for desktop https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/Documentation/sound/alsa/HD-Audio-Models.txt https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/sound/pci/hda?qt=grep&q=alc880 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20150807/90802111/attachment.html>
