Am 26.10.24 um 12:30 schrieb Hans de Goede:
Hi Mario, On 25-Oct-24 9:30 PM, Mario Limonciello wrote:Multiple drivers may attempt to register platform profile handlers, but only one may be registered and the behavior is non-deterministic for which one wins. It's mostly controlled by probing order. This can be problematic if one driver changes CPU settings and another driver notifies the EC for changing fan curves. Modify the ACPI platform profile handler to let multiple drivers register platform profile handlers and abstract this detail from userspace. From userspace perspective the user will see profiles available across both drivers. However to avoid chaos only allow changing to profiles that are common in both drivers. If any problems occur when changing profiles for any driver, then revert back to the previous profile. Tested-by: Matthew Schwartz <matthew.schwartz@xxxxxxxxx> Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> --- drivers/acpi/platform_profile.c | 203 ++++++++++++++++++-------------- 1 file changed, 117 insertions(+), 86 deletions(-) diff --git a/drivers/acpi/platform_profile.c b/drivers/acpi/platform_profile.c index 091ca6941a925..915e3c49f0b5f 100644 --- a/drivers/acpi/platform_profile.c +++ b/drivers/acpi/platform_profile.c @@ -9,7 +9,6 @@ #include <linux/platform_profile.h> #include <linux/sysfs.h> -static struct platform_profile_handler *cur_profile; static LIST_HEAD(platform_profile_handler_list); static DEFINE_MUTEX(profile_lock); @@ -36,26 +35,26 @@ static ssize_t platform_profile_choices_show(struct device *dev, struct device_attribute *attr, char *buf) { + struct platform_profile_handler *handler; + unsigned long seen = 0; int len = 0; - int err, i; - - err = mutex_lock_interruptible(&profile_lock); - if (err) - return err; - - if (!cur_profile) { - mutex_unlock(&profile_lock); - return -ENODEV; + int i; + + scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &profile_lock) { + list_for_each_entry(handler, &platform_profile_handler_list, list) { + for_each_set_bit(i, handler->choices, PLATFORM_PROFILE_LAST) { + if (seen & BIT(i)) + continue; + if (len == 0) + len += sysfs_emit_at(buf, len, "%s", profile_names[i]); + else + len += sysfs_emit_at(buf, len, " %s", profile_names[i]); + seen |= BIT(i); + } + } }Since only choices that are available in all registered handlers will be accepted, should the output not be limited to only those choices ? E.g.: unsigned long choices = 0; bool first = true; scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &profile_lock) { list_for_each_entry(handler, &platform_profile_handler_list, list) { if (first) { choices = handler->choices; first = false; } else { choices &= handler->choices; } } } for_each_set_bit(i, choices, PLATFORM_PROFILE_LAST) { if (len == 0) len += sysfs_emit_at(buf, len, "%s", profile_names[i]); else len += sysfs_emit_at(buf, len, " %s", profile_names[i]); } len += sysfs_emit_at(buf, len, "\n"); return len; } ? Also this means that choices can change now as drivers get loaded / removed. I believe that power-profiles-daemon matches has some hotplug handling for the sysfs files showing up? How would that work with choices changing ? Or am I misremembering and does p-p-d simply assume all drivers are loaded when it starts ?
After a quick glance at the source code i think it basically assumes that the sysfs file is present during startup if platform profiles are supported. If the sysfs file disappears afterwards, the code will simply return an error. For handling changing choices, sending a poll notification using sysfs_notify() to the choices file will be the easiest solution.
@@ -64,22 +63,20 @@ static ssize_t platform_profile_show(struct device *dev, char *buf) { enum platform_profile_option profile = PLATFORM_PROFILE_BALANCED; + struct platform_profile_handler *handler; int err; - err = mutex_lock_interruptible(&profile_lock); - if (err) - return err; - if (!cur_profile) { - mutex_unlock(&profile_lock); - return -ENODEV; + scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &profile_lock) { + if (!platform_profile_is_registered()) + return -ENODEV; + list_for_each_entry(handler, &platform_profile_handler_list, list) { + err = handler->profile_get(handler, &profile); + if (err) + return err; + } }Hmm this just goes with the platform returned by the last handler called ? Maybe compare results and log some warning if there are different results between handlers ? And maybe also: 1. New patch enforcing that all handlers must support plain balanced at registration time. 2. Check that all handlers agree when a new handler gets registered and if not then force all handlers to balanced, together with a sysfs_notify() ?
