2010/2/11 Sebastien PIMENTA <pim at pulsradio.com>: > Hi, > > Can you tell me where is the log file of the debug mode ? > I've edited /etc/pulse/daemon.conf and uncommented log-level=debug but I > can't find the log file :S > > Lennart : concerning the card indexes, I'm not sure how to use the control > device name, like you said. > One of my problem is that I use darkice for recording and broadcasting and > its conf file is set up to record hw(1,0). If I don't edit > /etc/modprobe.d/alsa-base.conf to fix the sound card order, darkice will > record the wrong audio card after a reboot or suspend, because the card > order changes. I also have an icecast source, currently tied directly to the alsa stream for the soundcard. I wanted to put PulseAudio between it, for easier mixing and recording. Unfortunately darkice has no input module for pulse, only for alsa and others. After considering the possibility of writing a pulse module for darkice, I went for a solution using GStreamer. With a command like this you can replace darkice: gst-launch pulsesrc ! audioconvert ! vorbisenc ! oggmux ! shout2send mount=mountpoint.ogg Hope this is of use to you. > Thx
