W dniu 27.05.2013 05:36, Arun Raghavan pisze: > On Thu, 2013-05-23 at 20:26 +0200, Julian Sikorski wrote: >> W dniu 23.05.2013 20:10, Julian Sikorski pisze: >>> W dniu 23.05.2013 19:32, Arun Raghavan pisze: >>>> On Thu, 2013-05-23 at 19:22 +0200, Julian Sikorski wrote: >>>>> Hi, >>>>> >>>>> this was annoying me long enough that I have decided to investigate. >>>>> Basically, I am using skype-4.2 and pulseaudio-2.1 on fedora 18 x86_64. >>>>> Whenever skype produces a sound event (incoming message bleep, logging >>>>> in sound), buzzing noise will occur. This is especially prominent when >>>>> playing a song in the background. I have looked at the log and the error >>>>> message seems to be this: >>>>> >>>>> D: [alsa-sink] memblock.c: Pool full >>>>> D: [alsa-sink] memblock.c: Pool full >>>>> D: [alsa-sink] memblock.c: Pool full >>>>> >>>>> I have attached a full log. I know that PA 2.1 is really old now, but >>>>> Fedora seems to be having hard time aligning with PA releases these days. >>>> >>>> This happens because PulseAudio didn't handle low latency requests well >>>> enough. This has been fixed recently, and will be available in the next >>>> release (or in one of the 3.99.x prereleases if you can get a package >>>> for it). >>>> >>>> -- Arun >>>> >>> That's great to hear! Hopefully 4.0 will make it to Fedora 19, otherwise >>> it will be in Fedora 20 which is slated for a January release. It's >>> funny to think that Fedora was once the distro advocating pulseaudio. >>> >>> Julian >>> >> I just talked to the Fedora PA maintainer and unfortunately F-19 is too >> far past freeze to ship PA 4.0. >> Is the fix you mention possible to backport to 3.0 (which is what F-19 >> is going to be shipping)? > > This is the one you'll want: > > http://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/?id=5f326b705d8f7f0c14e7e0c7d7c2751f3a5ebe43 > > Cheers, > Arun > Hi, I have ported the patch over back to 2.1, but now it is even worse - Skype does not make any sound at all, and suppresses other system sounds as well: I: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)" D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4 D: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26 I: [pulseaudio] protocol-native.c: Got credentials: uid=500 gid=500 success=1 D: [pulseaudio] protocol-native.c: SHM possible: yes D: [pulseaudio] protocol-native.c: Negotiated SHM: yes D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for skype D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/skype.desktop. I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event. D: [pulseaudio] module-intended-roles.c: Not setting device for stream Event Sound, because already set. I: [pulseaudio] sink-input.c: Trying to change sample rate I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING I: [pulseaudio] sink-input.c: Resampling enabled to 44100 Hz I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:event. I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:event. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy. D: [pulseaudio] resampler.c: Channel matrix: D: [pulseaudio] resampler.c: I00 D: [pulseaudio] resampler.c: +------ D: [pulseaudio] resampler.c: O00 | 1,000 D: [pulseaudio] resampler.c: O01 | 1,000 I: [pulseaudio] remap_sse.c: Using SSE mono to stereo remapping I: [pulseaudio] resampler.c: Using resampler 'speex-float-3' I: [pulseaudio] resampler.c: Using float32le as working format. I: [pulseaudio] resampler.c: Choosing speex quality setting 3. D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] sink-input.c: Created input 0 "Event Sound" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map mono I: [pulseaudio] sink-input.c: window.icon_name = "skype" I: [pulseaudio] sink-input.c: application.icon_name = "skype" I: [pulseaudio] sink-input.c: media.role = "event" I: [pulseaudio] sink-input.c: media.name = "Event Sound" I: [pulseaudio] sink-input.c: application.name = "Skype" I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] sink-input.c: native-protocol.version = "26" I: [pulseaudio] sink-input.c: application.process.id = "28077" I: [pulseaudio] sink-input.c: application.process.user = "julas" I: [pulseaudio] sink-input.c: application.process.host = "snowball2" I: [pulseaudio] sink-input.c: application.process.binary = "skype" I: [pulseaudio] sink-input.c: application.language = "pl_PL.utf8" I: [pulseaudio] sink-input.c: window.x11.display = ":0" I: [pulseaudio] sink-input.c: application.process.machine_id = "98d51596bca05b5c8d3ab7dd0000000d" I: [pulseaudio] sink-input.c: application.process.session_id = "98d51596bca05b5c8d3ab7dd0000000d-1369684384.802085-1185910046" I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event" I: [pulseaudio] protocol-native.c: Requested tlength=10,00 ms, minreq=2,50 ms D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency. D: [pulseaudio] protocol-native.c: Requested latency=2,50 ms, Received latency=2,50 ms D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=720, base=2, prebuf=482, minreq=240 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=720, base=2, prebuf=482, minreq=240 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 10,00 ms = 2,50 ms + 2*2,50 ms + 2,50 ms D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [alsa-sink] alsa-sink.c: Requesting rewind due to latency change. D: [alsa-sink] alsa-sink.c: Requested volume: 0: 76% 1: 76% D: [alsa-sink] alsa-sink.c: in dB: 0: -7,05 dB 1: -7,05 dB D: [alsa-sink] alsa-sink.c: Got hardware volume: 0: 76% 1: 76% D: [alsa-sink] alsa-sink.c: in dB: 0: -7,00 dB 1: -7,00 dB D: [alsa-sink] alsa-sink.c: Calculated software volume: 0: 100% 1: 100% (accurate-enough=yes) D: [alsa-sink] alsa-sink.c: in dB: 0: -0,05 dB 1: -0,05 dB D: [alsa-sink] sink.c: Volume going down to 49997 at 39279515168 D: [alsa-sink] ratelimit.c: 18 events suppressed D: [alsa-sink] sink.c: Next volume change in 11288 usec D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes. D: [alsa-sink] alsa-sink.c: Limited to 3176 bytes. D: [alsa-sink] alsa-sink.c: before: 794 D: [alsa-sink] alsa-sink.c: after: 794 D: [alsa-sink] alsa-sink.c: Rewound 3176 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1225 D: [alsa-sink] sink.c: Volume change to 49997 at 39279497171 was written 6775 usec late D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0 D: [alsa-sink] sink-input.c: Have to rewind 3176 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING D: [alsa-sink] sink-input.c: Requesting rewind due to uncorking D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes. D: [alsa-sink] alsa-sink.c: Limited to 120 bytes. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy. D: [alsa-sink] alsa-sink.c: before: 30 D: [alsa-sink] alsa-sink.c: after: 30 D: [alsa-sink] alsa-sink.c: Rewound 120 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1422 D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes. D: [alsa-sink] alsa-sink.c: Limited to 56 bytes. D: [alsa-sink] alsa-sink.c: before: 14 D: [alsa-sink] alsa-sink.c: after: 14 D: [alsa-sink] alsa-sink.c: Rewound 56 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1410 D: [alsa-sink] sink-input.c: Have to rewind 56 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-source] memblock.c: Pool full D: [alsa-source] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 1,00 ms D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [alsa-sink] protocol-native.c: Underrun on 'Event Sound', 0 bytes in queue. D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 52 bytes. D: [alsa-sink] alsa-sink.c: Limited to 52 bytes. D: [alsa-sink] alsa-sink.c: before: 13 D: [alsa-sink] alsa-sink.c: after: 13 D: [alsa-sink] alsa-sink.c: Rewound 52 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1181 D: [alsa-sink] sink-input.c: Have to rewind 52 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] ratelimit.c: 9756 events suppressed D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full I: [pulseaudio] source-output.c: Trying to change sample rate I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz I: [pulseaudio] source-output.c: Resampling enabled to 44100 Hz I: [pulseaudio] module-stream-restore.c: Restoring volume for source output source-output-by-media-role:phone. I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-media-role:phone. D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes busy. D: [pulseaudio] resampler.c: Channel matrix: D: [pulseaudio] resampler.c: I00 I01 D: [pulseaudio] resampler.c: +------------ D: [pulseaudio] resampler.c: O00 | 1,000 1,000 I: [pulseaudio] remap.c: Using generic matrix remapping I: [pulseaudio] resampler.c: Using resampler 'speex-float-3' I: [pulseaudio] resampler.c: Using float32le as working format. I: [pulseaudio] resampler.c: Choosing speex quality setting 3. D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] source-output.c: Created output 3 "Input" on alsa_input.pci-0000_00_1b.