[PATCH 2/3] platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The dell-uart-backlight driver supports backlight control on Dell All In
One (AIO) models using a backlight controller board connected to an UART.

In DSDT this uart port will be defined as:

   Name (_HID, "DELL0501")
   Name (_CID, EisaId ("PNP0501")

Now the first AIO has turned up which has not only the DSDT bits for this,
but also an actual controller attached to the UART, yet it is not using
this controller for backlight control.

Use the acpi_video_get_backlight_type() function from the ACPI video-detect
code to check if the dell-uart-backlight driver should actually be used.
This allows reusing the existing ACPI video-detect infra to override
the backlight control method on the commandline or with DMI quirks.

Fixes: 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/platform/x86/dell/Kconfig               | 1 +
 drivers/platform/x86/dell/dell-uart-backlight.c | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index f711c59fcf1b..11c2cb7d05b0 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -162,6 +162,7 @@ config DELL_SMO8800
 config DELL_UART_BACKLIGHT
 	tristate "Dell AIO UART Backlight driver"
 	depends on ACPI
+	depends on ACPI_VIDEO
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIAL_DEV_BUS
 	help
diff --git a/drivers/platform/x86/dell/dell-uart-backlight.c b/drivers/platform/x86/dell/dell-uart-backlight.c
index 87d2a20b4cb3..3995f90add45 100644
--- a/drivers/platform/x86/dell/dell-uart-backlight.c
+++ b/drivers/platform/x86/dell/dell-uart-backlight.c
@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/wait.h>
+#include <acpi/video.h>
 #include "../serdev_helpers.h"
 
 /* The backlight controller must respond within 1 second */
@@ -332,10 +333,17 @@ struct serdev_device_driver dell_uart_bl_serdev_driver = {
 
 static int dell_uart_bl_pdev_probe(struct platform_device *pdev)
 {
+	enum acpi_backlight_type bl_type;
 	struct serdev_device *serdev;
 	struct device *ctrl_dev;
 	int ret;
 
+	bl_type = acpi_video_get_backlight_type();
+	if (bl_type != acpi_backlight_dell_uart) {
+		dev_dbg(&pdev->dev, "Not loading (ACPI backlight type = %d)\n", bl_type);
+		return -ENODEV;
+	}
+
 	ctrl_dev = get_serdev_controller("DELL0501", NULL, 0, "serial0");
 	if (IS_ERR(ctrl_dev))
 		return PTR_ERR(ctrl_dev);
-- 
2.46.0





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux