SerDes will configure according to the provided interface mode after
finish a major reconfiguration of the interface mode.
Signed-off-by: Choong Yong Liang <yong.liang.choong@xxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d04543e5697b..56efc475e51c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1124,6 +1124,18 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
return 0;
}
+static int stmmac_mac_finish(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct net_device *ndev = to_net_dev(config->dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ if (priv->plat->config_serdes)
+ priv->plat->config_serdes(ndev, priv->plat->bsp_priv, interface);
+
+ return 0;
+}
+
static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
.mac_get_caps = stmmac_mac_get_caps,
.mac_select_pcs = stmmac_mac_select_pcs,
@@ -1132,6 +1144,7 @@ static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
.mac_link_up = stmmac_mac_link_up,
.mac_disable_tx_lpi = stmmac_mac_disable_tx_lpi,
.mac_enable_tx_lpi = stmmac_mac_enable_tx_lpi,
+ .mac_finish = stmmac_mac_finish,
};
/**
--
2.34.1
