Hello!
When I switch a sink-input (MPD) to a sink that has been remapped, PA
crashes with the following error:
E: sink.c: Assertion '!s->thread_info.rewind_requested' failed at
pulsecore/sink.c:640, function pa_sink_render(). Aborting.
I have three sound cards (integrated sound and two USB cards). I have
remapped them to name them zone1, zone2 and zone3. I then start an MPD
server and music plays. I can switch them between the original three
(non-remapped) sinks without error. I can also switch them from the
non-remapped sink and the remapped sink that corresponds to the same
hardware (so index 0 <--> index 3, etc.). However, if I go from (e.g.)
the integrated sound and a *remapped* USB card, PA crashes. In each case,
it crashes in the same way.
I am running Ubuntu 9.04. According to apt-get, I am running the latest
version of PA.
The following log was created by starting pulseaudio manually with the
command:
pulseaudio -vvvvv 2>pa.log
If you have any further questions, please do not hesitate to ask.
Thank you,
Tim Massey
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
I: caps.c: Dropping root privileges.
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
D: main.c: Started as real root: no, suid root: yes
I: main.c: PolicyKit refuses acquire-high-priority privilege.
N: main.c: Called SUID root and real-time and/or high-priority scheduling
was requested in the configuration. However, we lack the necessary
privileges:
N: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us
the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO
resource limits.
N: main.c: For enabling real-time/high-priority scheduling please acquire
the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or
increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not
permitted
I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not
permitted
D: main.c: Can realtime: no, can high-priority: no
D: main.c: Can realtime: no, can high-priority: no
I: main.c: This is PulseAudio 0.9.14
D: main.c: Compilation host: i486-pc-linux-gnu
D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra
-pedantic -pipe -Wno-long-long -Wvla -Wno-overlength-strings -Wconversion
-Wundef -Wformat -Wlogical-op -Wpacked -Wformat-security
-Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition
-Wdeclaration-after-statement -Wfloat-equal -Wmissing-declarations
-Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls
-Wmissing-noreturn -Wshadow -Wendif-labels -Wpointer-arith -Wcast-align
-Wwrite-strings -Wno-unused-parameter -ffast-math
D: main.c: Running on host: Linux i686 2.6.28-11-generic #42-Ubuntu SMP
Fri Apr 17 01:57:59 UTC 2009
I: main.c: Page size is 4096 bytes
D: main.c: Compiled with Valgrind support: no
D: main.c: Running in valgrind mode: no
D: main.c: Optimized build: yes
I: main.c: Machine ID is 348d0ae4200c34a4c7cb4ee94a45357f.
I: main.c: Using runtime directory
/home/tmassey/.pulse/348d0ae4200c34a4c7cb4ee94a45357f:runtime.
I: main.c: Using state directory /home/tmassey/.pulse.
I: main.c: Running in system mode: no
W: pid.c: Stale PID file, overwriting.
I: main.c: Fresh high-resolution timers available! Bon appetit!
D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB
each, total size is 64.0 MiB, maximum usable slot size is 65496
D: cli-command.c: Checking for existance of
'/usr/lib/pulse-0.9/modules/module-gconf.so': success
D: module-gconf.c: Loading module 'module-native-protocol-tcp' with args
'auth-anonymous=1' due to GConf configuration.
I: module.c: Loaded "module-native-protocol-tcp" (index: #0; argument:
"auth-anonymous=1").
D: module-gconf.c: Loading module 'module-esound-protocol-tcp' with args
'auth-anonymous=1' due to GConf configuration.
I: module.c: Loaded "module-esound-protocol-tcp" (index: #1; argument:
"auth-anonymous=1").
I: module.c: Loaded "module-gconf" (index: #2; argument: "").
I: module.c: Loaded "module-suspend-on-idle" (index: #3; argument: "").
I: module-device-restore.c: Sucessfully opened database file
'/home/tmassey/.pulse/348d0ae4200c34a4c7cb4ee94a45357f:device-volumes.i486-pc-linux-gnu.gdbm'.
