Add support for the Vexia EDU ATLA 10 tablet, Android 4.2/4.4 + Guadalinex
Ubuntu tablet distributed to schools in the Spanish Andalucía region.
Besides the usual broken DSDT issues this tablet is special because all
its LPSS island peripherals are enumerated as PCI devices rather then as
ACPI devices as they typically are.
At the same time there are disabled (_STA=0) ACPI devices for
the peripherals and child ACPI devices for e.g. attached I2C/SDIO devices
are children of these disabled ACPI devices and thus will not be used
by Linux since the parent is disabled.
So besides the usual manual i2c-client instantiation for accel/touchscreen
this tablet also requires manual i2c-client instantiation for the codec
and for the PMIC.
Also it seems the mainboard was designed for Windows not Android, so
it has an I2C attached embedded controller instead of allowing direct
access to the charger + fuel-gauge chips as is usual with Android boards.
Normally when there is an embedded controller, there also is ACPI battery
support, but since this shipped with Android that is missing and Linux
needs to have a power_supply class driver talking directly to the EC.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../platform/x86/x86-android-tablets/Kconfig | 1 +
.../platform/x86/x86-android-tablets/dmi.c | 10 ++
.../platform/x86/x86-android-tablets/other.c | 165 ++++++++++++++++++
.../x86-android-tablets/x86-android-tablets.h | 1 +
4 files changed, 177 insertions(+)
diff --git a/drivers/platform/x86/x86-android-tablets/Kconfig b/drivers/platform/x86/x86-android-tablets/Kconfig
index 88d9e8f2ff24..2267d8362020 100644
--- a/drivers/platform/x86/x86-android-tablets/Kconfig
+++ b/drivers/platform/x86/x86-android-tablets/Kconfig
@@ -6,6 +6,7 @@
config X86_ANDROID_TABLETS
tristate "X86 Android tablet support"
depends on I2C && SPI && SERIAL_DEV_BUS && ACPI && EFI && GPIOLIB && PMIC_OPREGION
+ depends on PCI
select NEW_LEDS
select LEDS_CLASS
help
diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c
index 17f6da96aa01..f1e8428c98d8 100644
--- a/drivers/platform/x86/x86-android-tablets/dmi.c
+++ b/drivers/platform/x86/x86-android-tablets/dmi.c
@@ -189,6 +189,16 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
},
.driver_data = (void *)&whitelabel_tm800a550l_info,
},
+ {
+ /* Vexia Edu Atla 10 tablet */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+ /* Above strings are too generic, also match on BIOS date */
+ DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"),
+ },
+ .driver_data = (void *)&vexia_edu_atla10_info,
+ },
{
/* Xiaomi Mi Pad 2 */
.matches = {
diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index 7db8aa58b907..01f1e4826426 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -9,9 +9,12 @@
*/
#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/device/bus.h>
#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/leds.h>
+#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
@@ -597,6 +600,168 @@ const struct x86_dev_info whitelabel_tm800a550l_info __initconst = {
.gpiod_lookup_tables = whitelabel_tm800a550l_gpios,
};
+/*
+ * Vexia EDU ATLA 10 tablet, Android 4.2 / 4.4 + Guadalinex Ubuntu tablet
+ * distributed to schools in the Spanish Andalucía region.
+ */
+const char * const crystal_cove_pwrsrc_psy[] = { "crystal_cove_pwrsrc" };
+
+static const struct property_entry vexia_edu_atla10_ulpmc_props[] = {
+ PROPERTY_ENTRY_STRING_ARRAY("supplied-from", crystal_cove_pwrsrc_psy),
+ { }
+};
+
+const struct software_node vexia_edu_atla10_ulpmc_node = {
+ .properties = vexia_edu_atla10_ulpmc_props,
+};
+
+static const char * const vexia_edu_atla10_accel_mount_matrix[] = {
+ "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1"
+};
+
+static const struct property_entry vexia_edu_atla10_accel_props[] = {
+ PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", vexia_edu_atla10_accel_mount_matrix),
+ { }
+};
+
+static const struct software_node vexia_edu_atla10_accel_node = {
+ .properties = vexia_edu_atla10_accel_props,
+};
+
+static const struct property_entry vexia_edu_atla10_touchscreen_props[] = {