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map mono I: [pulseaudio] source-output.c: window.icon_name = "skype" I: [pulseaudio] source-output.c: application.icon_name = "skype" I: [pulseaudio] source-output.c: media.role = "phone" I: [pulseaudio] source-output.c: media.name = "Input" I: [pulseaudio] source-output.c: application.name = "Skype" I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] source-output.c: native-protocol.version = "26" I: [pulseaudio] source-output.c: application.process.id = "28077" I: [pulseaudio] source-output.c: application.process.user = "julas" I: [pulseaudio] source-output.c: application.process.host = "snowball2" I: [pulseaudio] source-output.c: application.process.binary = "skype" I: [pulseaudio] source-output.c: application.language = "pl_PL.utf8" I: [pulseaudio] source-output.c: window.x11.display = ":0" I: [pulseaudio] source-output.c: application.process.machine_id = "98d51596bca05b5c8d3ab7dd0000000d" I: [pulseaudio] source-output.c: application.process.session_id = "98d51596bca05b5c8d3ab7dd0000000d-1369684384.802085-1185910046" I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-media-role:phone" D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=2, prebuf=1, minreq=0 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=2, prebuf=2, minreq=2 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 10,00 ms = 5,00 ms + 5,00 ms D: [alsa-source] alsa-source.c: latency set to 5,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=351920 D: [alsa-source] alsa-source.c: setting avail_min=111 D: [alsa-source] alsa-source.c: latency set to 5,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=351920 D: [alsa-source] alsa-source.c: setting avail_min=111 D: [alsa-source] alsa-source.c: Requested volume: 0: 0% 1: 0% D: [alsa-source] alsa-source.c: in dB: 0: -inf dB 1: -inf dB D: [alsa-source] alsa-source.c: Got hardware volume: 0: 5% 1: 5% D: [alsa-source] alsa-source.c: in dB: 0: -76,00 dB 1: -76,00 dB D: [alsa-source] alsa-source.c: Calculated software volume: 0: 0% 1: 0% (accurate-enough=no) D: [alsa-source] alsa-source.c: in dB: 0: -inf dB 1: -inf dB D: [alsa-source] source.c: Volume not changing D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/record_stream3 D: [alsa-sink] protocol-native.c: Underrun on 'Event Sound', 0 bytes in queue. D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes busy. D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 500 bytes. D: [alsa-sink] alsa-sink.c: Mhmm, actually there is nothing to rewind. I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 2,00 ms D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [pulseaudio] protocol-native.c: Client skype changes volume of source alsa_input.pci-0000_00_1b.0.analog-stereo. D: [alsa-source] alsa-source.c: Requested volume: 0: 0% 1: 0% D: [alsa-source] alsa-source.c: in dB: 0: -inf dB 1: -inf dB D: [alsa-source] alsa-source.c: Got hardware volume: 0: 5% 1: 5% D: [alsa-source] alsa-source.c: in dB: 0: -76,00 dB 1: -76,00 dB D: [alsa-source] alsa-source.c: Calculated software volume: 0: 0% 1: 0% (accurate-enough=no) D: [alsa-source] alsa-source.c: in dB: 0: -inf dB 1: -inf dB D: [alsa-source] source.c: Volume not changing D: [alsa-sink] protocol-native.c: Underrun on 'Event Sound', 0 bytes in queue. D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 92 bytes. D: [alsa-sink] alsa-sink.c: Limited to 88 bytes. D: [alsa-sink] alsa-sink.c: before: 22 D: [alsa-sink] alsa-sink.c: after: 22 D: [alsa-sink] alsa-sink.c: Rewound 88 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 877 D: [alsa-sink] sink-input.c: Have to rewind 88 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-source] alsa-source.c: latency set to 