Re: [PATCH v7 1/1] platform/x86: Add wmi driver for Casper Excalibur laptops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 6 Aug 2024, Mustafa Ekşi wrote:

> This wmi driver supports changing Casper Excalibur laptops' keyboard
> backlight brightness and color, reading fan speeds and changing power
> profiles. Multicolor led device is used for backlight, platform_profile
> for power management and hwmon for fan speeds. It supports both old (10th
> gen or older) and new (11th gen or newer) laptops. It uses x86_match_cpu
> to check if the laptop is old or new.
> 
> Signed-off-by: Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>
> ---
> Changes in v7:
>  - Sorted includes
>  - Changed corner led's name to biaslight.
>  - Better mutex usage.
>  - Get current brightness value when setting a new color.
> Changes in v6:
>  - Added "rgb" to zone names and changed kbd_zoned_backlight-corners to
>    backlight.
>  - Changed led structure to have 3 seperate subleds instead of one rgb
>    subled.
>  - Removed led_cache.
>  - Removing platform_profile and destroying casper_mutex is managed by
>    devm_add_action_or_reset now.
>  - Removed casper_wmi_remove.
>  - Reordered some variables.
> Changes in v5:
>  - Added mutex_destroy to casper_wmi_probe error handling
>  - casper_multicolor_register now sets all leds to CASPER_DEFAULT_COLOR
>  - Some minor changes
> Changes in v4:
>  - Renamed casper_driver to casper_drv
>  - Moved all global variables to casper_drv struct. Devices access
>   casper_drv via wdev's driver_data.
>  - Removed struct led_cache, because only its u32 array was used. It is
>    replaced with color_cache.
>  - Added mutex_locks in casper_set and casper_query, so they now accept
>    casper_drv instead of wmi_device as argument.
>  - Changed endianess conversion in hwmon_read to something sparse doesn't
>    complain about.
>  - Moved registrations of multicolor leds and platform profile to their
>    own functions. This makes casper_wmi_probe more readable.
>  - Added .no_singleton to wmi_device.
>  - Some minor changes.
> Changes in v3:
>  - Replaced led_control attribute with multicolor led interface.
>  - Added struct led_cache, instead of storing only last color change.
>  - Added dmi list to prevent registering platform_profile driver in models
>    that doesn't have this feature.
>  - Added a x86_cpu_id to differentiate older laptops that are reporting
>    fan speeds in big-endian. Also newer laptops have a different power
>    profile scheme. I'm using x86_cpu_id because they don't have a
>    difference in model names, only in cpu generations (the official driver
>    download page makes you select your cpu's generation too).
>  - Removed hwmon_pwm device in favor of platform_profile driver. It
>    indirectly affects fans' speed but they also affect frequency and
>    power consumption as well.
>  - Replaced handwritten masks with GENMASK equivalents.
>  - Replaced led_classdev_register with
>    devm_led_classdev_multicolor_register. This should solve the bug
>    where led_classdev remains registered even if casper_wmi_probe
>    returns -ENODEV.
>  - Removed select NEW_LEDS and LEDS_CLASS, because it creates recursive
>    dependencies.
>  - And some minor changes.
> Changes in v2:
>  - Added masks for
>  - Changed casper_set and casper_query returns Linux error code rather
>    than acpi_status.
