On Mon, Dec 9, 2013 at 9:39 PM, Raymond Yau <superquad.vortex2 at gmail.com>wrote: > > > >> >>> > ATI/AMD does not internally use ELD but analogous custom stuff. But as >>> > noted, the HDA driver on this kernel does not support reading it, it is >>> > a 3.12+ feature (though note that writing the info is disabled in 3.12 >>> > radeon video driver on some cards). >>> >>> A typo here, AMD stuff is a 3.13+ feature. >>> >>> New logs. >> I hope this time I got it right: >> >> >> zcat /proc/config.gz : >> CONFIG_SND_DEBUG=y >> CONFIG_SND_DEBUG_VERBOSE=y >> CONFIG_SND_PCM_XRUN_DEBUG=y >> CONFIG_SND_DYNAMIC_MINORS=y >> >> > Did you pass the output of alsa-info.sh and eld to the alsa-devel mailing > list ? > > Attached > Codec: ATI R6xx HDMI > Address: 0 > AFG Function Id: 0x1 (unsol 0) > Vendor Id: 0x1002aa01 > Subsystem Id: 0x00aa0100 > Revision Id: 0x100300 > > seem that your codec may get Audio-Video Association Port ID and Sink > Information for your DENON-AVAMP > > Do pulseaudio show four available HDMI ports ? > > Correct > pactl list > Attached > > Do pulseaudio select the first HDMI as active port the default sink ? > > I am not sure. If we take "aplay -l"'s order no, as the first one is the only good one. If we take "aplay -L"s order, I don't know, only the last one works. > pactl stat > Attached -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20131210/bb8d4e3b/attachment-0001.html> -------------- next part -------------- monitor_present 1 eld_valid 1 monitor_name connection_type HDMI eld_version [0x2] CEA-861D or below edid_version [0x0] no CEA EDID Timing Extension block present manufacture_id 0x0 product_id 0x0 port_id 0x0 support_hdcp 0 support_ai 0 audio_sync_delay 0 speakers [0x5f] FL/FR LFE FC RL/RR RC RLC/RRC sad_count 6 sad0_coding_type [0x1] LPCM sad0_channels 8 sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad0_bits [0xe0000] 16 20 24 sad1_coding_type [0x2] AC-3 sad1_channels 6 sad1_rates [0xe0] 32000 44100 48000 sad1_max_bitrate 640000 sad2_coding_type [0x7] DTS sad2_channels 6 sad2_rates [0x6c0] 44100 48000 88200 96000 sad2_max_bitrate 1536000 sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus) sad3_channels 8 sad3_rates [0xc0] 44100 48000 sad4_coding_type [0xb] DTS-HD sad4_channels 8 sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000 sad5_coding_type [0xc] MLP (Dolby TrueHD) sad5_channels 8 sad5_rates [0x1ec0] 44100 48000 88200 96000 176400 192000 -------------- next part -------------- A non-text attachment was scrubbed... Name: alsa-info.txt.LmgaTPfC5N Type: application/octet-stream Size: 71325 bytes Desc: not available URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20131210/bb8d4e3b/attachment-0001.obj> -------------- next part -------------- Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0-271-g09e8-dirty" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "4.0-271-g09e8-dirty" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0-271-g09e8-dirty" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0-271-g09e8-dirty" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: Module #5 Name: module-udev-detect Argument: tsched=0 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0-271-g09e8-dirty" Module #6 Name: module-alsa-card Argument: device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Usage counter: 0 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0-271-g09e8-dirty" Module #7 Name: module-jackdbus-detect Argument: channels=2 Usage counter: n/a Properties: module.author = "David Henningsson" module.description = "Adds JACK sink/source ports when JACK is started" module.version = "4.0-271-g09e8-dirty" Module #8 Name: module-bluetooth-policy Argument: Usage counter: n/a Properties: module.author = "Fr?d?ric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "4.0-271-g09e8-dirty" Module #9 Name: module-bluetooth-discover Argument: Usage counter: n/a Properties: module.author = "Jo?o Paulo Rechi Vita" module.description = "Detect available Bluetooth daemon and load the corresponding discovery module" module.version = "4.0-271-g09e8-dirty" Module #10 Name: module-bluez5-discover Argument: Usage counter: n/a Properties: module.author = "Jo?o Paulo Rechi Vita" module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers" module.version = "4.0-271-g09e8-dirty" Module #11 Name: module-bluez4-discover Argument: Usage counter: n/a Properties: module.author = "Jo?o Paulo Rechi Vita" module.description = "Detect available BlueZ 4 Bluetooth audio devices and load BlueZ 4 Bluetooth audio drivers" module.version = "4.0-271-g09e8-dirty" Module #12 Name: module-esound-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "ESOUND protocol (UNIX sockets)" module.version = "4.0-271-g09e8-dirty" Module #13 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0-271-g09e8-dirty" Module #14 Name: module-gconf Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "GConf Adapter" module.version = "4.0-271-g09e8-dirty" Module #15 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0-271-g09e8-dirty" Module #16 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" module.version = "4.0-271-g09e8-dirty" Module #17 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "4.0-271-g09e8-dirty" Module #18 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "4.0-271-g09e8-dirty" Module #19 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0-271-g09e8-dirty" Module #20 Name: module-console-kit Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "4.0-271-g09e8-dirty" Module #21 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0-271-g09e8-dirty" Module #22 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0-271-g09e8-dirty" Module #23 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "4.0-271-g09e8-dirty" Module #24 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0-271-g09e8-dirty" Module #25 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0-271-g09e8-dirty" Module #26 Name: module-dbus-protocol Argument: Usage counter: n/a Properties: module.author = "Tanu Kaskinen" module.description = "D-Bus interface" module.version = "4.0-271-g09e8-dirty" Sink #0 State: SUSPENDED Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 6ch 48000Hz Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor Latency: 0 usec, configured 0 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "HDMI 1" alsa.id = "HDMI 1" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "7" alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:01:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "aab0" device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" device.string = "hdmi:0,1" device.buffering.buffer_size = "57600" device.buffering.fragment_size = "11520" device.access_mode = "mmap" device.profile.name = "hdmi-surround-extra1" device.profile.description = "Digital Surround 5.1 (HDMI)" device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI)" alsa.mixer_name = "ATI R6xx HDMI" alsa.components = "HDA:1002aa01,00aa0100,00100300" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, available) Active Port: hdmi-output-1 Formats: pcm Source #0 State: SUSPENDED Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor Description: Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 6ch 48000Hz Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 Latency: 0 usec, configured 0 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI)" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:01:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "aab0" device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm Client #0 Driver: module-systemd-login.c Owner Module: 21 Properties: application.name = "Login Session 1" systemd-login.session = "1" Client #3 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "4245" application.process.user = "john" application.process.host = "HTPC" application.process.binary = "pactl" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc" application.process.session_id = "1" Card #0 Name: alsa_card.pci-0000_01_00.1 Driver: module-alsa-card.c Owner Module: 6 Properties: alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:01:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "aab0" device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" device.string = "0" device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 400) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3300) output:hdmi-stereo-extra1: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 200) output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3100) output:hdmi-stereo-extra2: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 200) output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3100) output:hdmi-stereo-extra3: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 200) output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3100) off: Off (sinks: 0, sources: 0, priority: 0) Active Profile: output:hdmi-surround-extra1 Ports: hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo, output:hdmi-surround hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1 hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2 hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3 -------------- next part -------------- Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0-271-g09e8-dirty" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "4.0-271-g09e8-dirty" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0-271-g09e8-dirty" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0-271-g09e8-dirty" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: Module #5 Name: module-udev-detect Argument: tsched=0 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0-271-g09e8-dirty" Module #6 Name: module-alsa-card Argument: device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Usage counter: 0 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0-271-g09e8-dirty" Module #7 Name: module-jackdbus-detect Argument: channels=2 Usage counter: n/a Properties: module.author = "David Henningsson" module.description = "Adds JACK sink/source ports when JACK is started" module.version = "4.0-271-g09e8-dirty" Module #8 Name: module-bluetooth-policy Argument: Usage counter: n/a Properties: module.author = "Fr?d?ric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "4.0-271-g09e8-dirty" Module #9 Name: module-bluetooth-discover Argument: Usage counter: n/a Properties: module.author = "Jo?o Paulo Rechi Vita" module.description = "Detect available Bluetooth daemon and load the corresponding discovery module" module.version = "4.0-271-g09e8-dirty" Module #10 Name: module-bluez5-discover Argument: Usage counter: n/a Properties: module.author = "Jo?o Paulo Rechi Vita" module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers" module.version = "4.0-271-g09e8-dirty" Module #11 Name: module-bluez4-discover Argument: Usage counter: n/a Properties: module.author = "Jo?o Paulo Rechi Vita" module.description = "Detect available BlueZ 4 Bluetooth audio devices and load BlueZ 4 Bluetooth audio drivers" module.version = "4.0-271-g09e8-dirty" Module #12 Name: module-esound-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "ESOUND protocol (UNIX sockets)" module.version = "4.0-271-g09e8-dirty" Module #13 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0-271-g09e8-dirty" Module #14 Name: module-gconf Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "GConf Adapter" module.version = "4.0-271-g09e8-dirty" Module #15 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0-271-g09e8-dirty" Module #16 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" module.version = "4.0-271-g09e8-dirty" Module #17 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "4.0-271-g09e8-dirty" Module #18 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "4.0-271-g09e8-dirty" Module #19 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0-271-g09e8-dirty" Module #20 Name: module-console-kit Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "4.0-271-g09e8-dirty" Module #21 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0-271-g09e8-dirty" Module #22 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0-271-g09e8-dirty" Module #23 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "4.0-271-g09e8-dirty" Module #24 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0-271-g09e8-dirty" Module #25 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0-271-g09e8-dirty" Module #26 Name: module-dbus-protocol Argument: Usage counter: n/a Properties: module.author = "Tanu Kaskinen" module.description = "D-Bus interface" module.version = "4.0-271-g09e8-dirty" Sink #0 State: SUSPENDED Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 6ch 48000Hz Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor Latency: 0 usec, configured 0 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "HDMI 1" alsa.id = "HDMI 1" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "7" alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:01:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "aab0" device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" device.string = "hdmi:0,1" device.buffering.buffer_size = "57600" device.buffering.fragment_size = "11520" device.access_mode = "mmap" device.profile.name = "hdmi-surround-extra1" device.profile.description = "Digital Surround 5.1 (HDMI)" device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI)" alsa.mixer_name = "ATI R6xx HDMI" alsa.components = "HDA:1002aa01,00aa0100,00100300" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, available) Active Port: hdmi-output-1 Formats: pcm Source #0 State: SUSPENDED Name: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1.monitor Description: Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 6ch 48000Hz Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-surround-extra1 Latency: 0 usec, configured 0 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Surround 5.1 (HDMI)" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:01:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "aab0" device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm Client #0 Driver: module-systemd-login.c Owner Module: 21 Properties: application.name = "Login Session 1" systemd-login.session = "1" Client #3 Driver: protocol-native.c Owner Module: 13 Properties: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "4245" application.process.user = "john" application.process.host = "HTPC" application.process.binary = "pactl" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "5cd3ebb884298f8df57b1e43000003bc" application.process.session_id = "1" Card #0 Name: alsa_card.pci-0000_01_00.1 Driver: module-alsa-card.c Owner Module: 6 Properties: alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbcfc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:01:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "aab0" device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" device.string = "0" device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 400) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3300) output:hdmi-stereo-extra1: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 200) output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3100) output:hdmi-stereo-extra2: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 200) output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3100) output:hdmi-stereo-extra3: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 200) output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3100) off: Off (sinks: 0, sources: 0, priority: 0) Active Profile: output:hdmi-surround-extra1 Ports: hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo, output:hdmi-surround hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1 hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2 hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3
