Hi, On 4/21/24 9:11 PM, Armin Wolf wrote: > Add a new driver for the MSI WMI Platform interface. The underlying > ACPI WMI interface supports many features, but so far only reading > of fan speed sensors is implemented. > > The driver was reverse-engineered based on a user request to the > lm-sensors project, see the github issue for details. > > The ACPI WMI interface used by this driver seems to use the same > embedded controller interface as the msi-ec driver, but supports > automatic discovery of supported machines without relying on a > DMI whitelist. > > The driver was tested by the user who created the github issue. > > Closes: https://github.com/lm-sensors/lm-sensors/issues/475 > Signed-off-by: Armin Wolf <W_Armin@xxxxxx> Thank you for your patch, I've applied this patch to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while. Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > --- > .../ABI/testing/debugfs-msi-wmi-platform | 14 + > .../wmi/devices/msi-wmi-platform.rst | 194 ++++++++ > MAINTAINERS | 8 + > drivers/platform/x86/Kconfig | 11 + > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/msi-wmi-platform.c | 428 ++++++++++++++++++ > 6 files changed, 656 insertions(+) > create mode 100644 Documentation/ABI/testing/debugfs-msi-wmi-platform > create mode 100644 Documentation/wmi/devices/msi-wmi-platform.rst > create mode 100644 drivers/platform/x86/msi-wmi-platform.c > > diff --git a/Documentation/ABI/testing/debugfs-msi-wmi-platform b/Documentation/ABI/testing/debugfs-msi-wmi-platform > new file mode 100644 > index 000000000000..71f9992168d8 > --- /dev/null > +++ b/Documentation/ABI/testing/debugfs-msi-wmi-platform > @@ -0,0 +1,14 @@ > +What: /sys/kernel/debug/msi-wmi-platform-<wmi_device_name>/* > +Date: April 2024 > +KernelVersion: 6.10 > +Contact: Armin Wolf <W_Armin@xxxxxx> > +Description: > + This file allows to execute the associated WMI method with the same name. > + > + To start the execution, write a buffer containing the method arguments > + at file offset 0. Partial writes or writes at a different offset are not > + supported. > + > + The buffer returned by the WMI method can then be read from the file. > + > + See Documentation/wmi/devices/msi-wmi-platform.rst for details. > diff --git a/Documentation/wmi/devices/msi-wmi-platform.rst b/Documentation/wmi/devices/msi-wmi-platform.rst > new file mode 100644 > index 000000000000..29b1b2e6d42c > --- /dev/null > +++ b/Documentation/wmi/devices/msi-wmi-platform.rst > @@ -0,0 +1,194 @@ > +.. SPDX-License-Identifier: GPL-2.0-or-later > + > +=================================================== > +MSI WMI Platform Features driver (msi-wmi-platform) > +=================================================== > + > +Introduction > +============ > + > +Many MSI notebooks support various features like reading fan sensors. This features are controlled > +by the embedded controller, with the ACPI firmware exposing a standard ACPI WMI interface on top > +of the embedded controller interface. > + > +WMI interface description > +========================= > + > +The WMI interface description can be decoded from the embedded binary MOF (bmof) > +data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: > + > +:: > + > + [WMI, Locale("MS\0x409"), > + Description("This class contains the definition of the package used in other classes"), > + guid("{ABBC0F60-8EA1-11d1-00A0-C90629100000}")] > + class Package { > + [WmiDataId(1), read, write, Description("16 bytes of data")] uint8 Bytes[16]; > + }; > + > + [WMI, Locale("MS\0x409"), > + Description("This class contains the definition of the package used in other classes"), > + guid("{ABBC0F63-8EA1-11d1-00A0-C90629100000}")] > + class Package_32 { > + [WmiDataId(1), read, write, Description("32 bytes of data")] uint8 Bytes[32]; > + }; > + > + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\0x409"), > + Description("Class used to operate methods on a package"), > + guid("{ABBC0F6E-8EA1-11d1-00A0-C90629100000}")] > + class MSI_ACPI { > + [key, read] string InstanceName; > + [read] boolean Active; > + > + [WmiMethodId(1), Implemented, read, write, Description("Return the contents of a package")] > + void