>  - replaced complicated bit operations with FIELD_GET.
>  - Fixed some indentation and spacing.
>  - Broke fan speeds further.
>  - Moved module metadata to the end of the file.
> ---
>  MAINTAINERS                       |   6 +
>  drivers/platform/x86/Kconfig      |  14 +
>  drivers/platform/x86/Makefile     |   1 +
>  drivers/platform/x86/casper-wmi.c | 640 ++++++++++++++++++++++++++++++
>  4 files changed, 661 insertions(+)
>  create mode 100644 drivers/platform/x86/casper-wmi.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8766f3e5e87..7b03fd1239a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5005,6 +5005,12 @@ S:	Maintained
>  W:	https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
>  F:	drivers/net/wireless/ath/carl9170/
>  
> +CASPER EXCALIBUR WMI DRIVER
> +M:	Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>
> +L:	platform-driver-x86@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	drivers/platform/x86/casper-wmi.c
> +
>  CAVIUM I2C DRIVER
>  M:	Robert Richter <rric@xxxxxxxxxx>
>  S:	Odd Fixes
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 665fa952498..7560d90ce75 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1182,6 +1182,20 @@ config SEL3350_PLATFORM
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called sel3350-platform.
>  
> +config CASPER_WMI
> +	tristate "Casper Excalibur Laptop WMI driver"
> +	depends on ACPI_WMI
> +	depends on HWMON
> +	depends on LEDS_CLASS_MULTICOLOR
> +	select ACPI_PLATFORM_PROFILE
> +	help
> +	  Say Y here if you want to support WMI-based fan speed reporting,
> +	  power management and keyboard backlight support on Casper Excalibur
> +	  Laptops.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called casper-wmi.
> +
>  endif # X86_PLATFORM_DEVICES
>  
>  config P2SB
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index e1b14294706..639509f9afa 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_MXM_WMI)			+= mxm-wmi.o
>  obj-$(CONFIG_NVIDIA_WMI_EC_BACKLIGHT)	+= nvidia-wmi-ec-backlight.o
>  obj-$(CONFIG_XIAOMI_WMI)		+= xiaomi-wmi.o
>  obj-$(CONFIG_GIGABYTE_WMI)		+= gigabyte-wmi.o
> +obj-$(CONFIG_CASPER_WMI)		+= casper-wmi.o
>  
>  # Acer
>  obj-$(CONFIG_ACERHDF)		+= acerhdf.o
> diff --git a/drivers/platform/x86/casper-wmi.c b/drivers/platform/x86/casper-wmi.c
> new file mode 100644
> index 00000000000..a02fea46f78
> --- /dev/null
> +++ b/drivers/platform/x86/casper-wmi.c
> @@ -0,0 +1,640 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +#include <linux/acpi.h>
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/bits.h>
> +#include <linux/cleanup.h>
> +#include <linux/container_of.h>
> +#include <linux/device.h>
> +#include <linux/dmi.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/leds.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/mutex_types.h>
> +#include <linux/platform_profile.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/types.h>
> +#include <linux/wmi.h>
> +
> +#include <asm/cpu_device_id.h>
> +#include <asm/intel-family.h>
> +
> +#define CASPER_WMI_GUID "644C5791-B7B0-4123-A90B-E93876E0DAAD"
> +
> +#define CASPER_READ 0xfa00
> +#define CASPER_WRITE 0xfb00
> +#define CASPER_GET_HARDWAREINFO 0x0200
> +#define CASPER_SET_LED 0x0100
> +#define CASPER_POWERPLAN 0x0300
> +
> +#define CASPER_KEYBOARD_LED_1 0x03
> +#define CASPER_KEYBOARD_LED_2 0x04
> +#define CASPER_KEYBOARD_LED_3 0x05
> +#define CASPER_ALL_KEYBOARD_LEDS 0x06
> +#define CASPER_CORNER_LEDS 0x07

