On Mon, 23.11.09 21:05, thaler (jth at gmx.net) wrote: > Hi, > > I have upgraded my system to Fedora 12 and I have PulseAudio 0.9.19. > > My problem is that I have a switch "IEC958" (= S/PDIF) and I want to disable it. (Because if it is on, a red light disturb me) > > With the old version (Fedora 10), I simply uncheck the box in the volume control window. > > With the new version I added to following line to analog-output.conf.common: > > [Element IEC958] > switch = select > > [Option IEC958:on] > name = output-iec958-on > priority = 10 > > [Option IEC958:off] > name = output-iec958-off > priority = 0 > > > Now my problem is: I can choose output-iec958-off in the g-v-c and the switch will go off. Then I play a sound and the switch goes ON again. > > Same behavior with > [Element IEC958] > switch = off > > I am at my wit's end. ;) That switch is normally controlled by the spdif:xxx alsa devices. Those devices are used when you select a digital output profile for the card meaning that the profile and the port selection will collide. Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net http://0pointer.net/lennart/ GnuPG 0x1A015CC4
