Signed-off-by: Alexander E. Patrakov <patrakov at gmail.com> --- src/modules/alsa/mixer/profile-sets/default.conf | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) Tanu Kaskinen wrote: > Somewhat related, I also wonder why the surround mappings (both 5.1 and > 7.1) are only in extra-hdmi.conf. My understanding is that the point of > extra-hdmi.conf is just to offer the additional mappings for the > subdevices 1-3, so the non-extra surround profiles should be copied to > all other profile-set files too. Valid point, let's add the surround profiles to default.conf > And still one related note: it seems that 5.1 mappings are missing for > the "extra" subdevices. Hm. Mapping hdmi-surround-extra1 does exist, and has the correct channel-map. What exactly is missing? DTS-over-HDMI patch will be sent out when it becomes clear what to base it upon (to avoid conflicts with e.g. this patch). diff --git a/src/modules/alsa/mixer/profile-sets/default.conf b/src/modules/alsa/mixer/profile-sets/default.conf index 83cb425..25d56ef 100644 --- a/src/modules/alsa/mixer/profile-sets/default.conf +++ b/src/modules/alsa/mixer/profile-sets/default.conf @@ -199,6 +199,22 @@ priority = 4 direction = output paths-output = hdmi-output-0 +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 3 +direction = output + +[Mapping hdmi-surround-71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 2 +direction = output + ; An example for defining multiple-sink profiles #[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] #description = Foobar -- 2.0.0