Please align these values and the block above it using tabs.

> +#define CASPER_LED_COUNT 4
> +
> +static const char * const zone_names[CASPER_LED_COUNT] = {
> +	"casper:rgb:kbd_zoned_backlight-right",
> +	"casper:rgb:kbd_zoned_backlight-middle",
> +	"casper:rgb:kbd_zoned_backlight-left",
> +	"casper:rgb:biaslight",
> +};
> +
> +#define CASPER_LED_ALPHA GENMASK(31, 24)
> +#define CASPER_LED_RED	 GENMASK(23, 16)
> +#define CASPER_LED_GREEN GENMASK(15, 8)
> +#define CASPER_LED_BLUE  GENMASK(7, 0)

Something wrong with the alignment with these 4, use tabs only please.

> +#define CASPER_DEFAULT_COLOR (CASPER_LED_RED | CASPER_LED_GREEN | \
> +			      CASPER_LED_BLUE)
> +#define CASPER_FAN_CPU 0
> +#define CASPER_FAN_GPU 1
> +
> +enum casper_power_profile_old {
> +	CASPER_HIGH_PERFORMANCE = 1,
> +	CASPER_GAMING		= 2,
> +	CASPER_TEXT_MODE	= 3,
> +	CASPER_POWERSAVE	= 4

Add command to any non-terminating entries.

> +};
> +
> +enum casper_power_profile_new {
> +	CASPER_NEW_HIGH_PERFORMANCE	= 0,
> +	CASPER_NEW_GAMING		= 1,
> +	CASPER_NEW_AUDIO		= 2

Comma.

> +};
> +
> +struct casper_quirk_entry {
> +	bool big_endian_fans;
> +	bool no_power_profiles;
> +	bool new_power_scheme;
> +};
> +
> +struct casper_fourzone_led {
> +	struct led_classdev_mc mc_led;
> +	struct mc_subled subleds[3];
> +};
> +
> +struct casper_drv {
> +	struct platform_profile_handler handler;
> +	struct mutex mutex;
> +	struct casper_fourzone_led *leds;
> +	struct wmi_device *wdev;
> +	struct casper_quirk_entry *quirk_applied;
> +};
> +
> +struct casper_wmi_args {
> +	u16 a0, a1;
> +	u32 a2, a3, a4, a5, a6, a7, a8;
> +};
> +
> +enum casper_led_mode {
> +	LED_NORMAL = 0x10,
> +	LED_BLINK = 0x20,
> +	LED_FADE = 0x30,
> +	LED_HEARTBEAT = 0x40,
> +	LED_REPEAT = 0x50,
> +	LED_RANDOM = 0x60

Align.

> +};
> +
> +static int casper_set(struct casper_drv *drv, u16 a1, u8 led_id, u32 data)
> +{
> +	struct casper_wmi_args wmi_args;
> +	struct acpi_buffer input;
> +	acpi_status status;
> +
> +	wmi_args = (struct casper_wmi_args) {
> +		.a0 = CASPER_WRITE,
> +		.a1 = a1,
> +		.a2 = led_id,
> +		.a3 = data
> +	};
> +
> +	input = (struct acpi_buffer) {
> +		(acpi_size) sizeof(struct casper_wmi_args),
> +		&wmi_args
> +	};
> +
> +	guard(mutex)(&drv->mutex);
> +
> +	status = wmidev_block_set(drv->wdev, 0, &input);
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int casper_query(struct casper_drv *drv, u16 a1,
> +			struct casper_wmi_args *out)
> +{
> +	struct casper_wmi_args wmi_args;
> +	struct acpi_buffer input;
> +	union acpi_object *obj;
> +	acpi_status status;
> +	int ret = 0;
> +
> +	wmi_args = (struct casper_wmi_args) {
> +		.a0 = CASPER_READ,
> +		.a1 = a1
> +	};
> +	input = (struct acpi_buffer) {
> +		(acpi_size) sizeof(struct casper_wmi_args),
> +		&wmi_args
> +	};
> +
> +	guard(mutex)(&drv->mutex);
> +
> +	status = wmidev_block_set(drv->wdev, 0, &input);
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	obj = wmidev_block_query(drv->wdev, 0);
> +	if (!obj)
> +		return -EIO;
> +
> +	if (obj->type != ACPI_TYPE_BUFFER) { // obj will be 0x10 on failure

obj will be -> type is ?

I'd put the comment on the line preceeding the if statement.