GetPackage([out, id(0)] Package Data); > + > + [WmiMethodId(2), Implemented, read, write, Description("Set the contents of a package")] > + void SetPackage([in, id(0)] Package Data); > + > + [WmiMethodId(3), Implemented, read, write, Description("Return the contents of a package")] > + void Get_EC([out, id(0)] Package_32 Data); > + > + [WmiMethodId(4), Implemented, read, write, Description("Set the contents of a package")] > + void Set_EC([in, id(0)] Package_32 Data); > + > + [WmiMethodId(5), Implemented, read, write, Description("Return the contents of a package")] > + void Get_BIOS([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(6), Implemented, read, write, Description("Set the contents of a package")] > + void Set_BIOS([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(7), Implemented, read, write, Description("Return the contents of a package")] > + void Get_SMBUS([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(8), Implemented, read, write, Description("Set the contents of a package")] > + void Set_SMBUS([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(9), Implemented, read, write, Description("Return the contents of a package")] > + void Get_MasterBattery([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(10), Implemented, read, write, Description("Set the contents of a package")] > + void Set_MasterBattery([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(11), Implemented, read, write, Description("Return the contents of a package")] > + void Get_SlaveBattery([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(12), Implemented, read, write, Description("Set the contents of a package")] > + void Set_SlaveBattery([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(13), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Temperature([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(14), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Temperature([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(15), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Thermal([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(16), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Thermal([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(17), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Fan([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(18), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Fan([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(19), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Device([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(20), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Device([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(21), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Power([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(22), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Power([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(23), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Debug([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(24), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Debug([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(25), Implemented, read, write, Description("Return the contents of a package")] > + void Get_AP([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(26), Implemented, read, write, Description("Set the contents of a package")] > + void Set_AP([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(27), Implemented, read, write, Description("Return the contents of a package")] > + void Get_Data([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(28), Implemented, read, write, Description("Set the contents of a package")] > + void Set_Data([in, out, id(0)] Package_32 Data); > + > + [WmiMethodId(29), Implemented, read, write, Description("Return the contents of a package")] > + void Get_WMI([out, id(0)] Package_32 Data); > + }; > + > +Due to a peculiarity in how Windows handles the ``CreateByteField()`` ACPI operator (errors only > +happen when a invalid byte field is ultimately accessed), all methods require a 32 byte input > +buffer, even if the Binay MOF says otherwise. > + > +The input buffer contains