OK, I've fiddled around with that udev rule and now it works like it's supposed to. And it seems almost everything here is on pci bus 0 :) $ ls /sys/bus/pci/devices/ 0000:00:00.0 0000:00:0f.0 0000:00:10.2 0000:00:11.5 0000:00:18.2 0000:00:01.0 0000:00:0f.1 0000:00:10.3 0000:00:12.0 0000:00:18.3 0000:00:0c.0 0000:00:10.0 0000:00:10.4 0000:00:18.0 0000:01:00.0 0000:00:0d.0 0000:00:10.1 0000:00:11.0 0000:00:18.1 On Tue, 2009-11-03 at 23:19 +0200, Valmantas Palik?a wrote: > Here's the lspci output: > > 00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host > Bridge (rev 01) > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge > [K8T800/K8T890 South] > 00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev > 08) > 00:0d.0 Multimedia video controller: Conexant Systems, Inc. > CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) > 00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID > Controller (rev 80) > 00:0f.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge > [KT600/K8T800/K8T890 South] > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. > VT8233/A/8235/8237 AC97 Audio Controller (rev 60) > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] > (rev 78) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > DRAM Controller > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce > 6600] (rev a2) > > On Tue, 2009-11-03 at 22:11 +0100, Lennart Poettering wrote: > > On Tue, 03.11.09 23:06, Valmantas Palik?a (walmis at gmail.com) wrote: > > > > > Since upgrading to ubuntu 9.10 devices in pavucontrol and gnome sound > > > settings are listed as "Internal Audio Analog Stereo". I have two sound > > > cards on my pc and both of them are listed with the same name. > > > Previously they were listed with actual card names like "VIA 8237", so > > > now it's kind of unclear which card should be used when moving streams > > > for example. > > > > > > Here's a fragment from pactl list > > > > > > Card #1 > > > Name: alsa_card.pci-0000_00_11.5 > > > Driver: module-alsa-card.c > > > Owner Module: 5 > > > Properties: > > > alsa.card = "1" > > > alsa.card_name = "VIA 8237" > > > > Hmm, that is surprising. How come you have two cards on PCI bus 0? > > Could you provide your lspci output? > > > > Currently we use the "Internal sound card" name for all PCI cards > > that are on PCU bus #0, which normally should be internal bus of the > > chipset. In your case this seems be an invalid assumption? > > > > The name is assigned indirectly, based on the SOUND_FORM_FACTOR udev > > property, which is set in /lib/udev/rules.d/78-sound-card.rules. You > > should be able to drop that special label by commenting a rule in > > that file. > > > > Ideally however I'd like to see this fixed properly, i.e. I am > > wondering if there is some way so that we can safely identify internal > > sound cards even for setups like yours. > > > > Lennart > > > >