> +		ret = -EINVAL;
> +		goto freeobj;
> +	}
> +	if (obj->buffer.length != sizeof(struct casper_wmi_args)) {
> +		ret = -EIO;
> +		goto freeobj;
> +	}
> +
> +	memcpy(out, obj->buffer.pointer, sizeof(struct casper_wmi_args));
> +
> +freeobj:
> +	kfree(obj);
> +	return ret;
> +}
> +
> +static u32 get_zone_color(struct casper_fourzone_led z)
> +{
> +	return  FIELD_PREP(CASPER_LED_RED, z.subleds[0].intensity) |
> +		FIELD_PREP(CASPER_LED_GREEN, z.subleds[1].intensity) |
> +		FIELD_PREP(CASPER_LED_BLUE, z.subleds[2].intensity);
> +}
> +
> +static enum led_brightness get_casper_brightness(struct led_classdev *led_cdev)
> +{
> +	struct casper_drv *drv = dev_get_drvdata(led_cdev->dev->parent);
> +	struct casper_wmi_args hardware_alpha = {0};
> +
> +	if (strcmp(led_cdev->name, zone_names[3]) == 0)
> +		return drv->leds[3].mc_led.led_cdev.brightness;

Please name these 3 literals with a define so one doesn't need to look up 
the zone_names to understand this code.

> +
> +	casper_query(drv, CASPER_GET_HARDWAREINFO, &hardware_alpha);
> +
> +	return hardware_alpha.a6;
> +}
> +
> +static void set_casper_brightness(struct led_classdev *led_cdev,
> +				  enum led_brightness brightness)
> +{
> +	u32 bright_with_mode, bright_prep, led_data, led_data_no_alpha;
> +	struct casper_drv *drv;
> +	u8 zone_to_change;
> +	size_t zone;
> +
> +	drv = dev_get_drvdata(led_cdev->dev->parent);
> +
> +	for (size_t i = 0; i < CASPER_LED_COUNT; i++)
> +		if (strcmp(led_cdev->name, zone_names[i]) == 0)
> +			zone = i;
> +	if (zone == 3)

Use the define you created for the 3 literal above.

> +		zone_to_change = CASPER_CORNER_LEDS;
> +	else
> +		zone_to_change = zone + CASPER_KEYBOARD_LED_1;
> +
> +	led_data_no_alpha = get_zone_color(drv->leds[zone]) & ~CASPER_LED_ALPHA;

Assign directly to led_data variable.

> +
> +	if (brightness == drv->leds[zone].mc_led.led_cdev.brightness)
> +		brightness = get_casper_brightness(&drv->leds[zone].mc_led.led_cdev);
> +	bright_with_mode = brightness | LED_NORMAL;
> +
> +	bright_prep = FIELD_PREP(CASPER_LED_ALPHA, bright_with_mode);
> +	led_data = bright_prep | led_data_no_alpha;

	led_data |= FIELD_PREP(CASPER_LED_ALPHA, brightness | LED_NORMAL);

and drop bright_prep and bright_with_mode variables.

> +	casper_set(drv, CASPER_SET_LED, zone_to_change, led_data);

I think the mutex is too fine-grained. I believe you'd want to protect the 
part covering get_casper_brightness() and casper_set() with a single 
critical section, and perhaps also get_zone_color(), but I have to admit I 
didn't fully understand what's going on in this function.

> +}
> +
> +static int casper_platform_profile_get(struct platform_profile_handler *pprof,
> +				       enum platform_profile_option *profile)
> +{
> +	struct casper_drv *drv = container_of(pprof, struct casper_drv,
> +					      handler);

These can be put to one line without loss of significant information.

> +	struct casper_wmi_args ret_buff = {0};
> +	int ret;
> +
> +	ret = casper_query(drv, CASPER_POWERPLAN, &ret_buff);
> +	if (ret)
> +		return ret;
> +
> +	if (drv->quirk_applied->new_power_scheme) {
> +		switch (ret_buff.a2) {
> +		case CASPER_NEW_HIGH_PERFORMANCE:
> +			*profile = PLATFORM_PROFILE_PERFORMANCE;
> +			break;
> +		case CASPER_NEW_GAMING:
> +			*profile = PLATFORM_PROFILE_BALANCED;
> +			break;
> +		case CASPER_NEW_AUDIO:
> +			*profile = PLATFORM_PROFILE_LOW_POWER;
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +		return 0;
> +	}
> +
> +	switch (ret_buff.a2) {
> +	case CASPER_HIGH_PERFORMANCE:
> +		*profile = PLATFORM_PROFILE_PERFORMANCE;
> +		break;
> +	case CASPER_GAMING:
> +		*profile = PLATFORM_PROFILE_BALANCED_PERFORMANCE;
> +		break;
> +	case CASPER_TEXT_MODE:
> +		*profile = PLATFORM_PROFILE_BALANCED;
> +		break;
> +	case CASPER_POWERSAVE:
> +		*profile = PLATFORM_PROFILE_LOW_POWER;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int casper_platform_profile_set(struct platform_profile_handler *pprof,
> +				       enum platform_profile_option profile)
> +{
> +	struct casper_drv *drv = container_of(pprof, struct casper_drv,
> +					      handler);
> +	enum casper_power_profile_old prf_old;
> +	enum casper_power_profile_new prf_new;
> +
> +	if (drv->quirk_applied->new_power_scheme) {
> +
> +		switch (profile) {
> +		case PLATFORM_PROFILE_PERFORMANCE:
> +			prf_new = CASPER_NEW_HIGH_PERFORMANCE;
> +			break;
> +		case PLATFORM_PROFILE_BALANCED:
> +			prf_new = CASPER_NEW_GAMING;
> +			break;
> +		case PLATFORM_PROFILE_LOW_POWER:
> +			prf_new = CASPER_NEW_AUDIO;
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +
> +		return casper_set(drv, CASPER_POWERPLAN, prf_new, 0);
> +	}
> +
> +	switch (profile) {
> +	case PLATFORM_PROFILE_PERFORMANCE:
> +		prf_old = CASPER_HIGH_PERFORMANCE;
> +		break;
> +	case PLATFORM_PROFILE_BALANCED_PERFORMANCE:
> +		prf_old = CASPER_GAMING;
> +		break;
> +	case PLATFORM_PROFILE_BALANCED:
> +		prf_old = CASPER_TEXT_MODE;
> +		break;
> +	case PLATFORM_PROFILE_LOW_POWER:
> +		prf_old = CASPER_POWERSAVE;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return casper_set(drv, CASPER_POWERPLAN, prf_old, 0);
> +}
> +
> +static umode_t casper_wmi_hwmon_is_visible(const void *drvdata,
> +					   enum hwmon_sensor_types type,
> +					   u32 attr, int channel)
> +{
> +	return 0444;
> +}
> +
> +static int casper_wmi_hwmon_read(struct device *dev,
> +				 enum hwmon_sensor_types type, u32 attr,
> +				 int channel, long *val)
> +{
> +	struct casper_drv *drv = dev_get_drvdata(dev->parent);
> +	struct casper_wmi_args out = { 0 };
> +	int ret;
> +
> +	ret = casper_query(drv, CASPER_GET_HARDWAREINFO, &out);
> +	if (ret)
> +		return ret;
> +
> +	switch (channel) {
> +	case CASPER_FAN_CPU:
> +		if (drv->quirk_applied->big_endian_fans)
> +			*val = be16_to_cpu(*(__be16 *)&out.a4);
> +		else
> +			*val = out.a5;
> +		break;
> +	case CASPER_FAN_GPU:
> +		if (drv->quirk_applied->big_endian_fans)
> +			*val = be16_to_cpu(*(__be16 *)&out.a5);
> +		else
> +			*val = out.a5;
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int casper_wmi_hwmon_read_string(struct device *dev,
> +					enum hwmon_sensor_types type, u32 attr,
> +					int channel, const char **str)
> +{
> +	if (channel == CASPER_FAN_CPU)
> +		*str = "cpu_fan_speed";
> +	else if (channel == CASPER_FAN_GPU)
> +		*str = "gpu_fan_speed";
> +	return 0;
> +}
> +
> +static const struct hwmon_ops casper_wmi_hwmon_ops = {
> +	.is_visible = &casper_wmi_hwmon_is_visible,
> +	.read = &casper_wmi_hwmon_read,
> +	.read_string = &casper_wmi_hwmon_read_string,
> +};
> +
> +static const struct hwmon_channel_info *const casper_wmi_hwmon_info[] = {
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_INPUT | HWMON_F_LABEL,
> +			   HWMON_F_INPUT | HWMON_F_LABEL),
> +	NULL
> +};
> +
> +static const struct hwmon_chip_info casper_wmi_hwmon_chip_info = {
> +	.ops = &casper_wmi_hwmon_ops,
> +	.info = casper_wmi_hwmon_info,
> +};
> +
> +static struct casper_quirk_entry gen_older_than_11 = {
> +	.big_endian_fans = true,
> +	.new_power_scheme = false

Please use comma on any member that isn't a terminator.