I: module.c: Loaded "module-device-restore" (index: #4; argument: "").
I: module-stream-restore.c: Sucessfully opened database file
'/home/tmassey/.pulse/348d0ae4200c34a4c7cb4ee94a45357f:stream-volumes.i486-pc-linux-gnu.gdbm'.
I: module.c: Loaded "module-stream-restore" (index: #5; argument: "").
D: cli-command.c: Checking for existance of
'/usr/lib/pulse-0.9/modules/module-hal-detect.so': success
I: module-hal-detect.c: Trying capability alsa
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/computer_alsa_timer
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/computer_alsa_sequencer
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/pci_8086_2445_sound_card_0_alsa_capture_1
D: module-hal-detect.c: Loading module-alsa-sink with arguments
'device_id=2
sink_name=alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 tsched=0'
D: alsa-util.c: Trying front:2 with SND_PCM_NO_AUTO_FORMAT ...
I: module-alsa-sink.c: Successfully opened device front:2.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:2
I: alsa-util.c: Unable to attach to mixer front:2: No such file or
directory
I: alsa-util.c: Successfully attached to mixer 'hw:2'
I: alsa-util.c: Cannot find mixer control "Master" or mixer control is no
combination of switch/volume.
I: alsa-util.c: Using mixer control "PCM".
I: module-device-restore.c: Restoring volume for sink
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.
I: module-device-restore.c: Restoring mute state for sink
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.
I: sink.c: Created sink 0
"alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0" with sample spec
s16le 2ch 44100Hz and channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor.
I: module-device-restore.c: Restoring mute state for source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor.
I: source.c: Created source 0
"alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor" with
sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-alsa-sink.c: Using 8 fragments of size 1764 bytes, buffer time
is 80.00ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-alsa-sink.c: Volume ranges from 0 to 31.
I: module-alsa-sink.c: Volume ranges from -34.50 dB to 12.00 dB.
I: alsa-util.c: All 2 channels can be mapped to mixer channels.
I: module-alsa-sink.c: Using hardware volume control. Hardware dB scale
supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 2 'Intel 82801BA-ICH2' device 0
subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 3528
D: alsa-util.c: period_size : 441
D: alsa-util.c: period_time : 10000
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 441
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1849688064
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1849688064
D: module-alsa-sink.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29
D: module-alsa-sink.c: Requested volume: 0: 81% 1: 81%
D: module-alsa-sink.c: Got hardware volume: 0: 82% 1: 82%
D: module-alsa-sink.c: Calculated software volume: 0: 98% 1: 98%
I: module-alsa-sink.c: Starting playback.
D: module-suspend-on-idle.c: Source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor becomes
idle.
D: module-suspend-on-idle.c: Sink
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 becomes idle.
I: module.c: Loaded "module-alsa-sink" (index: #6; argument: "device_id=2
sink_name=alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0
tsched=0").
D: module-hal-detect.c: Loading module-alsa-source with arguments
'device_id=2
source_name=alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0 tsched=0'
D: alsa-util.c: Trying front:2 with SND_PCM_NO_AUTO_FORMAT ...
I: module-alsa-source.c: Successfully opened device front:2.
I: module-alsa-source.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:2
I: alsa-util.c: Unable to attach to mixer front:2: No such file or
directory
I: alsa-util.c: Successfully attached to mixer 'hw:2'
I: alsa-util.c: Using mixer control "Capture".
I: module-device-restore.c: Restoring volume for source
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0.
I: module-device-restore.c: Restoring mute state for source
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0.
I: source.c: Created source 1
"alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0" with sample spec
s16le 2ch 44100Hz and channel map front-left,front-right
I: module-alsa-source.c: Using 8 fragments of size 1764 bytes, buffer time
is 80.00ms
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-alsa-source.c: Volume ranges from 0 to 15.
I: module-alsa-source.c: Volume ranges from 0.00 dB to 22.50 dB.
