The X1 and X1 mini lineups feature an LED nested within their turbo
button. When turbo takeover is not enabled, the turbo button allows
the device to switch from 18W to 25W TDP. When the device is in the
25W TDP mode, the LED is turned on.
However, when we engage turbo takeover, the turbo led remains on its
last state, which might be illuminated and cannot be currently
controlled. Therefore, add the register that controls it under sysfs,
to allow userspace to turn it off once engaging turbo takeover and
then control it as they wish.
2024 OneXPlayer devices, other than the X1s, do not have a turbo LED.
However, earlier models do, so this can be extended to them as well
when the register for it is found.
Signed-off-by: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
---
drivers/platform/x86/oxpec.c | 84 ++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/platform/x86/oxpec.c b/drivers/platform/x86/oxpec.c
index 9cb024325da5..eb7eafebbd37 100644
--- a/drivers/platform/x86/oxpec.c
+++ b/drivers/platform/x86/oxpec.c
@@ -106,6 +106,12 @@ static enum oxp_board board;
#define OXP_X1_CHARGE_BYPASS_MASK_ALWAYS (OXP_X1_CHARGE_BYPASS_MASK_S0 | \
OXP_X1_CHARGE_BYPASS_MASK_S3S5)
+/* X1 Turbo LED */
+#define OXP_X1_TURBO_LED_REG 0x57
+
+#define OXP_X1_TURBO_LED_OFF 0x01
+#define OXP_X1_TURBO_LED_ON 0x02
+
static const struct dmi_system_id dmi_table[] = {
{
.matches = {
@@ -453,6 +459,73 @@ static ssize_t tt_toggle_show(struct device *dev,
static DEVICE_ATTR_RW(tt_toggle);
+/* Callbacks for turbo toggle attribute */
+static umode_t tt_led_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ switch (board) {
+ case oxp_x1:
+ return attr->mode;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static ssize_t tt_led_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ u8 reg, val;
+ int rval;
+ bool value;
+
+ rval = kstrtobool(buf, &value);
+ if (rval)
+ return rval;
+
+ switch (board) {
+ case oxp_x1:
+ reg = OXP_X1_TURBO_LED_REG;
+ val = value ? OXP_X1_TURBO_LED_ON : OXP_X1_TURBO_LED_OFF;
+ break;
+ default:
+ return -EINVAL;
+ }
+ rval = write_to_ec(reg, val);
+
+ if (rval)
+ return rval;
+
+ return count;
+}
+
+static ssize_t tt_led_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int retval;
+ u8 reg;
+ long enval;
+ long val;
+
+ switch (board) {
+ case oxp_x1:
+ reg = OXP_X1_TURBO_LED_REG;
+ enval = OXP_X1_TURBO_LED_ON;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ retval = read_from_ec(reg, 1, &val);
+ if (retval)
+ return retval;
+
+ return sysfs_emit(buf, "%d\n", val == enval);
+}
+
+static DEVICE_ATTR_RW(tt_led);
+
/* Callbacks for turbo toggle attribute */
static bool charge_behaviour_supported(void)
{
@@ -898,8 +971,19 @@ static struct attribute_group oxp_tt_toggle_attribute_group = {
.attrs = oxp_tt_toggle_attrs,
};
+static struct attribute *oxp_tt_led_attrs[] = {
+ &dev_attr_tt_led.attr,
+ NULL
+};
+
+static struct attribute_group oxp_tt_led_attribute_group = {
+ .is_visible = tt_led_is_visible,
+ .attrs = oxp_tt_led_attrs,
+};
+
static const struct attribute_group *oxp_ec_groups[] = {
&oxp_tt_toggle_attribute_group,
+ &oxp_tt_led_attribute_group,
NULL
};
--
2.48.1