> +};
> +
> +static struct casper_quirk_entry gen_newer_than_11 = {
> +	.big_endian_fans = false,
> +	.new_power_scheme = true

Ditto.

> +};
> +
> +static const struct x86_cpu_id casper_gen[] = {
> +	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, &gen_older_than_11),
> +	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, &gen_older_than_11),
> +	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, &gen_newer_than_11),
> +	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, &gen_newer_than_11),
> +	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, &gen_newer_than_11),
> +	X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE, &gen_newer_than_11),
> +	{}
> +};
> +
> +static struct casper_quirk_entry quirk_no_power_profile = {
> +	.no_power_profiles = true

Comma.

> +};
> +
> +static struct casper_quirk_entry quirk_has_power_profile = {
> +	.no_power_profiles = false

Ditto.

> +};
> +
> +static const struct dmi_system_id casper_quirks[] = {
> +	{
> +		.ident = "CASPER EXCALIBUR G650",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G650")
> +		},
> +		.driver_data = &quirk_no_power_profile

Comma, more of them below.

> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G670",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G670")
> +		},
> +		.driver_data = &quirk_no_power_profile
> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G750",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G750")
> +		},
> +		.driver_data = &quirk_no_power_profile
> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G770",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G770")
> +		},
> +		.driver_data = &quirk_has_power_profile
> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G780",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G780")
> +		},
> +		.driver_data = &quirk_has_power_profile
> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G870",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G870")
> +		},
> +		.driver_data = &quirk_has_power_profile
> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G900",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G900")
> +		},
> +		.driver_data = &quirk_has_power_profile
> +	},
> +	{
> +		.ident = "CASPER EXCALIBUR G911",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR,
> +				  "CASPER BILGISAYAR SISTEMLERI"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "EXCALIBUR G911")
> +		},
> +		.driver_data = &quirk_has_power_profile
> +	},
> +	{ }
> +};
> +
> +static void casper_pp_remove(void *data)
> +{
> +	platform_profile_remove();
> +}
> +
> +static int casper_platform_profile_register(struct casper_drv *drv)
> +{
> +	int ret = 0;
> +
> +	drv->handler.profile_get = casper_platform_profile_get;
> +	drv->handler.profile_set = casper_platform_profile_set;
> +
> +	set_bit(PLATFORM_PROFILE_LOW_POWER, drv->handler.choices);
> +	set_bit(PLATFORM_PROFILE_BALANCED, drv->handler.choices);
> +	if (!drv->quirk_applied->new_power_scheme)
> +		set_bit(PLATFORM_PROFILE_BALANCED_PERFORMANCE,
> +			drv->handler.choices);
> +	set_bit(PLATFORM_PROFILE_PERFORMANCE, drv->handler.choices);
> +
> +	ret = platform_profile_register(&drv->handler);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_add_action_or_reset(&drv->wdev->dev, casper_pp_remove,
> +				       NULL);

Fits to one line.

> +	if (ret)
> +		platform_profile_remove();
> +
> +	return ret;
> +}
> +
> +static int casper_multicolor_register(struct casper_drv *drv)
> +{
> +	int ret = 0;
> +
> +	drv->leds = devm_kcalloc(&drv->wdev->dev,
> +		CASPER_LED_COUNT, sizeof(*drv->leds), GFP_KERNEL);
> +	if (!drv->leds)
> +		return -ENOMEM;
> +
> +	for (size_t i = 0; i < CASPER_LED_COUNT; i++) {

Add a temporary variable for drv->leds[i].

> +		for (size_t j = 0; j < 3; j++) {

Use ARRAY_SIZE() instead of 3.

