To distinguish between the PMC message port and the S2D (Spill to DRAM)
message port, replace the use of 0 and 1 with an enum.
Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Co-developed-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
Signed-off-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
---
drivers/platform/x86/amd/pmc/mp1_stb.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/amd/pmc/mp1_stb.c b/drivers/platform/x86/amd/pmc/mp1_stb.c
index 5efec020ecac..2b06861c479b 100644
--- a/drivers/platform/x86/amd/pmc/mp1_stb.c
+++ b/drivers/platform/x86/amd/pmc/mp1_stb.c
@@ -47,6 +47,11 @@ enum s2d_arg {
S2D_DRAM_SIZE,
};
+enum s2d_msg_port {
+ MSG_PORT_PMC,
+ MSG_PORT_S2D,
+};
+
struct amd_stb_v2_data {
size_t size;
u8 data[] __counted_by(size);
@@ -156,7 +161,7 @@ static int amd_stb_debugfs_open_v2(struct inode *inode, struct file *filp)
dev_err(dev->dev, "error writing to STB: %d\n", ret);
/* Spill to DRAM num_samples uses separate SMU message port */
- dev->msg_port = 1;
+ dev->msg_port = MSG_PORT_S2D;
ret = amd_pmc_send_cmd(dev, 0, &val, STB_FORCE_FLUSH_DATA, 1);
if (ret)
@@ -173,7 +178,7 @@ static int amd_stb_debugfs_open_v2(struct inode *inode, struct file *filp)
/* Get the num_samples to calculate the last push location */
ret = amd_pmc_send_cmd(dev, S2D_NUM_SAMPLES, &num_samples, dev->s2d_msg_id, true);
/* Clear msg_port for other SMU operation */
- dev->msg_port = 0;
+ dev->msg_port = MSG_PORT_PMC;
if (ret) {
dev_err(dev->dev, "error: S2D_NUM_SAMPLES not supported : %d\n", ret);
return ret;
@@ -266,7 +271,7 @@ int amd_s2d_init(struct amd_pmc_dev *dev)
&amd_stb_debugfs_fops);
/* Spill to DRAM feature uses separate SMU message port */
- dev->msg_port = 1;
+ dev->msg_port = MSG_PORT_S2D;
amd_pmc_send_cmd(dev, S2D_TELEMETRY_SIZE, &size, dev->s2d_msg_id, true);
if (size != S2D_TELEMETRY_BYTES_MAX)
@@ -284,7 +289,7 @@ int amd_s2d_init(struct amd_pmc_dev *dev)
stb_phys_addr = ((u64)phys_addr_hi << 32 | phys_addr_low);
/* Clear msg_port for other SMU operation */
- dev->msg_port = 0;
+ dev->msg_port = MSG_PORT_PMC;
dev->stb_virt_addr = devm_ioremap(dev->dev, stb_phys_addr, dev->dram_size);
if (!dev->stb_virt_addr)
--
2.34.1
