[PATCH] platform/x86: dell-laptop: Implement platform_profile

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some Dell laptops support configuration of preset
fan modes through smbios tables.

If the platform supports these fan modes, set up
platform_profile to change these modes. If not
supported, skip enabling platform_profile.

Signed-off-by: Lyndon Sanche <lsanche@xxxxxxxxxx>
---
 drivers/platform/x86/dell/dell-laptop.c | 220 ++++++++++++++++++++++++
 drivers/platform/x86/dell/dell-smbios.h |   1 +
 2 files changed, 221 insertions(+)

diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c
index 42f7de2b4522..7f9c4e0e5ef5 100644
--- a/drivers/platform/x86/dell/dell-laptop.c
+++ b/drivers/platform/x86/dell/dell-laptop.c
@@ -27,6 +27,7 @@
 #include <linux/i8042.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/platform_profile.h>
 #include <acpi/video.h>
 #include "dell-rbtn.h"
 #include "dell-smbios.h"
@@ -95,10 +96,18 @@ static struct backlight_device *dell_backlight_device;
 static struct rfkill *wifi_rfkill;
 static struct rfkill *bluetooth_rfkill;
 static struct rfkill *wwan_rfkill;
+static struct platform_profile_handler *thermal_handler;
 static bool force_rfkill;
 static bool micmute_led_registered;
 static bool mute_led_registered;
 
+enum thermal_mode_bits {
+	DELL_BALANCED = 0,
+	DELL_COOL_BOTTOM = 1,
+	DELL_QUIET = 2,
+	DELL_PERFORMANCE = 3,
+};
+
 module_param(force_rfkill, bool, 0444);
 MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models");
 
@@ -2199,6 +2208,211 @@ static int mute_led_set(struct led_classdev *led_cdev,
 	return 0;
 }
 
