The "input-events" LED trigger used to turn on the backlight LEDs had to
be rewritten to use led_trigger_register_simple() + led_trigger_event()
to fix a serious locking issue.
This means it no longer supports using blink_brightness to set a per LED
brightness for the trigger and it no longer sets LED_CORE_SUSPENDRESUME.
Adjust the MiPad 2 bottom bezel touch buttons LED class device to match:
1. Make LED_FULL the maximum brightness to fix the LED brightness
being very low when on.
2. Set flags = LED_CORE_SUSPENDRESUME.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/platform/x86/x86-android-tablets/other.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index aad7114c43c3..76cce8120bd2 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -670,7 +670,7 @@ static const struct software_node *ktd2026_node_group[] = {
* is controlled by the "pwm_soc_lpss_2" PWM output.
*/
#define XIAOMI_MIPAD2_LED_PERIOD_NS 19200
-#define XIAOMI_MIPAD2_LED_DEFAULT_DUTY 6000 /* From Android kernel */
+#define XIAOMI_MIPAD2_LED_MAX_DUTY 6000 /* From Android kernel */
static struct pwm_device *xiaomi_mipad2_led_pwm;
@@ -679,7 +679,7 @@ static int xiaomi_mipad2_brightness_set(struct led_classdev *led_cdev,
{
struct pwm_state state = {
.period = XIAOMI_MIPAD2_LED_PERIOD_NS,
- .duty_cycle = val,
+ .duty_cycle = XIAOMI_MIPAD2_LED_MAX_DUTY * val / LED_FULL,
/* Always set PWM enabled to avoid the pin floating */
.enabled = true,
};
@@ -701,11 +701,11 @@ static int __init xiaomi_mipad2_init(struct device *dev)
return -ENOMEM;
led_cdev->name = "mipad2:white:touch-buttons-backlight";
- led_cdev->max_brightness = XIAOMI_MIPAD2_LED_PERIOD_NS;
- /* "input-events" trigger uses blink_brightness */
- led_cdev->blink_brightness = XIAOMI_MIPAD2_LED_DEFAULT_DUTY;
+ led_cdev->max_brightness = LED_FULL;
led_cdev->default_trigger = "input-events";
led_cdev->brightness_set_blocking = xiaomi_mipad2_brightness_set;
+ /* Turn LED off during suspend */
+ led_cdev->flags = LED_CORE_SUSPENDRESUME;
ret = devm_led_classdev_register(dev, led_cdev);
if (ret)
--
2.46.0