I: alsa-util.c: All 2 channels can be mapped to mixer channels.
I: module-alsa-source.c: Using hardware volume control. Hardware dB scale
supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 2 'Intel 82801BA-ICH2' device 0
subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : CAPTURE
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 3528
D: alsa-util.c: period_size : 441
D: alsa-util.c: period_time : 10000
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 441
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1849688064
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1849688064
D: module-alsa-source.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+28
D: module-alsa-source.c: Requested volume: 0: 62% 1: 62%
D: module-alsa-source.c: Got hardware volume: 0: 62% 1: 62%
D: module-alsa-source.c: Calculated software volume: 0: 100% 1: 100%
D: module-suspend-on-idle.c: Source
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0 becomes idle.
I: module.c: Loaded "module-alsa-source" (index: #7; argument:
"device_id=2
source_name=alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0
tsched=0").
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/pci_8086_2445_sound_card_0_alsa_control__1
D: module-hal-detect.c: Loading module-alsa-sink with arguments
'device_id=0
sink_name=alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
tsched=0'
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
W: alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000
Hz.
I: module-alsa-sink.c: Successfully opened device front:0.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: No such file or
directory
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Master".
I: module-device-restore.c: Restoring volume for sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.
I: module-device-restore.c: Restoring mute state for sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.
I: sink.c: Created sink 1
"alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0"
with sample spec s16le 2ch 48000Hz and channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor.
I: module-device-restore.c: Restoring mute state for source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor.
I: source.c: Created source 2
"alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor"
with sample spec s16le 2ch 48000Hz and channel map front-left,front-right
I: module-alsa-sink.c: Using 8 fragments of size 1920 bytes, buffer time
is 80.00ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-alsa-sink.c: Volume ranges from 0 to 255.
I: module-alsa-sink.c: Volume ranges from -47.87 dB to -1.97 dB.
I: alsa-util.c: All 2 channels can be mapped to mixer channels.
I: module-alsa-sink.c: Using hardware volume control. Hardware dB scale
supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 0 'Sound Blaster MP3+' device 0
subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 48000
D: alsa-util.c: exact rate : 48000 (48000/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 3840
D: alsa-util.c: period_size : 480
D: alsa-util.c: period_time : 10000
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 480
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 2013265920
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 2013265920
D: module-alsa-sink.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+27
D: module-alsa-sink.c: Requested volume: 0: 100% 1: 100%
D: module-alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
D: module-alsa-sink.c: Calculated software volume: 0: 100% 1: 100%
I: module-alsa-sink.c: Starting playback.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes idle.
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
becomes idle.
I: module.c: Loaded "module-alsa-sink" (index: #8; argument: "device_id=0
sink_name=alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
tsched=0").
D: module-hal-detect.c: Loading module-alsa-source with arguments
'device_id=0
source_name=alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
tsched=0'
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: module-alsa-source.c: Successfully opened device front:0.
I: module-alsa-source.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: No such file or
directory
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Cannot find mixer control "Capture" or mixer control is no
combination of switch/volume.
I: alsa-util.c: Using mixer control "Mic".
I: module-device-restore.c: Restoring volume for source
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0.
I: module-device-restore.c: Restoring mute state for source
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0.
I: source.c: Created source 3
"alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0"
with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-alsa-source.c: Using 8 fragments of size 1764 bytes, buffer time
is 80.00ms
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-alsa-source.c: Volume ranges from 0 to 128.
I: module-alsa-source.c: Volume ranges from -0.18 dB to 22.86 dB.
I: alsa-util.c: ALSA device lacks independant volume controls for each
channel.
I: module-alsa-source.c: Using hardware volume control. Hardware dB scale
supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 0 'Sound Blaster MP3+' device 0
subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : CAPTURE
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 3528
D: alsa-util.c: period_size : 441
D: alsa-util.c: period_time : 10000
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 441
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1849688064
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1849688064
D: module-alsa-source.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+26
D: module-alsa-source.c: Requested volume: 0: 61% 1: 61%
D: module-alsa-source.c: Got hardware volume: 0: 61% 1: 61%
D: module-alsa-source.c: Calculated software volume: 0: 100% 1: 100%
D: module-suspend-on-idle.c: Source
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
becomes idle.
