Hi all, I have this sound card with several hw devices attached, this is, it's only one card but I can configure/route all its numerous pcm/hw devices to have different sink/sources. For saying something I have hw:0,0 for playback/capture, on hw:0,1 only capture, hw:0,2 again for playback/capture, on hw:0,3 hdmi and so on. I've configured this card in the past using module-alsa-sink/source for each hw device and it works pretty fine. Recently I tried to use the udev module instead of module-alsa-sink/source but only the first hw device is recognized (hw:0,0) correctly for playback/capture... I'm wondering if this is the intended way (only first available device will be used) or it should also be capable of detecting the other devices or I need to do something else (like writing udev-rule?) but i'm no expert on udev stuff... FWIW I can see that all hw devices are correctly listed in /dev/snd directory... (I have /dev/snd/controlC0 and all of the /dev/snd/pcmC0D* entries) Any ideas or help will be appreciated! Thanks, Abraham -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20100927/4248a523/attachment.htm>
