> > -----Original Message----- > > From: Tanu Kaskinen [mailto:tanu.kaskinen at linux.intel.com] > > Sent: Monday, 15 July, 2013 21:34 > > To: John Frankish > > Cc: pulseaudio-discuss at lists.freedesktop.org > > Subject: Re: [pulseaudio-discuss] Problems with bluez-4.101 and pulseaudio-4.0 > > > > On Mon, 2013-07-15 at 16:56 +0000, John Frankish wrote: > > I've compiled pulseaudio-4.0 and pavucontrol-2.0 on a linux-3.8.10 system and things work fine in general. > > > > Using pavucontrol I can switch seamlessly between my laptop speakers and a usb headset, but for some reason > > I cannot connect to bluetooth devices. > > > > If I understand correctly, I need the following in audio.conf: > > > > Enable=Source,Sink,Headset,Control,Media,Gateway > > Disable=Socket > > > > I paired using simple-agent, then ran pulseaudio -vv, but all I get is this: > > > > D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPAG on adapter /org/bluez/13639/hci0. > > D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPHS on adapter /org/bluez/13639/hci0. > > D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSource on adapter /org/bluez/13639/hci0. > > D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSink on adapter /org/bluez/13639/hci0. > > D: [pulseaudio] bluetooth-util.c: Device /org/bluez/13639/hci0/dev_00_21_3C_5B_E7_23 interface org.bluez. > > Headset property 'State' changed to value 'disconnected' > > D: [pulseaudio] bluetooth-util.c: Device /org/bluez/13639/hci0/dev_00_21_3C_5B_E7_23 interface org.bluez. > > AudioSink property 'State' changed to value 'disconnected' > > D: [pulseaudio] bluetooth-util.c: Device /org/bluez/13639/hci0/dev_00_21_3C_5B_E7_23 interface org.bluez. > > Headset property 'State' changed to value 'disconnected' > > D: [pulseaudio] bluetooth-util.c: Device /org/bluez/13639/hci0/dev_00_21_3C_5B_E7_23 interface org.bluez. > > Audio property 'State' changed to value 'disconnected' > > > > I saw somewhere that bluez-5 needs simple-endpoint to be run - is this the >> case with bluez-4.101 and, if so, what syntax is required? > > I don't know what simple-endpoint is, but I would guess that it's not needed > with bluez 4. > > I think the problem is that you don't connect any of the audio profiles of the > bluetooth device. Just pairing is not enough. I don't know how to connect the > profiles from command line, so I can't give exact instructions, but with e.g. > Gnome 3 the profiles are connected when I click on the bluetooth applet, > click on the device name, and then toggle the "Connection" on/off switch. > > -- > Tanu Thanks for the hint I tried with blueman-1.23: A Bluetooth headset will connect using a "headset" profile, but not as an "A2DP sink" Bluetooth headphones will not connect as an "A2DP sink" I suspect the issue is audio.conf, but without knowing the command line syntax to connect the audio profiles, it's a little difficult to troubleshoot. John
