Pulse Audio 4.0 gets killed by 300 Hz tone...never recovers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2013-06-24 at 11:36 -0400, Robert Krakora wrote:
> Basically, the 300Hz tone "motor boats" when played over SIP via Asterisk.
> Every tone that previously played well over SIP via Asterisk then also
> "motor boats".

(Please don't top-post.)

If you record from the alsa sink while this motor-boating is happening,
is the audio in the recorded file fine? You can record with for example
this command:

     parecord --device=NAME_OF_THE_MONITOR_SOURCE > ~/tmp/test.wav

Replace NAME_OF_THE_MONITOR_SOURCE with the name of the monitor source.
You can list the available sources with "pactl list sources short",
hopefully you're able to figure out which of the sources is the correct
one (it's one of those that end with ".monitor").

-- 
Tanu



[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux