Hello, i have resent had a system wide pulesaudio setup with network access on Ubuntu 10.04 server that work without any problem, now a have change to Debian Lenny for some other reason and I'm trying to do the same setup, it kind of work but (on networks clients) instead of have access to the entire card (no hardware listing) i now only have access to one output and one input and i often have to restart pulseaudio on the server because sound gets choppy. i hope someone can see what is wrong with this setup. kernel is 2.6.18.8 # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). soundcard 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Intel Corporation Device 0519 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at e8220000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel # pulseaudio --version pulseaudio 0.9.21 # pulseaudio --dump-conf ### Read from configuration file: /usr/local/etc/pulse/daemon.conf ### daemonize = yes fail = yes high-priority = yes nice-level = -11 realtime-scheduling = yes realtime-priority = 5 allow-module-loading = no allow-exit = no use-pid-file = yes system-instance = yes cpu-limit = no enable-shm = yes flat-volumes = yes lock-memory = no exit-idle-time = 20 scache-idle-time = 20 dl-search-path = /usr/local/lib/pulse-0.9.21/modules default-script-file = /usr/local/etc/pulse/system.pa load-default-script-file = yes log-target = auto log-level = notice resample-method = auto enable-remixing = yes enable-lfe-remixing = no default-sample-format = s16le default-sample-rate = 44100 default-sample-channels = 2 default-channel-map = front-left,front-right default-fragments = 4 default-fragment-size-msec = 25 shm-size-bytes = 0 log-meta = no log-time = no log-backtrace = 0 rlimit-fsize = -1 rlimit-data = -1 rlimit-stack = -1 rlimit-core = -1 rlimit-rss = -1 rlimit-as = -1 rlimit-nproc = -1 # pulseaudio --dump-modules module-alsa-card ALSA Card module-alsa-sink ALSA Sink module-alsa-source ALSA Source module-always-sink Always keeps at least one sink loaded even if it's a null one module-augment-properties Augment the property sets of streams with additional static information module-card-restore Automatically restore profile of cards module-cli Command line interface module-cli-protocol-tcp Command line interface protocol (TCP sockets) module-cli-protocol-unix Command line interface protocol (UNIX sockets) module-combine Combine multiple sinks to one module-cork-music-on-phone Mute or cork music while a phone stream exists module-default-device-restore Automatically restore the default sink and source module-detect Detect available audio hardware and load matching drivers module-device-manager Keep track of devices (and their descriptions) both past and present and prioritise by role module-device-restore Automatically restore the volume/mute state of devices module-esound-compat-spawnfd ESOUND compatibility module: -spawnfd emulation module-esound-compat-spawnpid ESOUND compatibility module: -spawnpid emulation module-esound-protocol-tcp ESOUND protocol (TCP sockets) module-esound-protocol-unix ESOUND protocol (UNIX sockets) module-esound-sink ESOUND Sink module-http-protocol-tcp HTTP (TCP sockets) module-http-protocol-unix HTTP (UNIX sockets) module-intended-roles Automatically set device of streams based of intended roles of devices module-ladspa-sink Virtual LADSPA sink module-loopback Loopback from source to sink module-match Playback stream expression matching module module-mmkbd-evdev Multimedia keyboard support via Linux evdev module-native-protocol-fd Native protocol autospawn helper module-native-protocol-tcp Native protocol (TCP sockets) module-native-protocol-unix Native protocol (UNIX sockets) module-null-sink Clocked NULL sink module-oss OSS Sink/Source module-pipe-sink UNIX pipe sink module-pipe-source UNIX pipe source module-position-event-sounds Position event sounds between L and R depending on the position on screen of the widget triggering them. module-raop-sink RAOP Sink module-remap-sink Virtual channel remapping sink module-rescue-streams When a sink/source is removed, try to move their streams to the default sink/source module-rtp-recv Receive data from a network via RTP/SAP/SDP module-rtp-send Read data from source and send it to the network via RTP/SAP/SDP module-simple-protocol-tcp Simple protocol (TCP sockets) module-simple-protocol-unix Simple protocol (UNIX sockets) module-sine Sine wave generator module-sine-source Sine wave generator source module-stream-restore Automatically restore the volume/mute/device state of streams module-suspend-on-idle When a sink/source is idle for too long, suspend it module-tunnel-sink Tunnel module for sinks module-tunnel-source Tunnel module for sources module-volume-restore Compatibility module rlimit-nofile = 256 rlimit-memlock = -1 rlimit-locks = -1 rlimit-sigpending = -1 rlimit-msgqueue = -1 rlimit-nice = 31 rlimit-rtprio = 9 rlimit-rttime = 1000000 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20100620/c1fb4731/attachment.htm>