a single byte to select the subfeature to be accessed and 31 bytes of > +input data, the meaning of which depends on the subfeature being accessed. > + > +The output buffer contains a singe byte which signals success or failure (``0x00`` on failure) > +and 31 bytes of output data, the meaning if which depends on the subfeature being accessed. > + > +WMI method Get_EC() > +------------------- > + > +Returns embedded controller information, the selected subfeature does not matter. The output > +data contains a flag byte and a 28 byte controller firmware version string. > + > +The first 4 bits of the flag byte contain the minor version of the embedded controller interface, > +with the next 2 bits containing the major version of the embedded controller interface. > + > +The 7th bit signals if the embedded controller page chaged (exact meaning is unknown), and the > +last bit signals if the platform is a Tigerlake platform. > + > +The MSI software seems to only use this interface when the last bit is set. > + > +WMI method Get_Fan() > +-------------------- > + > +Fan speed sensors can be accessed by selecting subfeature ``0x00``. The output data contains > +up to four 16-bit fan speed readings in big-endian format. Most machines do not support all > +four fan speed sensors, so the remaining reading are hardcoded to ``0x0000``. > + > +The fan RPM readings can be calculated with the following formula: > + > + RPM = 480000 / <fan speed reading> > + > +If the fan speed reading is zero, then the fan RPM is zero too. > + > +WMI method Get_WMI() > +-------------------- > + > +Returns the version of the ACPI WMI interface, the selected subfeature does not matter. > +The output data contains two bytes, the first one contains the major version and the last one > +contains the minor revision of the ACPI WMI interface. > + > +The MSI software seems to only use this interface when the major version is greater than two. > + > +Reverse-Engineering the MSI WMI Platform interface > +================================================== > + > +.. warning:: Randomly poking the embedded controller interface can potentially cause damage > + to the machine and other unwanted side effects, please be careful. > + > +The underlying embedded controller interface is used by the ``msi-ec`` driver, and it seems > +that many methods just copy a part of the embedded controller memory into the output buffer. > + > +This means that the remaining WMI methods can be reverse-engineered by looking which part of > +the embedded controller memory is accessed by the ACPI AML code. The driver also supports a > +debugfs interface for directly executing WMI methods. Additionally, any safety checks regarding > +unsupported hardware can be disabled by loading the module with ``force=true``. > + > +More information about the MSI embedded controller interface can be found at the > +`msi-ec project <https://github.com/BeardOverflow/msi-ec>`_. > + > +Special thanks go to github user `glpnk` for showing how to decode the fan speed readings. > diff --git a/MAINTAINERS b/MAINTAINERS > index 3fb0fa67576d..846187625552 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -15041,6 +15041,14 @@ L: platform-driver-x86@xxxxxxxxxxxxxxx > S: Orphan > F: drivers/platform/x86/msi-wmi.c > > +MSI WMI PLATFORM FEATURES > +M: Armin Wolf <W_Armin@xxxxxx> > +L: platform-driver-x86@xxxxxxxxxxxxxxx > +S: Maintained > +F: Documentation/ABI/testing/debugfs-msi-wmi-platform > +F: Documentation/wmi/devices/msi-wmi-platform.rst > +F: drivers/platform/x86/msi-wmi-platform.c > + > MSI001 MEDIA DRIVER > L: linux-media@xxxxxxxxxxxxxxx > S: Orphan > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 168b57df0a6a..b744f18bbfa7 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -698,6 +698,17 @@ config MSI_WMI > To compile this driver as a module, choose M here: the module will > be called msi-wmi. > > +config MSI_WMI_PLATFORM > + tristate "MSI WMI Platform features" > + depends on ACPI_WMI > + depends on HWMON > + help > + Say Y here if you want to have support for WMI-based platform features > + like fan sensor access on MSI machines. > + > + To compile this driver as a module, choose M here: the module will > + be called msi-wmi-platform. > + > config XO15_EBOOK > tristate "OLPC XO-1.5 ebook switch" > depends on OLPC || COMPILE_TEST > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index 8076bf3a7e83..26b8af55738b 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -78,6 +78,7 @@ obj-$(CONFIG_ACPI_QUICKSTART) += quickstart.o > obj-$(CONFIG_MSI_EC) += msi-ec.o > obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o > obj-$(CONFIG_MSI_WMI) += msi-wmi.o > +obj-$(CONFIG_MSI_WMI_PLATFORM) += msi-wmi-platform.o > > # OLPC > obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o > diff --git a/drivers/platform/x86/msi-wmi-platform.c b/drivers/platform/x86/msi-wmi-platform.c > new file mode 100644 > index 000000000000..436fb91a47db > --- /dev/null > +++ b/drivers/platform/x86/msi-wmi-platform.c > @@ -0,0 +1,428 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Linux driver for WMI platform features on MSI notebooks. > + * > + * Copyright (C) 2024 Armin Wolf <W_Armin@xxxxxx> > + */ > + > +#define pr_format(fmt) KBUILD_MODNAME ": " fmt > + > +#include <linux/acpi.h> > +#include <linux/bits.h> > +#include <linux/bitfield.h> > +#include <linux/debugfs.h> > +#include <linux/device.h> > +#include <linux/device/driver.h> > +#include <linux/errno.h> > +#include <linux/hwmon.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/printk.h> > +#include <linux/rwsem.h> > +#include <linux/types.h> > +#include <linux/wmi.h> > + > +#include <asm/unaligned.h> > + > +#define DRIVER_NAME "msi-wmi-platform" > + > +#define MSI_PLATFORM_GUID "ABBC0F6E-8EA1-11d1-00A0-C90629100000" > + > +#define MSI_WMI_PLATFORM_INTERFACE_VERSION 2 > + > +#define MSI_PLATFORM_WMI_MAJOR_OFFSET 1 > +#define MSI_PLATFORM_WMI_MINOR_OFFSET 2 > + > +#define MSI_PLATFORM_EC_FLAGS_OFFSET 1 > +#define MSI_PLATFORM_EC_MINOR_MASK GENMASK(3, 0) > +#define MSI_PLATFORM_EC_MAJOR_MASK GENMASK(5, 4) > +#define MSI_PLATFORM_EC_CHANGED_PAGE BIT(6) > +#define MSI_PLATFORM_EC_IS_TIGERLAKE BIT(7) > +#define MSI_PLATFORM_EC_VERSION_OFFSET 2 > + > +static bool force; > +module_param_unsafe(force, bool, 0); > +MODULE_PARM_DESC(force, "Force loading without checking for supported WMI interface versions"); > + > +enum msi_wmi_platform_method { > + MSI_PLATFORM_GET_PACKAGE = 0x01, > + MSI_PLATFORM_SET_PACKAGE = 0x02, > + MSI_PLATFORM_GET_EC = 0x03, > + MSI_PLATFORM_SET_EC = 0x04, > + MSI_PLATFORM_GET_BIOS = 0x05, > + MSI_PLATFORM_SET_BIOS = 0x06, > + MSI_PLATFORM_GET_SMBUS = 0x07, > + MSI_PLATFORM_SET_SMBUS = 0x08, > + MSI_PLATFORM_GET_MASTER_BATTERY = 0x09, > + MSI_PLATFORM_SET_MASTER_BATTERY = 0x0a, > + MSI_PLATFORM_GET_SLAVE_BATTERY = 0x0b, > + MSI_PLATFORM_SET_SLAVE_BATTERY = 0x0c, > + MSI_PLATFORM_GET_TEMPERATURE = 0x0d, > + MSI_PLATFORM_SET_TEMPERATURE = 0x0e, > + MSI_PLATFORM_GET_THERMAL = 0x0f, > + MSI_PLATFORM_SET_THERMAL = 0x10, > + MSI_PLATFORM_GET_FAN = 0x11, > + MSI_PLATFORM_SET_FAN = 0x12, > + MSI_PLATFORM_GET_DEVICE = 0x13, > + MSI_PLATFORM_SET_DEVICE = 0x14, > + MSI_PLATFORM_GET_POWER = 0x15, > + MSI_PLATFORM_SET_POWER = 0x16, > + MSI_PLATFORM_GET_DEBUG = 0x17, > + MSI_PLATFORM_SET_DEBUG = 0x18, > + MSI_PLATFORM_GET_AP = 0x19, > + MSI_PLATFORM_SET_AP = 0x1a, > + MSI_PLATFORM_GET_DATA = 0x1b, > + MSI_PLATFORM_SET_DATA = 0x1c, > + MSI_PLATFORM_GET_WMI = 0x1d, > +}; > + > +struct msi_wmi_platform_debugfs_data { > + struct wmi_device *wdev; > + enum msi_wmi_platform_method method; > + struct rw_semaphore buffer_lock; /* Protects debugfs buffer */ > + size_t length; > + u8 buffer[32]; > +}; > + > +static const char * const msi_wmi_platform_debugfs_names[] = { > + "get_package", > + "set_package", > + "get_ec", > + "set_ec", > + "get_bios", > + "set_bios", > + "get_smbus", > + "set_smbus", > + "get_master_battery", > + "set_master_battery", > + "get_slave_battery", > + "set_slave_battery", > + "get_temperature", > + "set_temperature", > + "get_thermal", > + "set_thermal", > + "get_fan", > + "set_fan", > + "get_device", > + "set_device", > + "get_power", > + "set_power", > + "get_debug", > + "set_debug", > + "get_ap", > + "set_ap", > + "get_data", > + "set_data", > + "get_wmi" > +}; > + > +static int msi_wmi_platform_parse_buffer(union