Nickie Deuxyeux wrote: > Hello everyone, > > I am struggling to make my simple RTP setup work correctly. I have one > sender and one receiver, both running the latest pulseaudio 0.9.15. > Normal "module-native-protocol-tcp" works fine with pulseaudio client > (I am using mplayer to test) running from the sender side, but when I > start the pulseaudio server on the sender side and start the receiver > side, I have the following output: I also met the same issue on PA 0.9.15, :( Anyone works fine with rtp module or has some ideas about it? Thanks. -- vivian > > -------CUT------- > I: module-rtp-recv.c: New session 'PulseAudio RTP Stream on > atom.splava.ru' D: module-rtp-recv.c: Requesting rewind due to end of > underrun > D: alsa-sink.c: Requested to rewind 65536 bytes. > D: alsa-sink.c: Limited to 37984 bytes. > D: alsa-sink.c: before: 9496 > D: alsa-sink.c: after: 9496 > D: alsa-sink.c: Rewound 37984 bytes. > D: sink.c: Processing rewind... > D: sink-input.c: Have to rewind 37984 bytes on render memblockq. > D: source.c: Processing rewind... > D: module-rtp-recv.c: Updating sample rate > D: module-rtp-recv.c: wi=2767821 ri=2663038 > D: module-rtp-recv.c: Write index deviates by 270.23 ms, expected > 500.00 ms D: module-rtp-recv.c: Updated sampling rate to 42074 Hz. > I: alsa-sink.c: Underrun! > N: alsa-sink.c: Increasing wakeup watermark to 30.00 ms > D: module-rtp-recv.c: Requesting rewind due to end of underrun > D: alsa-sink.c: Requested to rewind 65532 bytes. > D: alsa-sink.c: Limited to 36228 bytes. > D: alsa-sink.c: before: 9057 > D: alsa-sink.c: after: 9057 > D: alsa-sink.c: Rewound 36228 bytes. > D: sink.c: Processing rewind... > D: sink-input.c: Have to rewind 36228 bytes on render memblockq. > D: source.c: Processing rewind... > D: module-rtp-recv.c: Updating sample rate > D: module-rtp-recv.c: wi=8146486 ri=7902267 > D: module-rtp-recv.c: Write index deviates by 343.00 ms, expected > 500.00 ms D: module-rtp-recv.c: Updated sampling rate to 40690 Hz. > D: module-rtp-recv.c: Checking for dead streams ... > D: module-rtp-recv.c: Updating sample rate > D: module-rtp-recv.c: wi=13886477 ri=13267141 > D: module-rtp-recv.c: Write index deviates by 842.90 ms, expected > 500.00 ms D: module-rtp-recv.c: Updated sampling rate to 43714 Hz. > D: module-rtp-recv.c: Updating sample rate > D: module-rtp-recv.c: wi=18010641 ri=17327172 > D: module-rtp-recv.c: Write index deviates by 895.15 ms, expected > 500.00 ms D: module-rtp-recv.c: Updated sampling rate to 47199 Hz. > -------CUT------- > > If I start feeding any source to the sender instance, I get sound on > the receiver side, but it stutters and, as the debugging messages > say, plays at the "updated" samplerate. The samplerate comes closer > to ~70000 Hz in a couple of minutes. Both machines run identical > vanilla 2.6.29 kernels, I've switched to RT kernels and back on both > the sender and receiver with no difference. I've also tried using > different output sinks (JACK & ALSA) and different sound cards. The > machines are directly connected to each other via 100mbps LAN and > nothing disrupts the network. I desperately need to get this working > and sincerely hope the experts can help out or point me in the right > direction! > > Huge thanks in advance! > > Nickie > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at mail.0pointer.de > https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
