de nada... fue un placer... tambien aprendi algo... Saludos R Juan A Fuentes Bermudez wrote: > hi, very very thank you, > > now i am using the last configuration that you say me, now are 3 cards > actives, only the HDMI is not working via PA, > > i will trying coment and uncoment one to one devices, i am think that > HDMI device only have output not have input > > very very thank my friend > > you have a spanish jamon fron my :) > > > ----- Original Message ----- > > *From:* Richard Geddes <mailto:rich.geddes at verizon.net> > *To:* General PulseAudio Discussion > <mailto:pulseaudio-discuss at mail.0pointer.de> > *Sent:* Tuesday, June 03, 2008 10:24 PM > *Subject:* Re: [pulseaudio-discuss] Help in setting up PA... SOLVED > > ok... > > 1) The/var/log/messages indicates that you are running the pa > server as root (you say as well) and it also says the pa server is > not intended to be run as root... so you might want to change to a > regular user and use sudo for root related activities. > > 2) I think that the terjeta 3 requires some special parameters ... > similar to tarjeta 2. I'm not familiar with ice1724 device > driver, but you may want to try the same setup for tarjeta 3 as > for tarjeta 2. This is just a guess... anyone with knowledge > about how to setup an ice1724 source/sink in pa... please speak up > now... > > 3) Of course, it looks like tarjeta 3 was identified by the > module-detect/module-hal-detect. What we've done is disable this > and tried to set the sources/sinks manually. > module-detect/module-hal-detect seems to be an all or nothing > proposition... if anyone knows of a way to auto-detect specific > devices and manually set others in the same config file... please > speak up now. > > Well, you might want to try this (once again, a guess): > > a) re-enable the auto-detect - we know this will detect > tarjeta 0 and 3, and not tarjeta 1 and 2 > b) add only the manual configuration for tarjeta 2, after that > > > So your default.pa file would contain: > > ### Automatically load driver modules depending on the hardware > available > .ifexists module-hal-detect.so > load-module module-hal-detect > .else > ### Alternatively use the static hardware detection module (for > systems that > ### lack HAL support) > load-module module-detect > .endif > > # Load the devices: > #load-module module-alsa-sink sink_name=nvidia_out device=hw:0 > #load-module module-alsa-source source_name=nvidia_in device=hw:0 > > #load-module module-alsa-sink sink_name=hdmi_out device=hw:1 > #load-module module-alsa-source source_name=hdmi_in device=hw:1 > > load-module module-alsa-sink sink_name=ewx2496_out device=hw:2 > channels=10 > channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7 > load-module module-alsa-source source_name=ewx2496_in device=hw:2 > channels=12 > channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9 > > #load-module module-alsa-sink sink_name=e192m_out device=hw:3 > #load-module module-alsa-source source_name=e192m_in device=hw:3 > > # Select default device > #set-default-sink nvidia_out > #set-default-source nvidia_in > > Let's see if module-hal-detect/module-detect allows manual loading > of sources/sinks. > > > R > > Juan A Fuentes Bermudez wrote: >> hi, the problem is partial solved >> >> i an coment and paste the module taht you say my >> >> the pa server not start after reboot, >> >> i am coment and uncoment one to one, to discart waht is the card >> tthat cause problem , >> >> # Load the devices: >> load-module module-alsa-sink sink_name=nvidia_out device=hw:0 >> load-module module-alsa-source source_name=nvidia_in device=hw:0 >> >> #load-module module-alsa-sink sink_name=hdmi_out device=hw:1 >> #load-module module-alsa-source source_name=hdmi_in device=hw:1 >> >> load-module module-alsa-sink sink_name=ewx2496_out device=hw:2 >> channels=10 >> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7 >> load-module module-alsa-source source_name=ewx2496_in device=hw:2 >> channels=12 >> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9 >> >> #load-module module-alsa-sink sink_name=e192m_out device=hw:3 >> #load-module module-alsa-source source_name=e192m_in device=hw:3 >> in this mode, load pa server, and in the padevchooser apear the >> ewx2496 card :) very happy >> >> when un coment the e192 card, again pa server not start same when >> uncoment hdmi card >> >> i like active also e192 card, is posible? >> >> >> i am to paste this info, this is the first mail i want to send to >> list : >> >> hi, the server not start, always i am login as root >> >> can you test the information? >> >> >> # grep pulse /var/log/messages >> Jun 2 14:39:39 64-1 pulseaudio[6430]: main.c: This program is >> not intended to be run as root (unless --system is specified). >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 >> doesn't support 2 channels, changed to 10. >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 >> doesn't support sample format s16le, changed to s32le. >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find >> fallback mixer control "PCM". >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 >> doesn't support 2 channels, changed to 12. >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2 >> doesn't support sample format s16le, changed to s32le. >> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 2 17:33:48 64-1 pulseaudio[6428]: main.c: This program is >> not intended to be run as root (unless --system is specified). >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 >> doesn't support 2 channels, changed to 10. >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 >> doesn't support sample format s16le, changed to s32le. >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find >> fallback mixer control "PCM". >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 >> doesn't support 2 channels, changed to 12. >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0 >> doesn't support sample format s16le, changed to s32le. >> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 2 17:53:14 64-1 pulseaudio[6428]: module-x11-publish.c: >> PulseAudio information vanished from X11! >> Jun 3 00:37:48 64-1 pulseaudio[6479]: main.c: This program is >> not intended to be run as root (unless --system is specified). >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 >> doesn't support 2 channels, changed to 10. >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 >> doesn't support sample format s16le, changed to s32le. >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find >> fallback mixer control "PCM". >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 >> doesn't support 2 channels, changed to 12. >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2 >> doesn't support