http://pastebin.com/NnDvQ2kU >Do pactl can select the capture source? I don't know what specific command shold I use. > Which devices do you want to use? Those Multichannel's I had when I disabled pulse. Hmmm. Now I use surround 4.0 http://i.imgur.com/UZsnWqs.png but whatever is needed to accomplish it. 2014-11-23 17:11 GMT+01:00 Raymond Yau <superquad.vortex2 at gmail.com>: > > Need the hw params of surround40 similar to > > https://bugs.freedesktop.org/show_bug.cgi?id=84804#c17 > > > > > What I noticed is that even if I disable pulseaudio and play only with > kmix sliders there is the same situation. > >http://i.imgur.com/497ClHc.png > >http://i.imgur.com/ixClsH2.png > > Now I enebled it again. > > I guess the reason is that when I use rear line out (surround option) > and want to use TV (line in) there is no input devices in pulse audio > volume control - the tab shows that there are no active devices. > > > > Post the output of > > pactl list > > AFAIK, pulseaudio don't touch those playback volume/switches of sources in > capture source control (mic playback volume, line in playback volume,.... > > control.64 { > iface MIXER > name 'Capture Source' > value.0 Mic > value.1 Mic > comment { > access 'read write' > type ENUMERATED > count 2 > item.0 Mic > item.1 CD > item.2 Video > item.3 Aux > item.4 Line > item.5 Mix > item.6 'Mix Mono' > item.7 Phone > } > } > > > http://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/src/modules/alsa/mixer/paths > > pulseaudio only implement a few source in capture source control of ac97 > codec and the existing algorithm does not save and restore the selected > source of capture control of ac97 codec at shutdown or startup of > pulseaudio server > > This mean capture source is always the default value of record select > register of ac97 codec after codec reset > > Do pactl can select the capture source? > > > I found some information > >http://i.imgur.com/anqw0JX.png > >http://i.imgur.com/n9kogZl.png > > > > > > Pulseaudio use most of the devices defined in emu10k1.conf except rear and > clfe > (i.e. playback and capture device 0 ) > > > Which devices do you want to use? > > card 0: Live [SB Live! Value [CT4832]], device 2: emu10k1 efx > [Multichannel Capture/PT Playback] > Subdevices: 8/8 > Subdevice #0: subdevice #0 > Subdevice #1: subdevice #1 > Subdevice #2: subdevice #2 > Subdevice #3: subdevice #3 > Subdevice #4: subdevice #4 > Subdevice #5: subdevice #5 > Subdevice #6: subdevice #6 > Subdevice #7: subdevice #7 > > card 0: Live [SB Live! Value [CT4832]], device 3: emu10k1 [Multichannel > Playback] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > ARECORD > > **** List of CAPTURE Hardware Devices **** > > card 0: Live [SB Live! Value [CT4832]], device 1: emu10k1 mic [Mic Capture] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > card 0: Live [SB Live! Value [CT4832]], device 2: emu10k1 efx > [Multichannel Capture/PT Playback] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20141123/83da3422/attachment-0001.html>