I: module.c: Loaded "module-alsa-source" (index: #9; argument:
"device_id=0
source_name=alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
tsched=0").
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/usb_device_41e_3010_noserial_if0_sound_card_0_alsa_control__1
D: module-hal-detect.c: Loading module-alsa-sink with arguments
'device_id=1
sink_name=alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
tsched=0'
D: alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: module-alsa-sink.c: Successfully opened device front:1.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
I: (alsa-lib)control.c: Invalid CTL front:1
I: alsa-util.c: Unable to attach to mixer front:1: No such file or
directory
I: alsa-util.c: Successfully attached to mixer 'hw:1'
I: alsa-util.c: Cannot find mixer control "Master" or mixer control is no
combination of switch/volume.
I: alsa-util.c: Using mixer control "PCM".
I: module-device-restore.c: Restoring volume for sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.
I: module-device-restore.c: Restoring mute state for sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.
I: sink.c: Created sink 2
"alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0"
with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor.
I: module-device-restore.c: Restoring mute state for source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor.
I: source.c: Created source 4
"alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor"
with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-alsa-sink.c: Using 8 fragments of size 1764 bytes, buffer time
is 80.00ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-alsa-sink.c: Volume ranges from 0 to 9472.
W: module-alsa-sink.c: Your kernel driver is broken: it reports a volume
range from -37.00 dB to -37.00 dB which makes no sense.
I: alsa-util.c: All 2 channels can be mapped to mixer channels.
I: module-alsa-sink.c: Using hardware volume control. Hardware dB scale
not supported.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Hardware PCM card 1 'USB Sound Device ' device 0
subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 3528
D: alsa-util.c: period_size : 441
D: alsa-util.c: period_time : 10000
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 441
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 1849688064
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 1849688064
D: module-alsa-sink.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+25
I: module-alsa-sink.c: Starting playback.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes idle.
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
becomes idle.
I: module.c: Loaded "module-alsa-sink" (index: #10; argument: "device_id=1
sink_name=alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
tsched=0").
D: module-hal-detect.c: Not loaded device
/org/freedesktop/Hal/devices/usb_device_d8c_103_noserial_if0_sound_card_0_alsa_control__1
I: module-hal-detect.c: Loaded 5 modules.
I: module.c: Loaded "module-hal-detect" (index: #11; argument:
"tsched=0").
D: cli-command.c: Checking for existance of
'/usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so': success
I: module.c: Loaded "module-esound-protocol-unix" (index: #12; argument:
"").
I: module.c: Loaded "module-native-protocol-unix" (index: #13; argument:
"").
I: module-default-device-restore.c: Restored default sink
'alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0'.
D: core-subscribe.c: Dropped redundant event due to change event.
I: module-default-device-restore.c: Restored default source
'alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0'.
I: module.c: Loaded "module-default-device-restore" (index: #14; argument:
"").
I: module.c: Loaded "module-rescue-streams" (index: #15; argument: "").
I: module.c: Loaded "module-always-sink" (index: #16; argument: "").
I: client.c: Created 0 "ConsoleKit Session
/org/freedesktop/ConsoleKit/Session1"
D: module-console-kit.c: Added new session
/org/freedesktop/ConsoleKit/Session1
I: module.c: Loaded "module-console-kit" (index: #17; argument: "").
I: module.c: Loaded "module-position-event-sounds" (index: #18; argument:
"").
W: module-remap-sink.c: No remapping configured, proceeding nonetheless!
I: module-device-restore.c: Restoring volume for sink zone1.
I: module-device-restore.c: Restoring mute state for sink zone1.
I: sink.c: Created sink 3 "zone1" with sample spec s16le 2ch 44100Hz and
channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source zone1.monitor.
