Hello I'm trying out a set up that uses rtp-modules and the loopback module. The latencies seem ok, though they could be better, but after a minute long session I start getting the following messages and the sound deformed because of it. D: module-rtp-recv.c: Updating sample rate D: module-rtp-recv.c: wi=76986460 ri=75295321 D: module-rtp-recv.c: Write index deviates by 1739.96 ms, expected 500.00 ms D: module-rtp-recv.c: Updated sampling rate to 57834 Hz. D: module-rtp-recv.c: Requesting rewind due to end of underrun D: alsa-sink.c: Requested to rewind 65536 bytes. D: alsa-sink.c: Limited to 4740 bytes. D: alsa-sink.c: before: 1185 D: alsa-sink.c: after: 1185 D: alsa-sink.c: Rewound 4740 bytes. D: sink.c: Processing rewind... D: sink-input.c: Have to rewind 4740 bytes on render memblockq. D: sink-input.c: Have to rewind 4740 bytes on render memblockq. D: source.c: Processing rewind... Is there a way to prevent these underruns? Reloading the modules helps for a while until the same deformation in the sound come back. Also the log is filled with the followin errors and warnings. E: rtp.c: sendmsg() failed: Invalid argument E: rtp.c: sendmsg() failed: Invalid argument W: module-rtp-send.c: Failed to push chunk into memblockq. W: module-rtp-send.c: Failed to push chunk into memblockq. W: module-rtp-send.c: Failed to push chunk into memblockq. W: module-rtp-send.c: Failed to push chunk into memblockq. W: module-rtp-send.c: Failed to push chunk into memblockq. W: module-rtp-send.c: Failed to push chunk into memblockq. I don't have enough time to start digging the code. So I though I would ask here if there were any easy fix? Cheers, Jukka -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: pulseaudio.log URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20091121/0673fd0f/attachment.txt>
