'Twas brillig, and Ozgur at 12/09/10 15:19 did gyre and gimble: > hi, > > finally after compile-updating 3/4 of my system, i was able to compile and make pulseaudio > up and running. It runs. applications such as mplayer/sype etc run, but there's no sound :( > checked out mixer, unmuted everything, no success. i'm using kernel 2.6.25.9 with no support > for udev and high resolution timers. > > here's the output of pulseaudio -v > any suggestions? Some general things: 1. Make sure you're compliing from the stable-queue branch in git. It's got ~170 odd patches on top of 0.9.21 that will likely become 0.9.22 in the not too distant future. 2. I'd recommend module-hal-detect rather than module-detect. This is deprecated in favour of udev, but it's still better for your old kernel. 3. I'd recommend updating your kernel to the latest one. You'll find a lot of alsa driver updates and other fixes that could ultimate affect things. Col -- Colin Guthrie gmane(at)colin.guthr.ie http://colin.guthr.ie/ Day Job: Tribalogic Limited [http://www.tribalogic.net/] Open Source: Mandriva Linux Contributor [http://www.mandriva.com/] PulseAudio Hacker [http://www.pulseaudio.org/] Trac Hacker [http://trac.edgewall.org/]