sample format s16le, changed to s32le. >> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 3 20:12:01 64-1 pulseaudio[6418]: main.c: This program is >> not intended to be run as root (unless --system is specified). >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device >> front:3 doesn't support sample format s16le, changed to s32le. >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 >> doesn't support 2 channels, changed to 10. >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 >> doesn't support sample format s16le, changed to s32le. >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find >> fallback mixer control "PCM". >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 >> doesn't support 2 channels, changed to 12. >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2 >> doesn't support sample format s16le, changed to s32le. >> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find >> fallback mixer control "Mic". >> Jun 3 20:25:33 64-1 pulseaudio[6445]: main.c: This program is >> not intended to be run as root (unless --sy >> >> >> >> >> >> >> >> >> this is my curent default.pa >> >> >> >> #!/usr/bin/pulseaudio -nF >> # >> # This file is part of PulseAudio. >> # >> # PulseAudio is free software; you can redistribute it and/or >> modify it >> # under the terms of the GNU Lesser General Public License as >> published by >> # the Free Software Foundation; either version 2 of the License, or >> # (at your option) any later version. >> # >> # PulseAudio is distributed in the hope that it will be useful, but >> # WITHOUT ANY WARRANTY; without even the implied warranty of >> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >> # General Public License for more details. >> # >> # You should have received a copy of the GNU Lesser General >> Public License >> # along with PulseAudio; if not, write to the Free Software >> Foundation, >> # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. >> >> .nofail >> >> ### Load something into the sample cache >> #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav >> load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav >> #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav >> #load-sample-lazy pulse-access /usr/share/sounds/generic.wav >> >> .fail >> >> ### Load audio drivers statically (it's probably better to not load >> ### these drivers manually, but instead use module-hal-detect -- >> ### see below -- for doing this automatically) >> #load-module module-alsa-sink >> #load-module module-alsa-source device=hw:1,0 >> #load-module module-oss device="/dev/dsp" sink_name=output >> source_name=input >> #load-module module-oss-mmap device="/dev/dsp" sink_name=output >> source_name=input >> #load-module module-null-sink >> #load-module module-pipe-sink >> >> ### Automatically load driver modules depending on the hardware >> available >> #.ifexists module-hal-detect.so >> #load-module module-hal-detect >> #.else >> ### Alternatively use the static hardware detection module (for >> systems that >> ### lack HAL support) >> #load-module module-detect >> #.endif >> >> # Load the devices: >> load-module module-alsa-sink sink_name=nvidia_out device=hw:0 >> load-module module-alsa-source source_name=nvidia_in device=hw:0 >> >> load-module module-alsa-sink sink_name=hdmi_out device=hw:1 >> load-module module-alsa-source source_name=hdmi_in device=hw:1 >> >> load-module module-alsa-sink sink_name=ewx2496_out device=hw:2 >> channels=10 >> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7 >> load-module module-alsa-source source_name=ewx2496_in device=hw:2 >> channels=12 >> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9 >> >> load-module module-alsa-sink sink_name=e192m_out device=hw:3 >> load-module module-alsa-source source_name=e192m_in device=hw:3 >> >> # Select default device >> set-default-sink nvidia_out >> set-default-source nvidia_in >> >> >> >> ## Load several protocols >> .ifexists module-esound-protocol-unix.so >> load-module module-esound-protocol-unix >> .endif >> load-module module-native-protocol-unix >> >> ### Network access (may be configured with paprefs, so leave this >> commented >> ### here if you plan to use paprefs) >> #load-module module-esound-protocol-tcp >> #load-module module-native-protocol-tcp >> #load-module module-zeroconf-publish >> >> ### Load the RTP reciever module (also configured via paprefs, >> see above) >> #load-module module-rtp-recv >> >> ### Load the RTP sender module (also configured via paprefs, see >> above) >> #load-module module-null-sink sink_name=rtp format=s16be >> channels=2 rate=44100 description="RTP Multicast Sink" >> #load-module module-rtp-send source=rtp.monitor >> >> ### Automatically restore the volume of playback streams >> load-module module-volume-restore >> >> ### Automatically restore the default sink/source when changed by >> the user during runtime >> load-module module-default-device-restore >> >> ### Automatically move streams to the default sink if the sink >> they are >> ### connected to dies, similar for sources >> load-module module-rescue-streams >> >> ### Automatically suspend sinks/sources that become idle for too long >> load-module module-suspend-on-idle >> >> ### Load X11 bell module >> #load-module module-x11-bell sample=x11-bell >> >> ### Register ourselves in the X11 session manager >> # Deactivated by default, to avoid deadlock when PA is started as >> esd from gnome-session >> # Instead we load this via /etc/xdg/autostart/ and "pactl >> load-module" now >> # load-module module-x11-xsmp >> >> ### Load additional modules from GConf settings. This can be >> configured with the paprefs tool. >> ### Please keep in mind that the modules configured by paprefs >> might conflict with manually >> ### loaded modules. >> .ifexists module-gconf.so >> .nofail >> load-module module-gconf >> .fail >> .endif >> >> ### Publish connection data in the X11 root window >> .ifexists module-x11-publish.so >> .nofail >> load-module module-x11-publish >> .fail >> .endif >> >> ### Make some devices default >> #set-default-sink output >> #set-default-source input >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> pulseaudio-discuss mailing list >> pulseaudio-discuss at mail.0pointer.de >> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss >> > > ------------------------------------------------------------------------ > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at mail.0pointer.de > https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss > > ------------------------------------------------------------------------ > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at mail.0pointer.de > https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20080603/b7dd6aed/attachment.htm>