I: module-device-restore.c: Restoring mute state for source zone1.monitor.
I: source.c: Created source 5 "zone1.monitor" with sample spec s16le 2ch
44100Hz and channel map front-left,front-right
I: module-stream-restore.c: Not restore device for stream
sink-input-by-media-role:filter, because already set.
I: module-stream-restore.c: Restoring volume for sink input
sink-input-by-media-role:filter.
I: module-stream-restore.c: Restoring mute state for sink input
sink-input-by-media-role:filter.
D: module-suspend-on-idle.c: Sink
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 becomes busy.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: sink-input.c: Created input 0 "Remapped Stream" on
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 with sample spec
s16le 2ch 44100Hz and channel map front-left,front-right
D: module-suspend-on-idle.c: Source zone1.monitor becomes idle.
D: module-suspend-on-idle.c: Sink zone1 becomes idle.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-remap-sink.c: Requesting rewind due to state change.
I: module.c: Loaded "module-remap-sink" (index: #19; argument:
"sink_name=zone1
master=alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 channels=2
master_channel_map=front-left,front-right
channel_map=front-left,front-right").
W: module-remap-sink.c: No remapping configured, proceeding nonetheless!
I: module-device-restore.c: Restoring volume for sink zone2.
I: module-device-restore.c: Restoring mute state for sink zone2.
I: sink.c: Created sink 4 "zone2" with sample spec s16le 2ch 48000Hz and
channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source zone2.monitor.
I: module-device-restore.c: Restoring mute state for source zone2.monitor.
I: source.c: Created source 6 "zone2.monitor" with sample spec s16le 2ch
48000Hz and channel map front-left,front-right
I: module-stream-restore.c: Not restore device for stream
sink-input-by-media-role:filter, because already set.
I: module-stream-restore.c: Restoring volume for sink input
sink-input-by-media-role:filter.
I: module-stream-restore.c: Restoring mute state for sink input
sink-input-by-media-role:filter.
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
becomes busy.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: sink-input.c: Created input 1 "Remapped Stream" on
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
with sample spec s16le 2ch 48000Hz and channel map front-left,front-right
D: module-suspend-on-idle.c: Source zone2.monitor becomes idle.
D: module-suspend-on-idle.c: Sink zone2 becomes idle.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-remap-sink.c: Requesting rewind due to state change.
I: module.c: Loaded "module-remap-sink" (index: #20; argument:
"sink_name=zone2
master=alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
channels=2 master_channel_map=front-left,front-right
channel_map=front-left,front-right").
W: module-remap-sink.c: No remapping configured, proceeding nonetheless!
I: module-device-restore.c: Restoring volume for sink zone3.
I: module-device-restore.c: Restoring mute state for sink zone3.
I: sink.c: Created sink 5 "zone3" with sample spec s16le 2ch 44100Hz and
channel map front-left,front-right
I: module-device-restore.c: Restoring volume for source zone3.monitor.
I: module-device-restore.c: Restoring mute state for source zone3.monitor.
I: source.c: Created source 7 "zone3.monitor" with sample spec s16le 2ch
44100Hz and channel map front-left,front-right
I: module-stream-restore.c: Not restore device for stream
sink-input-by-media-role:filter, because already set.
I: module-stream-restore.c: Restoring volume for sink input
sink-input-by-media-role:filter.
I: module-stream-restore.c: Restoring mute state for sink input
sink-input-by-media-role:filter.
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
becomes busy.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: sink-input.c: Created input 2 "Remapped Stream" on
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
D: module-suspend-on-idle.c: Source zone3.monitor becomes idle.
D: module-suspend-on-idle.c: Sink zone3 becomes idle.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-remap-sink.c: Requesting rewind due to state change.
I: module.c: Loaded "module-remap-sink" (index: #21; argument:
"sink_name=zone3
master=alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
channels=2 master_channel_map=front-left,front-right
channel_map=front-left,front-right").
I: main.c: Daemon startup complete.
D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus,
path=/org/freedesktop/DBus, member=NameAcquired
D: module-console-kit.c: dbus: interface=org.freedesktop.DBus,
path=/org/freedesktop/DBus, member=NameAcquired
I: module-stream-restore.c: Storing volume/mute/device for stream
sink-input-by-media-role:filter.
I: module-stream-restore.c: Storing volume/mute/device for stream
sink-input-by-media-role:filter.
I: module-stream-restore.c: Storing volume/mute/device for stream
sink-input-by-media-role:filter.
I: module-suspend-on-idle.c: Source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor idle for
too long, suspending ...
I: module-suspend-on-idle.c: Source
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0 idle for too long,
suspending ...
I: module-alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
idle for too long, suspending ...
I: module-suspend-on-idle.c: Source
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
idle for too long, suspending ...
I: module-alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
idle for too long, suspending ...
I: module-suspend-on-idle.c: Source zone1.monitor idle for too long,
suspending ...
I: module-suspend-on-idle.c: Sink zone1 idle for too long, suspending ...
D: sink-input.c: Requesting rewind due to corking
D: module-suspend-on-idle.c: Sink
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 becomes idle.
I: module-suspend-on-idle.c: Source zone2.monitor idle for too long,
suspending ...
I: module-suspend-on-idle.c: Sink zone2 idle for too long, suspending ...
D: sink-input.c: Requesting rewind due to corking
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
becomes idle.
I: module-suspend-on-idle.c: Source zone3.monitor idle for too long,
suspending ...
I: module-suspend-on-idle.c: Sink zone3 idle for too long, suspending ...
D: sink-input.c: Requesting rewind due to corking
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
becomes idle.
I: socket-server.c: TCP connection accepted by tcpwrap.
I: protocol-native.c: Client authenticated anonymously.
I: client.c: Created 1 "Native client (TCP/IP client from
127.0.0.1:58914)"
D: protocol-native.c: Protocol version: remote 14, local 14
D: protocol-native.c: SHM possible: no
D: protocol-native.c: Negotiated SHM: no
I: module-stream-restore.c: Restoring device for stream
sink-input-by-application-name:mpd.
I: module-stream-restore.c: Restoring volume for sink input
sink-input-by-application-name:mpd.
D: module-stream-restore.c: Not restoring mute state for sink input
sink-input-by-application-name:mpd, because already set.
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
becomes busy.
I: resampler.c: Using resampler 'src-linear'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: sink-input.c: Created input 3 "My MPD PulseAudio Output" on
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: protocol-native.c: Requested tlength=250.00 ms, minreq=20.00 ms
D: protocol-native.c: Traditional mode enabled, modifying sink usec only
for compat with minreq.
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=44100,
base=4, prebuf=40576, minreq=3528 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=44100,
base=4, prebuf=40576, minreq=3528 maxrewind=0
I: protocol-native.c: Final latency 460.00 ms = 210.00 ms + 2*20.00 ms +
210.00 ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: protocol-native.c: Requesting rewind due to end of underrun.
I: module-suspend-on-idle.c: Sink
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0 idle for too long,
suspending ...
I: module-alsa-sink.c: Device suspended...
I: module-suspend-on-idle.c: Sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
idle for too long, suspending ...
I: module-alsa-sink.c: Device suspended...
I: module-stream-restore.c: Synced.
I: socket-server.c: TCP connection accepted by tcpwrap.
I: protocol-native.c: Client authenticated anonymously.
I: client.c: Created 2 "Native client (TCP/IP client from
127.0.1.1:39042)"
D: protocol-native.c: Protocol version: remote 14, local 14
D: protocol-native.c: SHM possible: no
D: protocol-native.c: Negotiated SHM: no
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
D: module-suspend-on-idle.c: Source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor becomes
idle.
D: module-suspend-on-idle.c: Source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor becomes
busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 0 "Peak detect" on
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor with sample
spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
I: module-alsa-source.c: Trying resume...
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-alsa-source.c: Resumed successfully...
