Le dimanche 06 d?cembre 2009 ? 01:09 +0200, Tanu Kaskinen a ?crit : > la, 2009-12-05 kello 23:01 +0100, Benjamin de Besses kirjoitti: > > Hi, > > > > I have a similar problem with parec that the one describes in the > > following > > https://tango.0pointer.de/pipermail/pulseaudio-discuss/2009-September/005077.html > > > > I am capturing the simultaneous output called combined.monitor with the > > module-suspend-on-idle unloaded and when the combined.monitor goes on > > idle parec stop to send data (i.e. silence) to the vlc pipe. > > > > Here the command I have used > > > > parec --device=$SEL_DEVICE --format=s16le --rate=44100 --channels=2 | \ > > vlc --no-video --demux=rawaud --rawaud-fourcc=s16l \ > > --rawaud-samplerate=44100 --rawaud-channels=2 \ > > --file-caching=500 --open="-" \ > > --sout=SOMEWHERE-ON-A-NETWORK > > Are you sure the silence doesn't just come in bigger (and thus less > frequent) chunks? This thread may be interesting: > https://tango.0pointer.de/pipermail/pulseaudio-discuss/2009-October/005200.html > Interesting point but parec really doesn't record the silence of the combined.monitor device. With the command: parec --device=alsa_output.pci-0000_00_1b.0.analog-stereo.monitor --format=s16le --rate=44100 --channels=2 --verbose test.pcm parec record the silence perfectly But with the command: parec --device=combined.monitor --format=s16le --rate=44100 --channels=2 --verbose test.pcm parec do not to record the silence when combined.monitor goes on idle: the test.pcm file size the time stop to increase. bnj
