On Fri, 15.05.09 17:30, Hynek Hanke (hanke at brailcom.org) wrote: > > > Dear Lennart, > > I've set all the connection parameters to the values you > have suggested by default. This is > > pre_buffering = (uint32_t) -1; > maxlength = (uint32_t) -1; > prebuf = (uint32_t) -1; > > and PA_STREAM_ADJUST_LATENCY into the flags. > > The results are that on the 0.9.14 Pulse Audio that before > reported a 20ms latency ( = 0.0+2*9.98+0.0 ) was now > reporting 40ms ( = 0.0+2*20+0.0 ) on the same target length > of 400. We couldn't get better than 40 by increasing or decreasing > the target length. > > When we got 0.9.15 fully working now, I can confirm what Luke Yelavich > says, that the latency increased (on the same parameter configuration > described above). In our setting it is about 200ms (= 80.0 + 2*20 + 80.0) > and by modifying just tlength, we are not able to make it lower. Could you please extract a minimal test case for me, then I'll have a look on it to find out what's wrong. Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net http://0pointer.net/lennart/ GnuPG 0x1A015CC4
