On Sun, Mar 9, 2025 at 4:21 AM Antheas Kapenekakis <lkml@xxxxxxxxxxx> wrote: > > Currently, the driver does not adhere to the sysfs-class-hwmon > specification: 0 is used for auto fan control and 1 is used for manual > control. However, it is expected that 0 sets the fan to full speed, > 1 sets the fan to manual, and then 2 is used for automatic control. > > Therefore, change the sysfs API to reflect this and enable pwm on 2. > > As we are breaking the ABI for this driver, rename oxpec to oxp_ec, > reflecting the naming convention used by other drivers, to allow for > a smooth migration in current userspace programs. > > Closes: https://lore.kernel.org/linux-hwmon/20241027174836.8588-1-derekjohn.clark@xxxxxxxxx/ > Signed-off-by: Antheas Kapenekakis <lkml@xxxxxxxxxxx> > --- > drivers/platform/x86/oxpec.c | 37 ++++++++++++++++++++++++++++++++---- > 1 file changed, 33 insertions(+), 4 deletions(-) > > diff --git a/drivers/platform/x86/oxpec.c b/drivers/platform/x86/oxpec.c > index a06a7c54aa08..0b13baf190fe 100644 > --- a/drivers/platform/x86/oxpec.c > +++ b/drivers/platform/x86/oxpec.c > @@ -938,7 +938,27 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type, > case hwmon_pwm_input: > return oxp_pwm_input_read(val); > case hwmon_pwm_enable: > - return oxp_pwm_read(val); > + ret = oxp_pwm_read(val); > + if (ret) > + return ret; > + > + /* Check for auto and return 2 */ > + if (!*val) { > + *val = 2; > + return 0; > + } > + > + /* Return 0 if at full fan speed, 1 otherwise */ > + ret = oxp_pwm_fan_speed(val); > + if (ret) > + return ret; > + > + if (*val == 255) > + *val = 0; > + else > + *val = 1; > + > + return 0; > default: > break; > } > @@ -952,15 +972,24 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type, > static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type, > u32 attr, int channel, long val) > { > + int ret; > + > switch (type) { > case hwmon_pwm: > switch (attr) { > case hwmon_pwm_enable: > if (val == 1) > return oxp_pwm_enable(); > - else if (val == 0) > + else if (val == 2) > return oxp_pwm_disable(); > - return -EINVAL; > + else if (val != 0) > + return -EINVAL; > + > + /* Enable PWM and set to max speed */ > + ret = oxp_pwm_enable(); > + if (ret) > + return ret; > + return oxp_pwm_input_write(255); > case hwmon_pwm_input: > return oxp_pwm_input_write(val); > default: > @@ -1025,7 +1054,7 @@ static int oxp_platform_probe(struct platform_device *pdev) > struct device *dev = &pdev->dev; > struct device *hwdev; > > - hwdev = devm_hwmon_device_register_with_info(dev, "oxpec", NULL, > + hwdev = devm_hwmon_device_register_with_info(dev, "oxp_ec", NULL, > &oxp_ec_chip_info, NULL); > > if (charge_behaviour_supported()) > -- > 2.48.1 > Reviewed-by: Derek J. Clark <derekjohn.clark@xxxxxxxxx>