+// Derived from smbios-thermal-ctl
+//
+// cbClass 17
+// cbSelect 19
+// User Selectable Thermal Tables(USTT)
+// cbArg1 determines the function to be performed
+// cbArg1 0x0 = Get Thermal Information
+//  cbRES1         Standard return codes (0, -1, -2)
+//  cbRES2, byte 0  Bitmap of supported thermal modes. A mode is supported if its bit is set to 1
+//     Bit 0 Balanced
+//     Bit 1 Cool Bottom
+//     Bit 2 Quiet
+//     Bit 3 Performance
+//  cbRES2, byte 1 Bitmap of supported Active Acoustic Controller (AAC) modes. Each mode
+//                 corresponds to the supported thermal modes in byte 0. A mode is supported if
+//                 its bit is set to 1.
+//     Bit 0 AAC (Balanced)
+//     Bit 1 AAC (Cool Bottom
+//     Bit 2 AAC (Quiet)
+//     Bit 3 AAC (Performance)
+//  cbRes3, byte 0 Current Thermal Mode
+//     Bit 0 Balanced
+//     Bit 1 Cool Bottom
+//     Bit 2 Quiet
+//     Bit 3 Performanc
+//  cbRes3, byte 1  AAC Configuration type
+//          0       Global (AAC enable/disable applies to all supported USTT modes)
+//          1       USTT mode specific
+//  cbRes3, byte 2  Current Active Acoustic Controller (AAC) Mode
+//     If AAC Configuration Type is Global,
+//          0       AAC mode disabled
+//          1       AAC mode enabled
+//     If AAC Configuration Type is USTT mode specific (multiple bits may be set),
+//          Bit 0 AAC (Balanced)
+//          Bit 1 AAC (Cool Bottom
+//          Bit 2 AAC (Quiet)
+//          Bit 3 AAC (Performance)
+//  cbRes3, byte 3  Current Fan Failure Mode
+//     Bit 0 Minimal Fan Failure (at least one fan has failed, one fan working)
+//     Bit 1 Catastrophic Fan Failure (all fans have failed)
+//  cbArg1 0x1   (Set Thermal Information), both desired thermal mode and
+//               desired AAC mode shall be applied
+//  cbArg2, byte 0  Desired Thermal Mode to set (only one bit may be set for this parameter)
+//     Bit 0 Balanced
+//     Bit 1 Cool Bottom
+//     Bit 2 Quiet
+//     Bit 3 Performance
+//  cbArg2, byte 1  Desired Active Acoustic Controller (AAC) Mode to set
+//     If AAC Configuration Type is Global,
+//         0  AAC mode disabled
+//         1  AAC mode enabled
+//
+//     If AAC Configuration Type is USTT mode specific (multiple bits may be set for this parameter),
+//         Bit 0 AAC (Balanced)
+//         Bit 1 AAC (Cool Bottom
+//         Bit 2 AAC (Quiet)
+//         Bit 3 AAC (Performance)
+static int thermal_get_mode(void)
+{
+	struct calling_interface_buffer buffer;
+	int state;
+	int ret;
+
+	dell_fill_request(&buffer, 0x0, 0, 0, 0);
+	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+	if (ret)
+		return ret;
+	state = buffer.output[2];
+	if ((state >> DELL_BALANCED) & 1)
+		return DELL_BALANCED;
+	else if ((state >> DELL_COOL_BOTTOM) & 1)
+		return DELL_COOL_BOTTOM;
+	else if ((state >> DELL_QUIET) & 1)
+		return DELL_QUIET;
+	else if ((state >> DELL_PERFORMANCE) & 1)
+		return DELL_PERFORMANCE;
+	else
+		return 0;
+}
+
+static int thermal_get_supported_modes(int *supported_bits)
+{
+	struct calling_interface_buffer buffer;
+	int ret;
+
+	dell_fill_request(&buffer, 0x0, 0, 0, 0);
+	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+	if (ret)
+		return ret;
+	*supported_bits = buffer.output[1] & 0xF;
+	return 0;
+}
+
+static int thermal_get_acc_mode(int *acc_mode)
+{
+	struct calling_interface_buffer buffer;
+	int ret;
+
+	dell_fill_request(&buffer, 0x0, 0, 0, 0);
+	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+	if (ret)
+		return ret;
+	*acc_mode = ((buffer.output[3] >> 8) & 0xFF);
+	return 0;
+}
+
+static int thermal_set_mode(enum thermal_mode_bits state)
+{
+	struct calling_interface_buffer buffer;
+	int ret;
+	int acc_mode;
+
+	ret = thermal_get_acc_mode(&acc_mode);
+	if (ret)
+		return ret;
+
+	dell_fill_request(&buffer, 0x1, (acc_mode << 8) | BIT(state), 0, 0);
+	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+	return ret;
+}
+
+static int thermal_platform_profile_set(struct platform_profile_handler *pprof,
+					enum platform_profile_option profile)
+{
+	int ret;
+
+	switch (profile) {
+	case PLATFORM_PROFILE_BALANCED:
+		ret = thermal_set_mode(DELL_BALANCED);
+		break;
+	case PLATFORM_PROFILE_PERFORMANCE:
+		ret = thermal_set_mode(DELL_PERFORMANCE);
+		break;
+	case PLATFORM_PROFILE_QUIET:
+		ret = thermal_set_mode(DELL_QUIET);
+		break;
+	case PLATFORM_PROFILE_COOL:
+		ret = thermal_set_mode(DELL_COOL_BOTTOM);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+static int thermal_platform_profile_get(struct platform_profile_handler *pprof,
+					enum platform_profile_option *profile)
+{
+	switch (thermal_get_mode()) {
+	case DELL_BALANCED:
+		*profile = PLATFORM_PROFILE_BALANCED;
+		break;
+	case DELL_PERFORMANCE:
+		*profile = PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case DELL_COOL_BOTTOM:
+		*profile = PLATFORM_PROFILE_COOL;
+		break;
+	case DELL_QUIET:
+		*profile = PLATFORM_PROFILE_QUIET;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int thermal_init(void)
+{
+	int ret;
+	int supported_modes;
+
+	ret = thermal_get_supported_modes(&supported_modes);
+
+	if (ret != 0 || supported_modes == 0)
+		return -ENXIO;
+
+	thermal_handler = kzalloc(sizeof(*thermal_handler), GFP_KERNEL);
+	if (!thermal_handler)
+		return -ENOMEM;
+	thermal_handler->profile_get = thermal_platform_profile_get;
+	thermal_handler->profile_set = thermal_platform_profile_set;
+
+	if ((supported_modes >> DELL_QUIET) & 1)
+		set_bit(PLATFORM_PROFILE_QUIET, thermal_handler->choices);
+	if ((supported_modes >> DELL_COOL_BOTTOM) & 1)
+		set_bit(PLATFORM_PROFILE_COOL, thermal_handler->choices);
+	if ((supported_modes >> DELL_BALANCED) & 1)
+		set_bit(PLATFORM_PROFILE_BALANCED, thermal_handler->choices);
+	if ((supported_modes >> DELL_PERFORMANCE) & 1)
+		set_bit(PLATFORM_PROFILE_PERFORMANCE, thermal_handler->choices);
+
+	platform_profile_register(thermal_handler);
+
+	return 0;
+}
+
+void thermal_cleanup(void)
+{
+	platform_profile_remove();
+	kfree(thermal_handler);
+}
+
 static struct led_classdev mute_led_cdev = {
 	.name = "platform::mute",
 	.max_brightness = 1,
@@ -2266,6 +2480,11 @@ static int __init dell_init(void)
 		mute_led_registered = true;
 	}
 
+	// Do not fail module if thermal modes not supported,
+	// just skip
+	if (thermal_init() != 0)
+		pr_warn("Unable to setup platform_profile, skipping");
+
 	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		return 0;
 
@@ -2344,6 +2563,7 @@ static void __exit dell_exit(void)
 		platform_device_unregister(platform_device);
 		platform_driver_unregister(&platform_driver);
 	}
+	thermal_cleanup();
 }
 
 /* dell-rbtn.c driver export functions which will not work correctly (and could
diff --git a/drivers/platform/x86/dell/dell-smbios.h b/drivers/platform/x86/dell/dell-smbios.h
index eb341bf000c6..585d042f1779 100644
--- a/drivers/platform/x86/dell/dell-smbios.h
+++ b/drivers/platform/x86/dell/dell-smbios.h
@@ -19,6 +19,7 @@
 /* Classes and selects used only in kernel drivers */
 #define CLASS_KBD_BACKLIGHT 4
 #define SELECT_KBD_BACKLIGHT 11
+#define SELECT_THERMAL_MANAGEMENT 19
 
 /* Tokens used in kernel drivers, any of these
  * should be filtered from userspace access
-- 
2.42.0





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux