On Fri, 12.06.09 11:21, Jan Kasprzak (kas at fi.muni.cz) wrote: > Hello, > > in Fedora 10 (PA 0.9.14) I used to have a virtual soundcards configured > by the following lines in .pulse/default.pa: > > load-module module-alsa-sink sink_name=Speakers device=hw:0 channels=4 channel_map=front-left,front-right,aux0,aux1 > load-module module-remap-sink master=Speakers channels=2 master_channel_map=aux0,aux1 channel_map=front-left,front-right > > This no longer works in Fedora 11 (PA 0.9.15) - it seems that > "load-module module-alsa-sink" does not want to accept any of the above > parameters. I have tried even a bare "channels=4", which according to > http://pulseaudio.org/wiki/Modules should be accepted by any device driver > module. Pulseaudio fails with > > E: module.c: Failed to load module "module-alsa-sink" (argument: "channels=4"): initialization failed. Before that line there should be an explanation what's going on. Most likely it's simply that the audio device is blocked already. Try running PA as "pulseaudio -vvvvv" to find out more. Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net http://0pointer.net/lennart/ GnuPG 0x1A015CC4
