On Tue, 24.07.07 21:19, Jon Smirl (jonsmirl at gmail.com) wrote: > > On 7/24/07, Lennart Poettering <lennart at poettering.net> wrote: > > On Fri, 13.07.07 11:51, Jon Smirl (jonsmirl at gmail.com) wrote: > > > > > When I use HAL autodetect I see this and USB audio isn't working, the > > > sample rates are wrong from pulse and the audio is garbled. > > > > Hmm, does this work if you use plain aplay or similar? > > > > > If I load the pulse ALSA driver manually and add RATE=48000 CHANNELS=6 > > > pulse works properly. > > > > > > What's up with the duplicate network names? Do I have something > > > configured wrong in zero config? > > > > Seems you're loading every module twice? > > I have three audio devices, default.pa at bottom of message > motherboard in/out > USB audio in/out > webcam in It seems as if module-gconf initializes the native protocol module once, and you manually enabled that module a second time in the config file. if you enable the native protocol via the config file you should disable it in gconf. Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4
