Get and store the AWCC system description in alienware_awcc_setup()
instead of awcc_platform_profile_probe() and add a check for integer
overflows to avoid misbehaviors.
Signed-off-by: Kurt Borja <kuurtb@xxxxxxxxx>
---
.../platform/x86/dell/alienware-wmi-wmax.c | 56 ++++++++++++++-----
1 file changed, 43 insertions(+), 13 deletions(-)
diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
index 4a8335d90b5d..e8fe16da036a 100644
--- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
+++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
@@ -12,6 +12,7 @@
#include <linux/bits.h>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
+#include <linux/overflow.h>
#include <linux/platform_profile.h>
#include <linux/wmi.h>
#include "alienware-wmi.h"
@@ -211,6 +212,17 @@ struct wmax_u32_args {
struct awcc_priv {
struct wmi_device *wdev;
+ union {
+ u32 system_description;
+ struct {
+ u8 fan_count;
+ u8 temp_count;
+ u8 unknown_count;
+ u8 profile_count;
+ } __packed;
+ u8 res_count[4];
+ } __packed;
+
struct device *ppdev;
u8 supported_profiles[PLATFORM_PROFILE_LAST];
};
@@ -614,32 +626,35 @@ static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices)
enum platform_profile_option profile;
struct awcc_priv *priv = drvdata;
enum awcc_thermal_profile mode;
- u8 sys_desc[4];
- u32 first_mode;
+ u8 id, offset = 0;
u32 out_data;
int ret;
- u8 id;
-
- ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
- 0, (u32 *) &sys_desc);
- if (ret < 0)
- return ret;
-
- first_mode = sys_desc[0] + sys_desc[1];
- for (u32 i = 0; i < sys_desc[3]; i++) {
- ret = awcc_op_get_resource_id(priv->wdev, i + first_mode, &out_data);
+ /*
+ * Thermal profile IDs are listed last at offset
+ * fan_count + temp_count + unknown_count
+ */
+ for (u32 i = 0; i < ARRAY_SIZE(priv->res_count) - 1; i++)
+ offset += priv->res_count[i];
+ for (u32 i = 0; i < priv->profile_count; i++) {
+ ret = awcc_op_get_resource_id(priv->wdev, i + offset, &out_data);
if (ret == -EIO)
return ret;
+ /*
+ * Some devices report an incorrect number of thermal profiles
+ * so the resource ID list may end prematurely
+ */
if (ret == -EBADRQC)
break;
/* Some IDs have a BIT(8) flag that should be ignored */
id = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data);
- if (!is_awcc_thermal_profile_id(id))
+ if (!is_awcc_thermal_profile_id(id)) {
+ dev_dbg(&priv->wdev->dev, "Unmapped thermal profile ID 0x%02x\n", id);
continue;
+ }
mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id);
profile = awcc_mode_to_platform_profile[mode];
@@ -680,12 +695,27 @@ static int awcc_platform_profile_init(struct wmi_device *wdev)
static int alienware_awcc_setup(struct wmi_device *wdev)
{
struct awcc_priv *priv;
+ u8 tot = 0;
int ret;
priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ ret = awcc_thermal_information(wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION,
+ 0, &priv->system_description);
+ if (ret < 0)
+ return ret;
+
+ /* Sanity check */
+ for (u32 i = 0; i < ARRAY_SIZE(priv->res_count); i++) {
+ if (check_add_overflow(tot, priv->res_count[i], &tot)) {
+ dev_err(&wdev->dev, "Malformed system description: %u\n",
+ priv->system_description);
+ return -ENXIO;
+ }
+ }
+
priv->wdev = wdev;
dev_set_drvdata(&wdev->dev, priv);
--
2.48.1
