> > > Recognize the Dock headphone jack in the same way the normal & front > > > headphone jacks are detected. > > > > Hi Sjoerd, > > > > The reason "Headphone" and "Front Headphone" are both in the same path, > > is because they're often mixed, i e, the jack is called "Front > > Headphone" but the volume control is called only "Headphone". > > > > I'm not sure this is also the case for "Dock Headphone". In the case it > > isn't, "Dock Headphone" would need its own path rather than being > > integrated with the normal headphones path. > > > > Could you check this? > > I actually started it out as its own path, only to discover i couldn't > unmix them/mute them seperately :/.. So yes this is definitely the case > for at least my X220T + dock. As far as i could tell from the kernel HDA > sources it seems that all headphone outputs always tend to get setup as > mixed (although i could well be wrong here). http://git.kernel.org/cgit/linux/kernel/git/tiwai/hda-emu.git/tree/codecs/cx20561-lenovo-x200-tablet?id=HEAD Seem no hardware mute switch since mute=0 for amp out caps Should driver create fake mute at audio output node if headphone and dock headphone share volume control > > I'd actually would like them to not be seperately switchable (Such that > e.g. headphones on the laptop can get priority over headphones on the > dock) or rather, have the dock jack turn off when the laptops headphones > are plugged. But it looks like that needs some kernel patching to add > controls to change the HDA routing/pin setup to make that happen. > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20140901/25d807c7/attachment.html>