> +			drv->leds[i].subleds[j] = (struct mc_subled) {
> +				.color_index = LED_COLOR_ID_RED + j,
> +				.brightness = 255,
> +				.intensity = 255

Add comma.

> +			};
> +		}
> +		drv->leds[i].mc_led = (struct led_classdev_mc){

Inconsistent spacing in ){.

> +			.led_cdev = {
> +				.name = zone_names[i],
> +				.brightness = 0,
> +				.max_brightness = 2,
> +				.brightness_set = &set_casper_brightness,
> +				.brightness_get = &get_casper_brightness,
> +				.color = LED_COLOR_ID_MULTI,
> +			},
> +			.num_colors = 3,
> +			.subled_info = drv->leds[i].subleds

comma.

> +		};
> +
> +		ret = devm_led_classdev_multicolor_register(&drv->wdev->dev,
> +							&drv->leds[i].mc_led);
> +		if (ret)
> +			return -ENODEV;
> +	}
> +
> +	// Setting leds to the default color

LEDs


While there were quite many comments, they're quite minor except for the 
mutex coverage thing so this feels to be in relatively good shape already.

-- 
 i.

> +	ret = casper_set(drv, CASPER_SET_LED, CASPER_ALL_KEYBOARD_LEDS,
> +			 CASPER_DEFAULT_COLOR);
> +	if (ret)
> +		return ret;
> +
> +	ret = casper_set(drv, CASPER_SET_LED, CASPER_CORNER_LEDS,
> +			 CASPER_DEFAULT_COLOR);
> +	return ret;
> +}
> +
> +static int casper_wmi_probe(struct wmi_device *wdev, const void *context)
> +{
> +	struct casper_quirk_entry *pp_quirk;
> +	const struct dmi_system_id *dmi_id;
> +	const struct x86_cpu_id *gen_id;
> +	struct device *hwmon_dev;
> +	struct casper_drv *drv;
> +	int ret;
> +
> +	drv = devm_kzalloc(&wdev->dev, sizeof(*drv), GFP_KERNEL);
> +	if (!drv)
> +		return -ENOMEM;
> +
> +	drv->wdev = wdev;
> +	dev_set_drvdata(&wdev->dev, drv);
> +
> +	gen_id = x86_match_cpu(casper_gen);
> +	if (!gen_id)
> +		return -ENODEV;
> +
> +	drv->quirk_applied = (struct casper_quirk_entry *)gen_id->driver_data;
> +
> +	dmi_id = dmi_first_match(casper_quirks);
> +	if (!dmi_id)
> +		return -ENODEV;
> +
> +	pp_quirk = (struct casper_quirk_entry *)dmi_id->driver_data;
> +	drv->quirk_applied->no_power_profiles = pp_quirk->no_power_profiles;
> +
> +	mutex_init(&drv->mutex);
> +	ret = devm_mutex_init(&wdev->dev, &drv->mutex);
> +	if (ret)
> +		return ret;
> +
> +	ret = casper_multicolor_register(drv);
> +	if (ret)
> +		return ret;
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(&wdev->dev,
> +						"casper_wmi", wdev,
> +						&casper_wmi_hwmon_chip_info,
> +						NULL);
> +	if (IS_ERR(hwmon_dev))
> +		return PTR_ERR(hwmon_dev);
> +
> +	if (!drv->quirk_applied->no_power_profiles) {
> +		ret = casper_platform_profile_register(drv);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct wmi_device_id casper_wmi_id_table[] = {
> +	{ CASPER_WMI_GUID, NULL },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(wmi, casper_wmi_id_table);
> +
> +static struct wmi_driver casper_drv = {
> +	.driver = {
> +		.name = "casper-wmi",
> +	},
> +	.id_table = casper_wmi_id_table,
> +	.probe = casper_wmi_probe,
> +	.no_singleton = true,
> +};
> +
> +module_wmi_driver(casper_drv);
> +
> +MODULE_AUTHOR("Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Casper Excalibur Laptop WMI driver");
> +MODULE_LICENSE("GPL");
> 

[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux