Since S2D (Spill to DRAM) uses different message port offsets compared to
PMC message offsets for communication with PMFW, relocate the S2D macros
from pmc.c to a new file, mp1_stb.c, for better code organization.
Following this change, it is logical to introduce a new structure,
"struct stb_arg," to pass the message, argument, and response offset
details to PMFW via the amd_pmc_send_cmd() call. Additionally, move the
s2d_msg_id member from amd_pmc_dev into the new structure.
Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Co-developed-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
Signed-off-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
---
drivers/platform/x86/amd/pmc/mp1_stb.c | 33 +++++++++++++++++---------
drivers/platform/x86/amd/pmc/pmc.c | 17 +++++--------
drivers/platform/x86/amd/pmc/pmc.h | 9 ++++++-
3 files changed, 36 insertions(+), 23 deletions(-)
diff --git a/drivers/platform/x86/amd/pmc/mp1_stb.c b/drivers/platform/x86/amd/pmc/mp1_stb.c
index fd7ca1626cfe..38729c9b205a 100644
--- a/drivers/platform/x86/amd/pmc/mp1_stb.c
+++ b/drivers/platform/x86/amd/pmc/mp1_stb.c
@@ -31,6 +31,11 @@
#define STB_FORCE_FLUSH_DATA 0xCF
#define FIFO_SIZE 4096
+/* STB S2D(Spill to DRAM) has different message port offset */
+#define AMD_S2D_REGISTER_MESSAGE 0xA20
+#define AMD_S2D_REGISTER_RESPONSE 0xA80
+#define AMD_S2D_REGISTER_ARGUMENT 0xA88
+
static bool enable_stb;
module_param(enable_stb, bool, 0644);
MODULE_PARM_DESC(enable_stb, "Enable the STB debug mechanism");
@@ -175,7 +180,7 @@ static int amd_stb_debugfs_open_v2(struct inode *inode, struct file *filp)
return amd_stb_handle_efr(filp);
/* Get the num_samples to calculate the last push location */
- ret = amd_pmc_send_cmd(dev, S2D_NUM_SAMPLES, &num_samples, dev->s2d_msg_id, true);
+ ret = amd_pmc_send_cmd(dev, S2D_NUM_SAMPLES, &num_samples, dev->stb_arg.s2d_msg_id, true);
/* Clear msg_port for other SMU operation */
dev->msg_port = MSG_PORT_PMC;
if (ret) {
@@ -238,18 +243,24 @@ static bool amd_is_stb_supported(struct amd_pmc_dev *dev)
switch (dev->cpu_id) {
case AMD_CPU_ID_YC:
case AMD_CPU_ID_CB:
- dev->s2d_msg_id = 0xBE;
- return true;
+ dev->stb_arg.s2d_msg_id = 0xBE;
+ break;
case AMD_CPU_ID_PS:
- dev->s2d_msg_id = 0x85;
- return true;
+ dev->stb_arg.s2d_msg_id = 0x85;
+ break;
case PCI_DEVICE_ID_AMD_1AH_M20H_ROOT:
case PCI_DEVICE_ID_AMD_1AH_M60H_ROOT:
- dev->s2d_msg_id = 0xDE;
- return true;
+ dev->stb_arg.s2d_msg_id = 0xDE;
+ break;
default:
return false;
}
+
+ dev->stb_arg.msg = AMD_S2D_REGISTER_MESSAGE;
+ dev->stb_arg.arg = AMD_S2D_REGISTER_ARGUMENT;
+ dev->stb_arg.resp = AMD_S2D_REGISTER_RESPONSE;
+
+ return true;
}
int amd_stb_s2d_init(struct amd_pmc_dev *dev)
@@ -274,18 +285,18 @@ int amd_stb_s2d_init(struct amd_pmc_dev *dev)
/* Spill to DRAM feature uses separate SMU message port */
dev->msg_port = MSG_PORT_S2D;
- amd_pmc_send_cmd(dev, S2D_TELEMETRY_SIZE, &size, dev->s2d_msg_id, true);
+ amd_pmc_send_cmd(dev, S2D_TELEMETRY_SIZE, &size, dev->stb_arg.s2d_msg_id, true);
if (size != S2D_TELEMETRY_BYTES_MAX)
return -EIO;
/* Get DRAM size */
- ret = amd_pmc_send_cmd(dev, S2D_DRAM_SIZE, &dev->dram_size, dev->s2d_msg_id, true);
+ ret = amd_pmc_send_cmd(dev, S2D_DRAM_SIZE, &dev->dram_size, dev->stb_arg.s2d_msg_id, true);
if (ret || !dev->dram_size)
dev->dram_size = S2D_TELEMETRY_DRAMBYTES_MAX;
/* Get STB DRAM address */
- amd_pmc_send_cmd(dev, S2D_PHYS_ADDR_LOW, &phys_addr_low, dev->s2d_msg_id, true);
- amd_pmc_send_cmd(dev, S2D_PHYS_ADDR_HIGH, &phys_addr_hi, dev->s2d_msg_id, true);
+ amd_pmc_send_cmd(dev, S2D_PHYS_ADDR_LOW, &phys_addr_low, dev->stb_arg.s2d_msg_id, true);
+ amd_pmc_send_cmd(dev, S2D_PHYS_ADDR_HIGH, &phys_addr_hi, dev->stb_arg.s2d_msg_id, true);
stb_phys_addr = ((u64)phys_addr_hi << 32 | phys_addr_low);
diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c
index 7726a05091a5..90a7983d510f 100644
--- a/drivers/platform/x86/amd/pmc/pmc.c
+++ b/drivers/platform/x86/amd/pmc/pmc.c
@@ -44,11 +44,6 @@
#define AMD_PMC_STB_S2IDLE_RESTORE 0xC6000002
#define AMD_PMC_STB_S2IDLE_CHECK 0xC6000003
-/* STB S2D(Spill to DRAM) has different message port offset */
-#define AMD_S2D_REGISTER_MESSAGE 0xA20
-#define AMD_S2D_REGISTER_RESPONSE 0xA80
-#define AMD_S2D_REGISTER_ARGUMENT 0xA88
-
/* Base address of SMU for mapping physical address to virtual address */
#define AMD_PMC_MAPPING_SIZE 0x01000
#define AMD_PMC_BASE_ADDR_OFFSET 0x10000
@@ -454,9 +449,9 @@ static void amd_pmc_dump_registers(struct amd_pmc_dev *dev)
u32 value, message, argument, response;
if (dev->msg_port) {
- message = AMD_S2D_REGISTER_MESSAGE;
- argument = AMD_S2D_REGISTER_ARGUMENT;
- response = AMD_S2D_REGISTER_RESPONSE;
+ message = dev->stb_arg.msg;
+ argument = dev->stb_arg.arg;
+ response = dev->stb_arg.resp;
} else {
message = dev->smu_msg;
argument = AMD_PMC_REGISTER_ARGUMENT;
@@ -481,9 +476,9 @@ int amd_pmc_send_cmd(struct amd_pmc_dev *dev, u32 arg, u32 *data, u8 msg, bool r
mutex_lock(&dev->lock);
if (dev->msg_port) {
- message = AMD_S2D_REGISTER_MESSAGE;
- argument = AMD_S2D_REGISTER_ARGUMENT;
- response = AMD_S2D_REGISTER_RESPONSE;
+ message = dev->stb_arg.msg;
+ argument = dev->stb_arg.arg;
+ response = dev->stb_arg.resp;
} else {
message = dev->smu_msg;
argument = AMD_PMC_REGISTER_ARGUMENT;
diff --git a/drivers/platform/x86/amd/pmc/pmc.h b/drivers/platform/x86/amd/pmc/pmc.h
index 188284feca72..be3e6b35433c 100644
--- a/drivers/platform/x86/amd/pmc/pmc.h
+++ b/drivers/platform/x86/amd/pmc/pmc.h
@@ -25,6 +25,13 @@ struct amd_mp2_dev {
bool is_stb_data;
};
+struct stb_arg {
+ u32 s2d_msg_id;
+ u32 msg;
+ u32 arg;
+ u32 resp;
+};
+
struct amd_pmc_dev {
void __iomem *regbase;
void __iomem *smu_virt_addr;
@@ -36,7 +43,6 @@ struct amd_pmc_dev {
u32 active_ips;
u32 dram_size;
u32 num_ips;
- u32 s2d_msg_id;
u32 smu_msg;
/* SMU version information */
u8 smu_program;
@@ -50,6 +56,7 @@ struct amd_pmc_dev {
struct quirk_entry *quirks;
bool disable_8042_wakeup;
struct amd_mp2_dev *mp2;
+ struct stb_arg stb_arg;
};
void amd_pmc_process_restore_quirks(struct amd_pmc_dev *dev);
--
2.34.1
