DG2 needs to adjust the discovery offset WRT the GT BAR not the
P2SB bar so add the base_adjust value to allow for the difference
to be used.
Update xe_vsec.c to include DG2 header information.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@xxxxxxxxx>
---
drivers/gpu/drm/xe/xe_vsec.c | 81 ++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/drivers/gpu/drm/xe/xe_vsec.c b/drivers/gpu/drm/xe/xe_vsec.c
index a8afef731379..a0a154657816 100644
--- a/drivers/gpu/drm/xe/xe_vsec.c
+++ b/drivers/gpu/drm/xe/xe_vsec.c
@@ -15,6 +15,16 @@
#define SOC_BASE 0x280000
+/* from drivers/platform/x86/intel/pmt/telemetry.c */
+#define TELEM_BASE_OFFSET 0x8
+
+#define DG2_PMT_BASE 0xE8000
+#define DG2_DISCOVERY_START 0x6000
+#define DG2_TELEM_START 0x4000
+
+#define DG2_DISCOVERY_OFFSET (SOC_BASE + DG2_PMT_BASE + DG2_DISCOVERY_START)
+#define DG2_TELEM_OFFSET (SOC_BASE + DG2_PMT_BASE + DG2_TELEM_START)
+
#define BMG_PMT_BASE 0xDB000
#define BMG_DISCOVERY_OFFSET (SOC_BASE + BMG_PMT_BASE)
@@ -27,6 +37,20 @@
#define SG_REMAP_ACCESS(_mem) ((_mem) << 24)
#define SG_REMAP_BITS GENMASK(31, 24)
+static struct intel_vsec_header dg2_telemetry = {
+ .length = 0x10,
+ .id = VSEC_ID_TELEMETRY,
+ .num_entries = 1,
+ .entry_size = 3,
+ .tbir = GFX_BAR,
+ .offset = DG2_DISCOVERY_OFFSET,
+};
+
+static struct intel_vsec_header *dg2_capabilities[] = {
+ &dg2_telemetry,
+ NULL
+};
+
static struct intel_vsec_header bmg_telemetry = {
.length = 0x10,
.id = VSEC_ID_TELEMETRY,
@@ -43,10 +67,16 @@ static struct intel_vsec_header *bmg_capabilities[] = {
enum xe_vsec {
XE_VSEC_UNKNOWN = 0,
+ XE_VSEC_DG2,
XE_VSEC_BMG,
};
static struct intel_vsec_platform_info xe_vsec_info[] = {
+ [XE_VSEC_DG2] = {
+ .caps = VSEC_CAP_TELEMETRY,
+ .headers = dg2_capabilities,
+ .quirks = VSEC_QUIRK_EARLY_HW,
+ },
[XE_VSEC_BMG] = {
.caps = VSEC_CAP_TELEMETRY,
.headers = bmg_capabilities,
@@ -166,6 +196,7 @@ struct pmt_callbacks xe_pmt_cb = {
};
static const int vsec_platforms[] = {
+ [XE_DG2] = XE_VSEC_DG2,
[XE_BATTLEMAGE] = XE_VSEC_BMG,
};
@@ -177,6 +208,49 @@ static enum xe_vsec get_platform_info(struct xe_device *xe)
return vsec_platforms[xe->info.platform];
}
+/*
+ * Access the DG2 PMT MMIO discovery table
+ *
+ * The intel_vsec driver does not typically access the discovery table.
+ * Instead, it creates a memory resource for the table and passes it
+ * to the PMT telemetry driver. Each discovery table contains 3 items,
+ * - GUID
+ * - Telemetry size
+ * - Telemetry offset (offset from P2SB BAR, not GT)
+ *
+ * For DG2 we know what the telemetry offset is, but we still need to
+ * use the discovery table to pass the GUID and the size. So figure
+ * out the difference between the P2SB offset and the GT offset and
+ * save this so that the telemetry driver can use it to adjust the
+ * value.
+ */
+static int dg2_adjust_offset(struct pci_dev *pdev, struct device *dev,
+ struct intel_vsec_platform_info *info)
+{
+ void __iomem *base;
+ u32 telem_offset;
+ u64 addr;
+
+ /* compile check to verify that quirk has P2SB quirk added */
+
+ addr = pci_resource_start(pdev, GFX_BAR) + info->headers[0]->offset;
+ base = ioremap_wc(addr, 16);
+ if (!base)
+ return -ENOMEM;
+
+ telem_offset = readl(base + TELEM_BASE_OFFSET);
+
+ /* Use the base_addr + P2SB quirk to pass this info */
+ if (telem_offset < DG2_TELEM_OFFSET)
+ info->base_adjust = -(DG2_TELEM_OFFSET - telem_offset);
+ else
+ info->base_adjust = -(telem_offset - DG2_TELEM_OFFSET);
+
+ iounmap(base);
+
+ return 0;
+}
+
/**
* intel_vsec_init - Initialize resources and add intel_vsec auxiliary
* interface
@@ -188,6 +262,7 @@ void xe_vsec_init(struct xe_device *xe)
struct device *dev = xe->drm.dev;
struct pci_dev *pdev = to_pci_dev(dev);
enum xe_vsec platform;
+ u32 ret;
platform = get_platform_info(xe);
if (platform == XE_VSEC_UNKNOWN)
@@ -198,6 +273,12 @@ void xe_vsec_init(struct xe_device *xe)
return;
switch (platform) {
+ case XE_VSEC_DG2:
+ ret = dg2_adjust_offset(pdev, dev, info);
+ if (ret)
+ return;
+ break;
+
case XE_VSEC_BMG:
info->priv_data = &xe_pmt_cb;
break;
--
2.44.0
