On Thu, 18.02.10 00:09, Peter Kornatowski (pkorn at gmx.net) wrote: > Hello, > > 1. Is it possible to change the sinks or sources in an already > loaded module-combine or module-loopback without unloading and > reloading the module? Unless otherwise configured module-combine will automatically add all new hardware sinks to its outputs and drop those which go away. So this automatism does allow sinks/sources to be added dynamically/removed dynamically during runtime. However, there is no user API for that to trigger that in any way but by unplugging/plugging hardware. The streams module-loopback uses you can move around with pavucontrol or a similar tool. > 2. I also have a problem with sound distortions (mostly much higher > and "quicker" voice) several seconds after loading the > loopback-module (source is a bluetooth-headset and sink is my > soundcard). After some seconds the distortions disappear and > everything is fine. I found out that reducing the adjust_time > parameter of the loopback-module (I had to add adjust_time to > valid_modargs in the source code) also reduces the duration of the > distortions, but even at adjust_time=1 they remain for about 2 > seconds (and pulseaudio uses much more CPU). Setting it to 0 doesn't > work at all. Sounds as if there is something wrong with the device speed. which causes PA to compensate by resampling things. Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net http://0pointer.net/lennart/ GnuPG 0x1A015CC4