The UART used for the Bluetooth HCI on the Vexia EDU ATLA 10 is enumerated
as a PCI device, but the ODBA7823 ACPI fwnode for the HCI expects it to
use the more standard ACPI enumeration mode.
So Bluetooth does not work out of the box. Add x86_serdev_info to make
the x86-android-tablets manually associate the fwnode with the UART.
Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/platform/x86/x86-android-tablets/other.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index f5140d5ce61a..2157dd8c9aad 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -715,6 +715,14 @@ static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initcon
}
};
+static const struct x86_serdev_info vexia_edu_atla10_serdevs[] __initconst = {
+ {
+ .ctrl.pci.devfn = PCI_DEVFN(0x1e, 3),
+ .ctrl_devname = "serial0",
+ .serdev_hid = "OBDA8723",
+ },
+};
+
static struct gpiod_lookup_table vexia_edu_atla10_ft5416_gpios = {
.dev_id = "i2c-FTSC1000",
.table = {
@@ -755,6 +763,8 @@ static int __init vexia_edu_atla10_init(struct device *dev)
const struct x86_dev_info vexia_edu_atla10_info __initconst = {
.i2c_client_info = vexia_edu_atla10_i2c_clients,
.i2c_client_count = ARRAY_SIZE(vexia_edu_atla10_i2c_clients),
+ .serdev_info = vexia_edu_atla10_serdevs,
+ .serdev_count = ARRAY_SIZE(vexia_edu_atla10_serdevs),
.gpiod_lookup_tables = vexia_edu_atla10_gpios,
.init = vexia_edu_atla10_init,
.use_pci = true,
--
2.47.0
