On Fri, 2014-10-24 at 09:56 +0200, Wim Taymans wrote: > Parse the gain changed AT commands from the headset and fire 2 new > hooks as a result. The device will connect to those hooks and change the > source/sink volumes. > > When the source/sink volume changes, set the gain on the microphone or > speaker respectively. Make sure we do nothing if the transport can not > handle the gain changes. > --- I've landed this series now, and added one fix on top of this for AT command/response sending. I still see one bug, though -- setting the headset volume from PulseAudio does not seem to be working. I see the AT+VGS command being sent out, but no response on hcidump (not sure if the headset is supposed to respond). The volume of the output does not change according to the setting that we sent to the headset, and when I change the volume with the headset controls, the change is relative to the old value, not the value we sent from PA. I've tried this on a Jabra Clipper and a Jawbone Jambox, so I suspect it's not a headset-specific issue. Cheers, Arum