D: module-suspend-on-idle.c: Source
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0 becomes idle.
D: module-suspend-on-idle.c: Source
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0 becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 1 "Peak detect" on
alsa_input.pci_8086_2445_sound_card_0_alsa_capture_0 with sample spec
float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes idle.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 2 "Peak detect" on
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
with sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
I: module-alsa-source.c: Trying resume...
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-alsa-source.c: Resumed successfully...
D: module-suspend-on-idle.c: Source
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
becomes idle.
D: module-suspend-on-idle.c: Source
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 3 "Peak detect" on
alsa_input.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_capture_0
with sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
D: module-alsa-source.c: hwbuf_unused=0
D: module-alsa-source.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes idle.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 4 "Peak detect" on
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
with sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
D: module-suspend-on-idle.c: Source zone1.monitor becomes idle.
D: module-suspend-on-idle.c: Source zone1.monitor becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 5 "Peak detect" on zone1.monitor with
sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
D: module-suspend-on-idle.c: Source zone2.monitor becomes idle.
D: module-suspend-on-idle.c: Source zone2.monitor becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 6 "Peak detect" on zone2.monitor with
sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Not restoring device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol, because
already set
D: module-suspend-on-idle.c: Source zone3.monitor becomes idle.
D: module-suspend-on-idle.c: Source zone3.monitor becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 7 "Peak detect" on zone3.monitor with
sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
D: module-suspend-on-idle.c: Source
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor becomes
busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 8 "Peak detect" on
alsa_output.pci_8086_2445_sound_card_0_alsa_playback_0.monitor with sample
spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 9 "Peak detect" on
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
with sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 10 "Peak detect" on
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0.monitor
with sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
D: module-suspend-on-idle.c: Source
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
becomes busy.
D: resampler.c: Channel matrix:
D: resampler.c: I00 I01
D: resampler.c: +------------
D: resampler.c: O00 | 1.000 1.000
I: resampler.c: Using resampler 'peaks'
I: resampler.c: Using float32le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 11 "Peak detect" on
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0.monitor
with sample spec float32le 1ch 25Hz and channel map mono
D: memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304,
base=4, prebuf=4, minreq=4 maxrewind=0
I: protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-application-id:org.PulseAudio.pavucontrol.
I: module-stream-restore.c: Synced.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: source-output.c: Freeing output 11 "Peak detect"
D: sink-input.c: Requesting rewind due to uncorking
I: module-alsa-sink.c: Trying resume...
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
I: module-alsa-sink.c: Resumed successfully...
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_d8c_103_noserial_if0_sound_card_0_alsa_playback_0
becomes busy.
I: module-alsa-sink.c: Starting playback.
D: module-suspend-on-idle.c: Sink zone3 becomes idle.
D: module-suspend-on-idle.c: Sink zone3 becomes busy.
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
becomes idle.
D: sink-input.c: Have to rewind 14800 bytes on render memblockq.
D: sink-input.c: Have to rewind 13964 bytes on implementor.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: sink.c: Requesting rewind due to started move
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432,
base=4, prebuf=0, minreq=4 maxrewind=0
D: module-suspend-on-idle.c: Sink
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
becomes idle.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: sink.c: Requesting rewind due to finished move
I: protocol-native.c: Requested tlength=250.00 ms, minreq=20.00 ms
D: protocol-native.c: Adjust latency mode enabled, configuring sink
latency to half of overall latency.
D: module-alsa-sink.c: hwbuf_unused=0
D: module-alsa-sink.c: setting avail_min=1
D: sink-input.c: Successfully moved sink input 3 from
alsa_output.usb_device_41e_3010_noserial_if0_sound_card_0_alsa_playback_0
to zone3.
I: module-stream-restore.c: Storing volume/mute/device for stream
sink-input-by-application-name:mpd.
E: sink.c: Assertion '!s->thread_info.rewind_requested' failed at
pulsecore/sink.c:640, function pa_sink_render(). Aborting.