acpi_object *obj, u8 *output, size_t length) > +{ > + if (obj->type != ACPI_TYPE_BUFFER) > + return -ENOMSG; > + > + if (obj->buffer.length != length) > + return -EPROTO; > + > + if (!obj->buffer.pointer[0]) > + return -EIO; > + > + memcpy(output, obj->buffer.pointer, obj->buffer.length); > + > + return 0; > +} > + > +static int msi_wmi_platform_query(struct wmi_device *wdev, enum msi_wmi_platform_method method, > + u8 *input, size_t input_length, u8 *output, size_t output_length) > +{ > + struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; > + struct acpi_buffer in = { > + .length = input_length, > + .pointer = input > + }; > + union acpi_object *obj; > + acpi_status status; > + int ret; > + > + if (!input_length || !output_length) > + return -EINVAL; > + > + status = wmidev_evaluate_method(wdev, 0x0, method, &in, &out); > + if (ACPI_FAILURE(status)) > + return -EIO; > + > + obj = out.pointer; > + if (!obj) > + return -ENODATA; > + > + ret = msi_wmi_platform_parse_buffer(obj, output, output_length); > + kfree(obj); > + > + return ret; > +} > + > +static umode_t msi_wmi_platform_is_visible(const void *drvdata, enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + return 0444; > +} > + > +static int msi_wmi_platform_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, > + int channel, long *val) > +{ > + struct wmi_device *wdev = dev_get_drvdata(dev); > + u8 input[32] = { 0 }; > + u8 output[32]; > + u16 data; > + int ret; > + > + ret = msi_wmi_platform_query(wdev, MSI_PLATFORM_GET_FAN, input, sizeof(input), output, > + sizeof(output)); > + if (ret < 0) > + return ret; > + > + data = get_unaligned_be16(&output[channel * 2 + 1]); > + if (!data) > + *val = 0; > + else > + *val = 480000 / data; > + > + return 0; > +} > + > +static const struct hwmon_ops msi_wmi_platform_ops = { > + .is_visible = msi_wmi_platform_is_visible, > + .read = msi_wmi_platform_read, > +}; > + > +static const struct hwmon_channel_info * const msi_wmi_platform_info[] = { > + HWMON_CHANNEL_INFO(fan, > + HWMON_F_INPUT, > + HWMON_F_INPUT, > + HWMON_F_INPUT, > + HWMON_F_INPUT > + ), > + NULL > +}; > + > +static const struct hwmon_chip_info msi_wmi_platform_chip_info = { > + .ops = &msi_wmi_platform_ops, > + .info = msi_wmi_platform_info, > +}; > + > +static ssize_t msi_wmi_platform_write(struct file *fp, const char __user *input, size_t length, > + loff_t *offset) > +{ > + struct seq_file *seq = fp->private_data; > + struct msi_wmi_platform_debugfs_data *data = seq->private; > + u8 payload[32] = { }; > + ssize_t ret; > + > + /* Do not allow partial writes */ > + if (*offset != 0) > + return -EINVAL; > + > + /* Do not allow incomplete command buffers */ > + if (length != data->length) > + return -EINVAL; > + > + ret = simple_write_to_buffer(payload, sizeof(payload), offset, input, length); > + if (ret < 0) > + return ret; > + > + down_write(&data->buffer_lock); > + ret = msi_wmi_platform_query(data->wdev, data->method, payload, data->length, data->buffer, > + data->length); > + up_write(&data->buffer_lock); > + > + if (ret < 0) > + return ret; > + > + return length; > +} > + > +static int msi_wmi_platform_show(struct seq_file *seq, void *p) > +{ > + struct msi_wmi_platform_debugfs_data *data = seq->private; > + int ret; > + > + down_read(&data->buffer_lock); > + ret = seq_write(seq, data->buffer, data->length); > + up_read(&data->buffer_lock); > + > + return ret; > +} > + > +static int msi_wmi_platform_open(struct inode *inode, struct file *fp) > +{ > + struct msi_wmi_platform_debugfs_data *data = inode->i_private; > + > + /* The seq_file uses the last byte of the buffer for detecting buffer overflows */ > + return single_open_size(fp, msi_wmi_platform_show, data, data->length + 1); > +} > + > +static const struct file_operations msi_wmi_platform_debugfs_fops = { > + .owner = THIS_MODULE, > + .open = msi_wmi_platform_open, > + .read = seq_read, > + .write = msi_wmi_platform_write, > + .llseek = seq_lseek, > + .release = single_release, > +}; > + > +static void msi_wmi_platform_debugfs_remove(void *data) > +{ > + struct dentry *dir = data; > + > + debugfs_remove_recursive(dir); > +} > + > +static void msi_wmi_platform_debugfs_add(struct wmi_device *wdev, struct dentry *dir, > + const char *name, enum msi_wmi_platform_method method) > +{ > + struct msi_wmi_platform_debugfs_data *data; > + struct dentry *entry; > + > + data = devm_kzalloc(&wdev->dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return; > + > + data->wdev = wdev; > + data->method = method; > + init_rwsem(&data->buffer_lock); > + > + /* The ACPI firmware for now always requires a 32 byte input buffer due to > + * a peculiarity in how Windows handles the CreateByteField() ACPI operator. > + */ > + data->length = 32; > + > + entry = debugfs_create_file(name, 0600, dir, data, &msi_wmi_platform_debugfs_fops); > + if (IS_ERR(entry)) > + devm_kfree(&wdev->dev, data); > +} > + > +static void msi_wmi_platform_debugfs_init(struct wmi_device *wdev) > +{ > + struct dentry *dir; > + char dir_name[64]; > + int ret, method; > + > + scnprintf(dir_name, ARRAY_SIZE(dir_name), "%s-%s", DRIVER_NAME, dev_name(&wdev->dev)); > + > + dir = debugfs_create_dir(dir_name, NULL); > + if (IS_ERR(dir)) > + return; > + > + ret = devm_add_action_or_reset(&wdev->dev, msi_wmi_platform_debugfs_remove, dir); > + if (ret < 0) > + return; > + > + for (method = MSI_PLATFORM_GET_PACKAGE; method <= MSI_PLATFORM_GET_WMI; method++) > + msi_wmi_platform_debugfs_add(wdev, dir, msi_wmi_platform_debugfs_names[method - 1], > + method); > +} > + > +static int msi_wmi_platform_hwmon_init(struct wmi_device *wdev) > +{ > + struct device *hdev; > + > + hdev = devm_hwmon_device_register_with_info(&wdev->dev, "msi_wmi_platform", wdev, > + &msi_wmi_platform_chip_info, NULL); > + > + return PTR_ERR_OR_ZERO(hdev); > +} > + > +static int msi_wmi_platform_ec_init(struct wmi_device *wdev) > +{ > + u8 input[32] = { 0 }; > + u8 output[32]; > + u8 flags; > + int ret; > + > + ret = msi_wmi_platform_query(wdev, MSI_PLATFORM_GET_EC, input, sizeof(input), output, > + sizeof(output)); > + if (ret < 0) > + return ret; > + > + flags = output[MSI_PLATFORM_EC_FLAGS_OFFSET]; > + > + dev_dbg(&wdev->dev, "EC RAM version %lu.%lu\n", > + FIELD_GET(MSI_PLATFORM_EC_MAJOR_MASK, flags), > + FIELD_GET(MSI_PLATFORM_EC_MINOR_MASK, flags)); > + dev_dbg(&wdev->dev, "EC firmware version %.28s\n", > + &output[MSI_PLATFORM_EC_VERSION_OFFSET]); > + > + if (!(flags & MSI_PLATFORM_EC_IS_TIGERLAKE)) { > + if (!force) > + return -ENODEV; > + > + dev_warn(&wdev->dev, "Loading on a non-Tigerlake platform\n"); > + } > + > + return 0; > +} > + > +static int msi_wmi_platform_init(struct wmi_device *wdev) > +{ > + u8 input[32] = { 0 }; > + u8 output[32]; > + int ret; > + > + ret = msi_wmi_platform_query(wdev, MSI_PLATFORM_GET_WMI, input, sizeof(input), output, > + sizeof(output)); > + if (ret < 0) > + return ret; > + > + dev_dbg(&wdev->dev, "WMI interface version %u.%u\n", > + output[MSI_PLATFORM_WMI_MAJOR_OFFSET], > + output[MSI_PLATFORM_WMI_MINOR_OFFSET]); > + > + if (output[MSI_PLATFORM_WMI_MAJOR_OFFSET] != MSI_WMI_PLATFORM_INTERFACE_VERSION) { > + if (!force) > + return -ENODEV; > + > + dev_warn(&wdev->dev, "Loading despite unsupported WMI interface version (%u.%u)\n", > + output[MSI_PLATFORM_WMI_MAJOR_OFFSET], > + output[MSI_PLATFORM_WMI_MINOR_OFFSET]); > + } > + > + return 0; > +} > + > +static int msi_wmi_platform_probe(struct wmi_device *wdev, const void *context) > +{ > + int ret; > + > + ret = msi_wmi_platform_init(wdev); > + if (ret < 0) > + return ret; > + > + ret = msi_wmi_platform_ec_init(wdev); > + if (ret < 0) > + return ret; > + > + msi_wmi_platform_debugfs_init(wdev); > + > + return msi_wmi_platform_hwmon_init(wdev); > +} > + > +static const struct wmi_device_id msi_wmi_platform_id_table[] = { > + { MSI_PLATFORM_GUID, NULL }, > + { } > +}; > +MODULE_DEVICE_TABLE(wmi, msi_wmi_platform_id_table); > + > +static struct wmi_driver msi_wmi_platform_driver = { > + .driver = { > + .name = DRIVER_NAME, > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > + }, > + .id_table = msi_wmi_platform_id_table, > + .probe = msi_wmi_platform_probe, > + .no_singleton = true, > +}; > +module_wmi_driver(msi_wmi_platform_driver); > + > +MODULE_AUTHOR("Armin Wolf <W_Armin@xxxxxx>"); > +MODULE_DESCRIPTION("MSI WMI platform features"); > +MODULE_LICENSE("GPL"); > -- > 2.39.2 >
