'Twas brillig, and Tarantism at 04/03/11 22:23 did gyre and gimble: > I need to implement a volume scaling in a pulse module. > I have 0-100 input values. > What algorithm does pulse usually implement for this so that I can match > it? Can you explain a little more what you're trying to do? You shouldn't generally need to worry about volume scaling in PA modules. But ultimately PA scales volumes between PA_VOLUME_MIN (aka 0%, aka -inf dB) and PA_VOLUME_NORM (aka 100%, aka 0dB) typically, but really the upper volume is PA_VOLUME_MAX (aka Lots%, aka +Lots dB). But if you explain in a bit more detail we can probably advise you better. I don't think you'll need to do any specific volume handling unless you are writing a very specific module. Col -- Colin Guthrie gmane(at)colin.guthr.ie http://colin.guthr.ie/ Day Job: Tribalogic Limited [http://www.tribalogic.net/] Open Source: Mageia Contributor [http://www.mageia.org/] PulseAudio Hacker [http://www.pulseaudio.org/] Trac Hacker [http://trac.edgewall.org/]