20,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=349272 D: [alsa-source] alsa-source.c: setting avail_min=707 D: [alsa-source] alsa-source.c: Requested volume: 0: 0% 1: 0% D: [alsa-source] alsa-source.c: in dB: 0: -inf dB 1: -inf dB D: [alsa-source] alsa-source.c: Got hardware volume: 0: 5% 1: 5% D: [alsa-source] alsa-source.c: in dB: 0: -76,00 dB 1: -76,00 dB D: [alsa-source] alsa-source.c: Calculated software volume: 0: 0% 1: 0% (accurate-enough=no) D: [alsa-source] alsa-source.c: in dB: 0: -inf dB 1: -inf dB D: [alsa-source] source.c: Volume not changing D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/record_stream3 I: [pulseaudio] source-output.c: Freeing output 3 "Input" I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event. D: [pulseaudio] module-intended-roles.c: Not setting device for stream Event Sound, because already set. I: [pulseaudio] sink-input.c: Trying to change sample rate I: [pulseaudio] sink.c: Cannot update rate, SINK_IS_RUNNING, will keep using 44100 Hz I: [pulseaudio] sink-input.c: Resampling enabled to 44100 Hz I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:event. I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:event. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy. D: [pulseaudio] resampler.c: Channel matrix: D: [pulseaudio] resampler.c: I00 D: [pulseaudio] resampler.c: +------ D: [pulseaudio] resampler.c: O00 | 1,000 D: [pulseaudio] resampler.c: O01 | 1,000 I: [pulseaudio] remap_sse.c: Using SSE mono to stereo remapping I: [pulseaudio] resampler.c: Using resampler 'speex-float-3' I: [pulseaudio] resampler.c: Using float32le as working format. I: [pulseaudio] resampler.c: Choosing speex quality setting 3. D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] sink-input.c: Created input 1 "Event Sound" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map mono I: [pulseaudio] sink-input.c: window.icon_name = "skype" I: [pulseaudio] sink-input.c: application.icon_name = "skype" I: [pulseaudio] sink-input.c: media.role = "event" I: [pulseaudio] sink-input.c: media.name = "Event Sound" I: [pulseaudio] sink-input.c: application.name = "Skype" I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] sink-input.c: native-protocol.version = "26" I: [pulseaudio] sink-input.c: application.process.id = "28077" I: [pulseaudio] sink-input.c: application.process.user = "julas" I: [pulseaudio] sink-input.c: application.process.host = "snowball2" I: [pulseaudio] sink-input.c: application.process.binary = "skype" I: [pulseaudio] sink-input.c: application.language = "pl_PL.utf8" I: [pulseaudio] sink-input.c: window.x11.display = ":0" I: [pulseaudio] sink-input.c: application.process.machine_id = "98d51596bca05b5c8d3ab7dd0000000d" I: [pulseaudio] sink-input.c: application.process.session_id = "98d51596bca05b5c8d3ab7dd0000000d-1369684384.802085-1185910046" I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event" I: [pulseaudio] protocol-native.c: Requested tlength=10,00 ms, minreq=2,50 ms D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency. D: [pulseaudio] protocol-native.c: Requested latency=2,50 ms, Received latency=2,50 ms D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=720, base=2, prebuf=482, minreq=240 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=720, base=2, prebuf=482, minreq=240 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 10,00 ms = 2,50 ms + 2*2,50 ms + 2,50 ms D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [alsa-sink] alsa-sink.c: Requested volume: 0: 76% 1: 76% D: [alsa-sink] alsa-sink.c: in dB: 0: -7,05 dB 1: -7,05 dB D: [alsa-sink] alsa-sink.c: Got hardware volume: 0: 76% 1: 76% D: [alsa-sink] alsa-sink.c: in dB: 0: -7,00 dB 1: -7,00 dB D: [alsa-sink] alsa-sink.c: Calculated software volume: 0: 100% 1: 100% (accurate-enough=yes) D: [alsa-sink] alsa-sink.c: in dB: 0: -0,05 dB 1: -0,05 dB D: [alsa-sink] sink.c: Volume not changing D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1 D: [alsa-sink] protocol-native.c: Underrun on 'Event Sound', 0 bytes in queue. D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 216 bytes. D: [alsa-sink] alsa-sink.c: Limited to 184 bytes. D: [alsa-sink] alsa-sink.c: before: 46 D: [alsa-sink] alsa-sink.c: after: 46 D: [alsa-sink] alsa-sink.c: Rewound 184 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1348 D: [alsa-sink] sink-input.c: Have to rewind 184 bytes on render memblockq. D: [alsa-sink] sink-input.c: Have to rewind 184 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] sink-input.c: Requesting rewind due to uncorking D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy. D: [alsa-sink] alsa-sink.c: Limited to 120 bytes. D: [alsa-sink] alsa-sink.c: before: 30 D: [alsa-sink] alsa-sink.c: after: 30 D: [alsa-sink] alsa-sink.c: Rewound 120 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1376 D: [alsa-sink] sink-input.c: Have to rewind 120 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes. D: [alsa-sink] alsa-sink.c: Limited to 88 bytes. D: [alsa-sink] alsa-sink.c: before: 22 D: [alsa-sink] alsa-sink.c: after: 22 D: [alsa-sink] alsa-sink.c: Rewound 88 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1265 D: [alsa-sink] sink-input.c: Have to rewind 88 bytes on render memblockq. D: [alsa-sink] sink-input.c: Have to rewind 88 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] sink-input.c: Requesting rewind due to corking D: [alsa-sink] alsa-sink.c: Requested to rewind 216 bytes. D: [alsa-sink] alsa-sink.c: Limited to 152 bytes. D: [alsa-sink] alsa-sink.c: before: 38 D: [alsa-sink] alsa-sink.c: after: 38 D: [alsa-sink] alsa-sink.c: Rewound 152 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1290 D: [alsa-sink] sink-input.c: Have to rewind 152 bytes on render memblockq. D: [alsa-sink] sink-input.c: Have to rewind 152 bytes on render memblockq. D: [alsa-sink] sink-input.c: Have to rewind 84 bytes on implementor. D: [alsa-sink] source.c: Processing rewind... D: [alsa-sink] alsa-sink.c: Latency set to 2,50ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352360 D: [alsa-sink] alsa-sink.c: setting avail_min=88146 D: [alsa-sink] alsa-sink.c: Requested volume: 0: 76% 1: 76% D: [alsa-sink] alsa-sink.c: in dB: 0: -7,05 dB 1: -7,05 dB D: [alsa-sink] alsa-sink.c: Got hardware volume: 0: 76% 1: 76% D: [alsa-sink] alsa-sink.c: in dB: 0: -7,00 dB 1: -7,00 dB D: [alsa-sink] alsa-sink.c: Calculated software volume: 0: 100% 1: 100% (accurate-enough=yes) D: [alsa-sink] alsa-sink.c: in dB: 0: -0,05 dB 1: -0,05 dB D: [alsa-sink] sink.c: Volume not changing D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes. D: [alsa-sink] alsa-sink.c: Limited to 88 bytes. D: [alsa-sink] alsa-sink.c: before: 22 D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1 D: [alsa-sink] alsa-sink.c: after: 22 I: [pulseaudio] sink-input.c: Freeing input 1 "Event Sound" D: [alsa-sink] alsa-sink.c: Rewound 88 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 1167 D: [alsa-sink] sink-input.c: Have to rewind 88 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 4,00 ms D: [alsa-sink] alsa-sink.c: Latency set to 4,00ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352096 D: [alsa-sink] alsa-sink.c: setting avail_min=88113 D: [alsa-sink] protocol-native.c: max_request changed, trying to update from 720 to 864. D: [alsa-sink] protocol-native.c: Notifying client about increased tlength D: [alsa-sink] alsa-sink.c: Latency set to 4,00ms D: [alsa-sink] alsa-sink.c: hwbuf_unused=352096 D: [alsa-sink] alsa-sink.c: setting avail_min=88113 D: [alsa-sink] protocol-native.c: Underrun on 'Event Sound', 0 bytes in queue. D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink] alsa-sink.c: Requested to rewind 96 bytes. D: [alsa-sink] alsa-sink.c: Limited to 96 bytes. D: [alsa-sink] alsa-sink.c: before: 24 D: [alsa-sink] alsa-sink.c: after: 24 D: [alsa-sink] alsa-sink.c: Rewound 96 bytes. D: [alsa-sink] sink.c: Processing rewind... D: [alsa-sink] sink.c: latency = 2550 D: [alsa-sink] sink-input.c: Have to rewind 96 bytes on render memblockq. D: [alsa-sink] source.c: Processing rewind... D: [alsa-source] ratelimit.c: 12173 events suppressed D: [alsa-source] memblock.c: Pool full D: [alsa-source] memblock.c: Pool full D: [alsa-source] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] ratelimit.c: 5445 events suppressed D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full D: [pulseaudio] memblock.c: Pool full D: [alsa-sink] memblock.c: Pool full Best regards, Julian