+ PROPERTY_ENTRY_U32("hid-descr-addr", 0x0000),
+ PROPERTY_ENTRY_U32("post-reset-deassert-delay-ms", 120),
+ { }
+};
+
+static const struct software_node vexia_edu_atla10_touchscreen_node = {
+ .properties = vexia_edu_atla10_touchscreen_props,
+};
+
+static const struct property_entry vexia_edu_atla10_pmic_props[] = {
+ PROPERTY_ENTRY_BOOL("linux,register-pwrsrc-power_supply"),
+ { }
+};
+
+static const struct software_node vexia_edu_atla10_pmic_node = {
+ .properties = vexia_edu_atla10_pmic_props,
+};
+
+static const struct x86_i2c_client_info vexia_edu_atla10_i2c_clients[] __initconst = {
+ { /* I2C attached embedded controller, used to access fuel-gauge */
+ .board_info = {
+ .type = "vexia_atla10_ec",
+ .addr = 0x76,
+ .dev_name = "ulpmc",
+ .swnode = &vexia_edu_atla10_ulpmc_node,
+ },
+ .adapter_path = "0000:00:18.1",
+ },
+ { /* RT5642 audio codec */
+ .board_info = {
+ .type = "rt5640",
+ .addr = 0x1c,
+ .dev_name = "rt5640",
+ },
+ .adapter_path = "0000:00:18.2",
+ .irq_data = {
+ .type = X86_ACPI_IRQ_TYPE_GPIOINT,
+ .chip = "INT33FC:02",
+ .index = 4,
+ .trigger = ACPI_EDGE_SENSITIVE,
+ .polarity = ACPI_ACTIVE_HIGH,
+ .con_id = "rt5640_irq",
+ },
+ },
+ {
+ /* kxtj21009 accelerometer */
+ .board_info = {
+ .type = "kxtj21009",
+ .addr = 0x0f,
+ .dev_name = "kxtj21009",
+ .swnode = &vexia_edu_atla10_accel_node,
+ },
+ .adapter_path = "0000:00:18.5",
+ }, {
+ /* FT5416DQ9 touchscreen controller */
+ .board_info = {
+ .type = "hid-over-i2c",
+ .addr = 0x38,
+ .dev_name = "FTSC1000",
+ .swnode = &vexia_edu_atla10_touchscreen_node,
+ },
+ .adapter_path = "0000:00:18.6",
+ .irq_data = {
+ .type = X86_ACPI_IRQ_TYPE_APIC,
+ .index = 0x45,
+ .trigger = ACPI_LEVEL_SENSITIVE,
+ .polarity = ACPI_ACTIVE_HIGH,
+ },
+ }, {
+ /* Crystal Cove PMIC */
+ .board_info = {
+ .type = "intel-crystal-cove",
+ .addr = 0x6e,
+ .dev_name = "intel-crystal-cove",
+ .swnode = &vexia_edu_atla10_pmic_node,
+ },
+ .adapter_path = "0000:00:18.7",
+ .irq_data = {
+ .type = X86_ACPI_IRQ_TYPE_APIC,
+ .index = 0x43,
+ .trigger = ACPI_LEVEL_SENSITIVE,
+ .polarity = ACPI_ACTIVE_HIGH,
+ },
+ }
+};
+
+static struct gpiod_lookup_table vexia_edu_atla10_ft5416_gpios = {
+ .dev_id = "i2c-FTSC1000",
+ .table = {
+ GPIO_LOOKUP("INT33FC:00", 60, "reset", GPIO_ACTIVE_LOW),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table * const vexia_edu_atla10_gpios[] = {
+ &vexia_edu_atla10_ft5416_gpios,
+ NULL
+};
+
+static int __init vexia_edu_atla10_init(struct device *dev)
+{
+ struct device *pdev;
+ int ret;
+
+ /* Enable the Wifi module by setting the wifi_enable pin to 1 */
+ ret = x86_android_tablet_get_gpiod("INT33FC:02", 20, "wifi_enable",
+ false, GPIOD_OUT_HIGH, NULL);
+ if (ret)
+ return ret;
+
+ /* Reprobe the SDIO controller to enumerate the now enabled Wifi module */
+ pdev = bus_find_device_by_name(&pci_bus_type, NULL, "0000:00:11.0");
+ if (!pdev)
+ return -EPROBE_DEFER;
+
+ ret = device_reprobe(pdev);
+ if (ret)
+ dev_warn(pdev, "Reprobing 0000:00:11.0 error: %d\n", ret);
+
+ put_device(pdev);
+ return 0;
+}
+
+const struct x86_dev_info vexia_edu_atla10_info __initconst = {
+ .i2c_client_info = vexia_edu_atla10_i2c_clients,
+ .i2c_client_count = ARRAY_SIZE(vexia_edu_atla10_i2c_clients),
+ .gpiod_lookup_tables = vexia_edu_atla10_gpios,
+ .init = vexia_edu_atla10_init,
+ .use_pci_devname = true,
+};
+
/*
* The firmware node for ktd2026 on Xaomi pad2. It composed of a RGB LED node
* with three subnodes for each color (B/G/R). The RGB LED node is named
diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
index d26a4792eb0e..0fc7e8cff672 100644
--- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
+++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
@@ -120,6 +120,7 @@ extern const struct x86_dev_info nextbook_ares8_info;
extern const struct x86_dev_info nextbook_ares8a_info;
extern const struct x86_dev_info peaq_c1010_info;
extern const struct x86_dev_info whitelabel_tm800a550l_info;
+extern const struct x86_dev_info vexia_edu_atla10_info;
extern const struct x86_dev_info xiaomi_mipad2_info;
extern const struct dmi_system_id x86_android_tablet_ids[];
--
2.47.0