I begin to wonder why we even need the profile_get callback anyway. The drivers are already required to: "NOT ... let userspace know about any sub-optimal conditions which are impeding reaching the requested performance level." So what exactly is the reason to read the platform profile from hardware?
- err = cur_profile->profile_get(cur_profile, &profile); - mutex_unlock(&profile_lock); - if (err) - return err; - /* Check that profile is valid index */ if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names)))) return -EIO; @@ -91,37 +88,48 @@ static ssize_t platform_profile_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct platform_profile_handler *handler; + enum platform_profile_option profile; int err, i; - err = mutex_lock_interruptible(&profile_lock); - if (err) - return err; - - if (!cur_profile) { - mutex_unlock(&profile_lock); - return -ENODEV; - } - /* Scan for a matching profile */ i = sysfs_match_string(profile_names, buf); if (i < 0) { - mutex_unlock(&profile_lock); return -EINVAL; } - /* Check that platform supports this profile choice */ - if (!test_bit(i, cur_profile->choices)) { - mutex_unlock(&profile_lock); - return -EOPNOTSUPP; + scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &profile_lock) { + if (!platform_profile_is_registered()) + return -ENODEV; + + /* Check that all handlers support this profile choice */ + list_for_each_entry(handler, &platform_profile_handler_list, list) { + if (!test_bit(i, handler->choices)) + return -EOPNOTSUPP; + + /* save the profile so that it can be reverted if necessary */ + err = handler->profile_get(handler, &profile); + if (err) + return err; + }Same issue as before, you are only saving the profile of the last handler called here, which might even be a profile not supported by all handlers... Might be easiest to just enforce all handlers support plain balanced as I suggested above and then on errors revert all handlers to balanced. This may seem like it is not nice to do, but errors should not happen so I think this is ok. And if errors do happen then we need to fix the errors :)+ + list_for_each_entry(handler, &platform_profile_handler_list, list) { + err = handler->profile_set(handler, i); + if (err) { + pr_err("Failed to set profile for handler %s\n", handler->name); + break; + } + } + if (err) { + list_for_each_entry_continue_reverse(handler, &platform_profile_handler_list, list) { + if (handler->profile_set(handler, profile)) + pr_err("Failed to revert profile for handler %s\n", handler->name); + } + return err; + } } - err = cur_profile->profile_set(cur_profile, i); - if (!err) - sysfs_notify(acpi_kobj, NULL, "platform_profile"); - - mutex_unlock(&profile_lock); - if (err) - return err; + sysfs_notify(acpi_kobj, NULL, "platform_profile"); return count; } @@ -140,7 +148,8 @@ static const struct attribute_group platform_profile_group = { void platform_profile_notify(void) { - if (!cur_profile) + guard(mutex)(&profile_lock); + if (!platform_profile_is_registered()) return; sysfs_notify(acpi_kobj, NULL, "platform_profile"); } @@ -148,40 +157,65 @@ EXPORT_SYMBOL_GPL(platform_profile_notify); int platform_profile_cycle(void) { + struct platform_profile_handler *handler; enum platform_profile_option profile; - enum platform_profile_option next; + enum platform_profile_option next = PLATFORM_PROFILE_LAST; + enum platform_profile_option next2 = PLATFORM_PROFILE_LAST; int err; - err = mutex_lock_interruptible(&profile_lock); - if (err) - return err; - - if (!cur_profile) { - mutex_unlock(&profile_lock); - return -ENODEV; - } - - err = cur_profile->profile_get(cur_profile, &profile); - if (err) { - mutex_unlock(&profile_lock); - return err; - } - - next = find_next_bit_wrap(cur_profile->choices, PLATFORM_PROFILE_LAST, - profile + 1); - - if (WARN_ON(next == PLATFORM_PROFILE_LAST)) { - mutex_unlock(&profile_lock); - return -EINVAL; + scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &profile_lock) { + /* first pass, make sure all handlers agree on the definition of "next" profile */ + list_for_each_entry(handler, &platform_profile_handler_list, list) { + + err = handler->profile_get(handler, &profile); + if (err) + return err; + + if (next == PLATFORM_PROFILE_LAST) + next = find_next_bit_wrap(handler->choices, + PLATFORM_PROFILE_LAST, + profile + 1); + else + next2 = find_next_bit_wrap(handler->choices, + PLATFORM_PROFILE_LAST, + profile + 1); + + if (WARN_ON(next == PLATFORM_PROFILE_LAST)) + return -EINVAL; + + if (next2 == PLATFORM_PROFILE_LAST) + continue; + + if (next != next2) { + pr_warn("Next profile to cycle to is ambiguous between platform_profile handlers\n"); + return -EINVAL; + } + next = next2; + }Hmm, this seems complicated, I would suggest to factor out the code to "and" together all the handler's choices which I suggested above for platform_profile_choices_show() into a helper (with the locking to be done by the caller) and then call that helper here to get a choices which is the result if all the choices and-ed together and simply call find_next_bit_wrap() on the resulting and-ed value ? Ah I guess another issue is that the handlers may also differ on which profile they return from handler->profile_get(), so same issue as in platform_profile_show(). I think this requires another factored out helper to get a single consistent profile value for all handlers. Then this helper can be used both in platform_profile_show() and here to get a "truth" value for the current active profile and show that / use that as base to pick the next value. Note the above approach definitely is going to have issues if handlers mismatch on which profiles are supported since you do not skip choices which are only available in one of the handlers.+ + /* + * Second pass: apply "next" to each handler + * If any failures occur unwind and revert all back to the original profile + */ + list_for_each_entry(handler, &platform_profile_handler_list, list) { + err = handler->profile_set(handler, next); + if (err) { + pr_err("Failed to set profile for handler %s\n", handler->name); + break; + } + } + if (err) { + list_for_each_entry_continue_reverse(handler, &platform_profile_handler_list, list) { + err = handler->profile_set(handler, profile);Same issue as before, profile contains the profile of the last handler in the list only.+ if (err) + pr_err("Failed to revert profile for handler %s\n", handler->name); + } + } } - err = cur_profile->profile_set(cur_profile, next); - mutex_unlock(&profile_lock); - - if (!err) - sysfs_notify(acpi_kobj, NULL, "platform_profile"); + sysfs_notify(acpi_kobj, NULL, "platform_profile"); - return err; + return 0; } EXPORT_SYMBOL_GPL(platform_profile_cycle); @@ -190,21 +224,19 @@ int platform_profile_register(struct platform_profile_handler *pprof) int err; guard(mutex)(&profile_lock); - /* We can only have one active profile */ - if (cur_profile) - return -EEXIST; /* Sanity check the profile handler field are set */ if (!pprof || bitmap_empty(pprof->choices, PLATFORM_PROFILE_LAST) || !pprof->profile_set || !pprof->profile_get) return -EINVAL; - err = sysfs_create_group(acpi_kobj, &platform_profile_group); - if (err) - return err; + if (!platform_profile_is_registered()) { + err = sysfs_create_group(acpi_kobj, &platform_profile_group); + if (err) + return err; + } list_add_tail(&pprof->list, &platform_profile_handler_list); - cur_profile = pprof; return 0; } EXPORT_SYMBOL_GPL(platform_profile_register); @@ -215,7 +247,6 @@ int platform_profile_remove(struct platform_profile_handler *pprof) list_del(&pprof->list); - cur_profile = NULL; if (!platform_profile_is_registered()) sysfs_remove_group(acpi_kobj, &platform_profile_group);Regards, Hans
